ازالة قفل FRP لجهاز Xiaomi Redmi 10A 220233L2G

[ProfKefah]

السلام عليكم
والجهاز مطفأ اضغط مع الاستمرار على زري رفع وخفض الصوت
ووصله بالحاسوب مع تثبيت برنامج LIBUSB FILTER

1. Power off device2. Remove Install battery if needed
3. Connect USB cable to powered off device
4. For New sec. Press and Hold Both Volume keys for Brom Mode
5. For Old sec. Press and Hold Volume UP for Brom Mode
6. Do not press any Key for PreLoader Mode
7. Install drivers if needed
====================================


- Connection : Flash Mode
- Method : By Model
- Brand : Xiaomi
- Model : Redmi 10A (220233L2G)
- Process : Reset FRP
====================================


Authenticating  ...  DONE
Initializing ... DONE
====================================
 
Waiting for device ...
Device found
MediaTek USB Port (COM7)
Mode : BootRom
Port : COM7
Handshaking ...  DONE
Initializing :  DONE
Hw code: MT6765 - Helio P35/G35
Hw sub code: 8A00
Hw version: CA00
Sw version: 0000
Watchdog disable ...  DONE
Protection disable ...  DONE
Preparing Download Agent ...
DA Version : MTK_AllInOne_DA_v3.3001.12/30/2020.11:23_545866
Drivers : MediaTek Inc.
Driver Date : 11/06/2014
Driver Version : 2.0.1136.0
Handshaking : DONE
Loading Preloader : DONE
Booting device : DONE
Chip name :  [MT6765]
Syncing with DA : DONE


Identifying Hardware ID ...
====================================
ChipID 		:	MT6765
Software Ver 	:	0000
Hardware Ver 	:	CA00
Secure Ver 	:	00
BootLdr Ver	:	00
Ext RAM		:	0xC0000000
SRAM		:	0x0003A000
Storage		:	0x0E91000000
====================================
RAM Size	:	3.000 GB
SRAM Size	:	232.000 KB
Storage Size	:	58.266 GB
Storage Type	:	EMMC
====================================


Getting partition details : DONE
Partition count : 43


Searching FRP data...  DONE
Resetting FRP... 
USING ALGO - 1
Reset FRP DONE


Please disconnect device and reboot it manually


UAT PRO : 148.01 | 09 - تشرين*الثاني - 2022  [ 06:21:41 م ]


Elapsed Time  :  7 seconds

 

[iphon770]

رد: ازالة قفل FRP لجهاز Xiaomi Redmi 10A 220233L2G

جزاك الله خيرا اخي
بالتوفيق :icon30:

 

[kalbaza ahmed]

رد: ازالة قفل FRP لجهاز Xiaomi Redmi 10A 220233L2G

frp realmi 10a cm2
Card found : E75557F5 , v0153
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.34

Load IDB

ase v312457 Ok!

UserName and/or Password not set! Can't continue!

Load IDBase v312457 Ok!

Operation : Identify [ v2.34 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 08CD6312D71660FB32AD6060ECD42F4E
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 9253773602E7954FC981BCD81B05854ED3877B1394D886B44402832FBD6A4F7F
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : FF : Look for EMI
BROM : FF : EMI found!
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!

EMMC: CID : 9B0100593250303634000C5904CF3953
EMMC: VEN : UNKNOWN [0x9B] : OEM : 0 : ID : 593250303634 : PRV : 0x00
EMMC: VEN : UNKNOWN [0x9B] : Y2P064
EMMC: SNN : 207160527 ( 0x0C5904CF ) , MF : 3/2022

EMI : DEV : INFINITY
EMI : SRC : PRELOADER_INFINITY_0
EMI : CNT : 0008
EMI : Init EMI from INTERNAL DB

DA : SETUP EMI PARAMS FAILED!
ERROR : ABORT

Boot done!


Done!
Elapsed: 00:01:01

Reconnect Power/Cable!

Operation : Reset Settings/Format FS [ v2.34 ]

Mode : SMART RESET EXTRA

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 889BB20E6E9A0E10BA626643535E1334
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 4565AE2C55908F41E67727949AC4F580117A24E6008F7959E271759208C4A917
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : FF : Look for EMI
BROM : FF : EMI found!
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!

