عمل فورمات وازالة قفل FRP ل Realme C21 Y RMX3261

[ProfKefah]

السلام عليكم
والجهاز مقفل مع ضغط زري خفض ورفع الصوت وصله بالحاسوب

طراز جهازي كان RMX3261 لكن لم ينجح الا مع الطراز 3263
ايضا احتجت الى vpn

[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]1. Device must be Power off with battery inside[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]2. Press and Hold VOl-, or some phones requires press and hold VOl- and VOL+ together[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]3. Insert usb cable[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]4. Install spd drivers if needed[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]====================================[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]- Connection : Flash Mode[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]- Brand : RealMe[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]- Model : Realme C21Y (RMX3263)[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]- Process : Format | Factory Reset[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]====================================[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Waiting for device port ...[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Port found[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Port : [ COM17 : SPRD U2S Diag ][/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Handshaking with device ...[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Handshake done[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Protocol : SPRD3[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Detected SoC : Unisoc Tiger T610[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Sending config :  OK[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Sending Boot [UAT PRO.boot1] : DONE[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Sending Boot [UAT PRO.boot2] : DONE[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]BootVersion : Spreadtrum Boot Block version 1.1[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Formatting Userdata please wait ...[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Format userdata done[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]UAT PRO : 147.02 | 27 - تشرين الأول - 2022  [ 04:04:07 م ][/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Elapsed Time  :  1 minutes 5 seconds[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]1. Device must be Power off with battery inside[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]2. Press and Hold VOl-, or some phones requires press and hold VOl- and VOL+ together[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]3. Insert usb cable[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]4. Install spd drivers if needed[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]====================================[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]- Connection : Flash Mode[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]- Brand : RealMe[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]- Model : Realme C21Y (RMX3263)[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]- Process : Format | FRP[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]====================================[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Waiting for device port ...[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Port found[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Port : [ COM17 : SPRD U2S Diag ][/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Handshaking with device ...[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Handshake done[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Protocol : SPRD3[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Detected SoC : Unisoc Tiger T610[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Sending config :  OK[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Sending Boot [UAT PRO.boot1] : DONE[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Sending Boot [UAT PRO.boot2] : DONE[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]BootVersion : Spreadtrum Boot Block version 1.1[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Reseting Frp please wait ...[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Reset Frp done[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Formatting Userdata please wait ...[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Format userdata done[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]UAT PRO : 147.02 | 27 - تشرين الأول - 2022  [ 04:25:40 م ][/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Elapsed Time  :  1 minutes 6 seconds[/FONT][/COLOR]

​

 

[AndroPhone Software]

رد: عمل فورمات وازالة قفل FRP ل Realme C21 Y RMX3261

بارك الله فيك على مشاركة التجربة

جزاك الله كل خير
​

كانت لي معه سابقا نفس التجربة
لا يدخل للريكوفري مود
ولا يقبل الفورمات SPRD boot Mod
وكان الحل استخدام Avenger Tool
بتحويل البوت من SPRD الى DIAG
وعمل Factory Reset ​

 

[ProfKefah]

رد: عمل فورمات وازالة قفل FRP ل Realme C21 Y RMX3261

تحية طيبه لكم
وشكرا على المشاركها