السلام عليكم ورحمة الله وبركاته
Repair Boot Huawei P8 LITE (PRA-LX1) By Octoplus Huawei+ UnlockToo
No fastboot mode
No Upgrade Mode
No USB COM 1.0
توصيل الهاتف وضع
test point (USB COM 1.0 )
WRITE FIRMWRE
وكتابة CERT UnlockTool-
ملاحظة : الفلاشة حصرية خاصة بــــــــــــــــ Octoplus Huawei
سيتم اضافتها مع ملف اصلاح الايمي cert
https://support.dzgsm.com/
Repair Boot Huawei P8 LITE (PRA-LX1) By Octoplus Huawei+ UnlockToo
No fastboot mode
No Upgrade Mode
No USB COM 1.0
توصيل الهاتف وضع
test point (USB COM 1.0 )
WRITE FIRMWRE
كود:
Welcome to Octoplus Huawei Software v.1.2.8
To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode
To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode
To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'
Found COM ports:
1: COM1 Nuvoton Communications Port
Job ID: xxxxxxxxxxxxxx
2022-01-25 21:50:44
Starting Write Backup
Selected phone model: PRA-LX1
Searching HUAWEI USB COM 1.0 port...
Detected HUAWEI USB COM 1.0 port
Writing bootloader KIRIN655_A6.0_V1...
Initializing remote service connection...
Writing XLOADER partition...
Writing FASTBOOT partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: 8NHDU18928001474
Device Model: [COLOR="#FF0000"]PRA-LX1[/COLOR]
System: [COLOR="#4B0082"]PRA-LX1C432B213[/COLOR]
IMEI A: xxxxxxxxxxxxxxxxxxx
IMEI B: xxxxxxxxxxxxxxxxxxx
S/N: 8xxxxxxxxxxxxxxxxxx4
Verifying backup files
Writing BOOT partition...
Writing CACHE partition...
Writing CUST partition...
Writing 1 chunk from 2...
Writing 2 chunk from 2...
Writing DFX partition...
Writing DTS partition...
Writing FASTBOOT partition...
Writing FRP partition...
Writing FW_HIFI partition...
Writing FW_LPM3 partition...
Writing HISITEST0 partition...
Writing HISITEST1 partition...
Writing HISITEST2 partition...
Writing MISC partition...
Writing MODEM_FW partition...
Writing MODEM_OM partition...
Writing MODEMNVM_BACKUP partition...
Writing MODEMNVM_FACTORY partition...
Writing MODEMNVM_IMG partition...
Writing MODEMNVM_SYSTEM partition...
Writing MODEMNVM_UPDATE partition...
Writing NVME partition...
Writing OEMINFO partition...
Writing PERSIST partition...
Writing PTABLE partition...
Writing RECOVERY partition...
Warning: Writing recovery partition failed
Writing RECOVERY2 partition...
Warning: Writing recovery2 partition failed
Writing RESERVED1 partition...
Writing RESERVED2 partition...
Writing RESERVED3 partition...
Writing RESERVED4 partition...
Writing RESERVED5 partition...
Writing RESERVED6 partition...
Writing RESERVED7 partition...
Writing RESERVED8 partition...
Writing SECURE_STORAGE partition...
Writing SENSORHUB partition...
Writing SPLASH2 partition...
Writing SYSTEM partition...
Writing 1 chunk from 5...
Writing 2 chunk from 5...
Writing 3 chunk from 5...
Writing 4 chunk from 5...
Writing 5 chunkوكتابة CERT UnlockTool-
ملاحظة : الفلاشة حصرية خاصة بــــــــــــــــ Octoplus Huawei
سيتم اضافتها مع ملف اصلاح الايمي cert
https://support.dzgsm.com/