EMMC: CID : 9B01005932503036340062710984497F
EMMC: VEN : UNKNOWN [0x9B] : OEM : 0 : ID : 593250303634 : PRV : 0x00
EMMC: VEN : UNKNOWN [0x9B] : Y2P064
EMMC: SNN : 1651575172 ( 0x62710984 ) , MF : 4/2022

EMI : DEV : INFINITY
EMI : SRC : PRELOADER_INFINITY_1
EMI : CNT : 0008
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A000 [ 232,00 KB ]
DRAM: 0x100000000 [ 4,00 GB ]

EMMC: CID : 9B01005932503036340062710984497F
EMMC: VEN : UNKNOWN [0x9B] : OEM : 0 : ID : 593250303634 : PRV : 0x00
EMMC: VEN : UNKNOWN [0x9B] : Y2P064
EMMC: SNN : 1651575172 ( 0x62710984 ) , MF : 4/2022

EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x01000000 [ 16,00 MB ]
USER : 0xE8F800000 [ 58,24 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 83E2C1716FF34DA5A1F23B128B7B48DF

DA : USB : HIGH-SPEED

Boot done!


Done!
Elapsed: 00:02:05

Reconnect Power/Cable!

Operation : Reset Settings/Format FS [ v2.34 ]

Mode : FRP [ RESET PROTECTION ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...


Device not found!
>>> Check cable, battery, connection and drivers!

Reconnect Power/Cable!


Operation : Reset Settings/Format FS [ v2.34 ]

Mode : FRP [ RESET PROTECTION ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...


Device not found!
>>> Check cable, battery, connection and drivers!

Reconnect Power/Cable!


Operation : Identify [ v2.34 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 889BB20E6E9A0E10BA626643535E1334
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 4565AE2C55908F41E67727949AC4F580117A24E6008F7959E271759208C4A917
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : Xiaomi : Helio [G70][G80] | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!

EMMC: CID : 9B01005932503036340062710984497F
EMMC: VEN : UNKNOWN [0x9B] : OEM : 0 : ID : 593250303634 : PRV : 0x00
EMMC: VEN : UNKNOWN [0x9B] : Y2P064
EMMC: SNN : 1651575172 ( 0x62710984 ) , MF : 4/2022

EMI : DEV : INFINITY
EMI : SRC : PRELOADER_INFINITY_1
EMI : CNT : 0008
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00080000 [ 512,00 KB ]
DRAM: 0x100000000 [ 4,00 GB ]

EMMC: CID : 9B01005932503036340062710984497F
EMMC: VEN : UNKNOWN [0x9B] : OEM : 0 : ID : 593250303634 : PRV : 0x00
EMMC: VEN : UNKNOWN [0x9B] : Y2P064
EMMC: SNN : 1651575172 ( 0x62710984 ) , MF : 4/2022

EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x01000000 [ 16,00 MB ]
USER : 0xE8F800000 [ 58,24 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 83E2C1716FF34DA5A1F23B128B7B48DF

DA : USB : HIGH-SPEED

Boot done!

Product Brand : Redmi
Product Device : dandelion
Product Model : 220233L2G
Product Name : dandelion_global2
Patch Level : RP1A.200720.011
Display ID : RP1A.200720.011
Ver. CodeName : REL
Ver. Release : 11
Sec. Patch : 2022-09-01
Build Time : 13.09.2022
Product Info : dandelion
Product Manfct : Xiaomi
Product Board : dandelion
Board Platform : mt6765

USERDATA : FILESYSTEM : F2FS with FBE ( File-Base Encryption )

NVRAM : LCSH_Q0MP1_MT6762_SP_MDBIN_PCB01_MT6765_S00.MOLY_LR12A_R3_MP_V134_2_P32
NVRAM : 0xBC0AEFEC
NVRAM : State : Ok!
NVRAM : SecLv : Vendor Signed
INFO : WiFi MAC : 000000000000
INFO : BlTh MAC : 00C30A370C0B
INFO : IMEI[1] : 869075064596994
INFO : IMEI[2] : 869075064597000


Backup sensetive data [ 20 ]
Backup path : Backup\MT6765__889BB20E6E9A0E10BA626643535E1334\
[31] Read : NVRAM
[13] Read : NVDATA
[21] Read : PROINFO
[32] Read : LK
[12] Read : NVCFG
[16] Read : PROTECT1
[1] Read : PGPT
[19] Read : PERSIST
[0] Read : PRELOADER
Backup done!


STORAGE : Life Status : eMMC : OK!
STORAGE : OTP Status : UNLOCKED!
STORAGE : RPMB Status : eMMC : RPMB KEY PROGRAMMED [UNUSABLE]

PRELOADER : DEVICE :
DEV : MT6765
NME : preloader_k62v1_64_bsp.bin
CNT : 0009
EMI : [00] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 512,00 MB ]
EMI : [01] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 2,00 GB ]
EMI : [02] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4,00 GB ]
EMI : [03] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4,00 GB ]
EMI : [04] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 3,00 GB ]
EMI : [05] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 6,00 GB ]
EMI : [06] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 3,00 GB ]
EMI : [07] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 2,00 GB ]
EMI : [08] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 6,00 GB ]
PRELOADER saved to : Backup\PRELOADER\preloader_k62v1_64_bsp.bin

Done!
Elapsed: 00:00:52

Operation : Read Firmware [ v2.34 ]

ExtSparse : Enabled
ForceRead : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 889BB20E6E9A0E10BA626643535E1334
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 4565AE2C55908F41E67727949AC4F580117A24E6008F7959E271759208C4A917
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : Xiaomi : Helio [G70][G80] | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!

EMMC: CID : 9B01005932503036340062710984497F
EMMC: VEN : UNKNOWN [0x9B] : OEM : 0 : ID : 593250303634 : PRV : 0x00
EMMC: VEN : UNKNOWN [0x9B] : Y2P064
EMMC: SNN : 1651575172 ( 0x62710984 ) , MF : 4/2022

EMI : DEV : INFINITY
EMI : SRC : PRELOADER_INFINITY_1
EMI : CNT : 0008
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00080000 [ 512,00 KB ]
DRAM: 0x100000000 [ 4,00 GB ]

EMMC: CID : 9B01005932503036340062710984497F
EMMC: VEN : UNKNOWN [0x9B] : OEM : 0 : ID : 593250303634 : PRV : 0x00
EMMC: VEN : UNKNOWN [0x9B] : Y2P064
EMMC: SNN : 1651575172 ( 0x62710984 ) , MF : 4/2022

EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x01000000 [ 16,00 MB ]
USER : 0xE8F800000 [ 58,24 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 83E2C1716FF34DA5A1F23B128B7B48DF

DA : USB : HIGH-SPEED

Boot done!

Product Brand : Redmi
Product Device : dandelion
Product Model : 220233L2G
Product Name : dandelion_global2
Patch Level : RP1A.200720.011
Display ID : RP1A.200720.011
Ver. CodeName : REL
Ver. Release : 11
Sec. Patch : 2022-09-01
Build Time : 13.09.2022
Product Info : dandelion
Product Manfct : Xiaomi
Product Board : dandelion
Board Platform : mt6765

MT6765__Xiaomi__220233L2G__11__RP1A.200720.011__RP1A.200720.011__dandelion

Read : preloader.bin
Read : recovery.img
Read : cust.img
ExtSparse : Compression ratio : 8%
Read : vbmeta_system.img
Read : vbmeta_vendor.img
Read : persist.img
ExtSparse : Compression ratio : 97%
Read : proinfo.img
Read : efuse.img
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : dtbo.img
Read : tz.img
Read : super.img
ExtSparse : Compression ratio : 22%
Read : vbmeta.img
Read : cache.img
Read : userdata.img

FW Size : 4,55 GB
Android Info saved : _Android_info.txt
Scatter : MT6765_Android_scatter.txt
Saved to : C:\Users\HAMADA\Documents\samsung\MT6765__Xiaomi__220233L2G__11__RP1A.200720.011__RP1A.200720.011__dandelion\

Done!
Elapsed: 00:09:16

Operation : Reset Settings/Format FS [ v2.34 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 889BB20E6E9A0E10BA626643535E1334
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 4565AE2C55908F41E67727949AC4F580117A24E6008F7959E271759208C4A917
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : Xiaomi : Helio [G70][G80] | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!

EMMC: CID : 9B01005932503036340062710984497F
EMMC: VEN : UNKNOWN [0x9B] : OEM : 0 : ID : 593250303634 : PRV : 0x00
EMMC: VEN : UNKNOWN [0x9B] : Y2P064
EMMC: SNN : 1651575172 ( 0x62710984 ) , MF : 4/2022

EMI : DEV : INFINITY
EMI : SRC : PRELOADER_INFINITY_1
EMI : CNT : 0008
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00080000 [ 512,00 KB ]
DRAM: 0x100000000 [ 4,00 GB ]

EMMC: CID : 9B01005932503036340062710984497F
EMMC: VEN : UNKNOWN [0x9B] : OEM : 0 : ID : 593250303634 : PRV : 0x00
EMMC: VEN : UNKNOWN [0x9B] : Y2P064
EMMC: SNN : 1651575172 ( 0x62710984 ) , MF : 4/2022

EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x01000000 [ 16,00 MB ]
USER : 0xE8F800000 [ 58,24 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 83E2C1716FF34DA5A1F23B128B7B48DF

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x835657

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA
Format Ok : USERDATA

Done!
Elapsed: 00:00:32

Reconnect Power/Cable!