larouci2
عضو أساسي
Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM20)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1209700 [8952] 00000400
OPK_DATA : 025843819772C7B86130317DEEFCA484196D58DA44C4702F917B86299A61F8CB
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8952_020]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8952, EMMC, 16 GB
LU Count : 3 [0x01D1F000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : ZTE K88 [msm8952] [jasmine]
Brand : ZTE
Prod.Name : K88
Software : K88V1.0.0B28, 20160919.011848 [Mon Sep 19 01:24:32 CST 2016]
Android Ver. : 6.0.1
Patch Level : 2016-08-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 9.0
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM20)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1209700 [8952] 00000400
OPK_DATA : 025843819772C7B86130317DEEFCA484196D58DA44C4702F917B86299A61F8CB
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8952_020]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8952, EMMC, 16 GB
LU Count : 3 [0x01D1F000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : ZTE K88 [msm8952] [jasmine]
Brand : ZTE
Prod.Name : K88
Software : K88V1.0.0B28, 20160919.011848 [Mon Sep 19 01:24:32 CST 2016]
Android Ver. : 6.0.1
Patch Level : 2016-08-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 9.0
التعديل الأخير بواسطة المشرف: