السلام عليكم
الجهاز به خلل ذاكرة
الجهاز به خلل ذاكرة
هذه قايمة الذاكرة البديلة
eMMC Vendor ID : 15 (Samsung eMMC)
eMMC Model ID : 0001
eMMC Name : FN62MB
eMMC CID : 150100464E36324D42
eMMC Vendor ID : 15 (Samsung eMMC)
eMMC Model ID : 0001
eMMC Name : FE62MB
eMMC CID : 150100464536324D42
eMMC Vendor ID : 90 (Hynix eMMC)
eMMC Model ID : 4A01
eMMC Name : H8G4a2
eMMC CID : 90014A483847346132
eMMC Vendor ID : 88 (Foresee eMMC)
eMMC Model ID : 0301
eMMC Name : EPB100
eMMC CID : 880103455042313030
eMMC Vendor ID : 13 (Micron eMMC)
eMMC Model ID : 4E01
eMMC Name : S0J9H6
eMMC CID : 13014E53304A394836
eMMC Vendor ID : 70 (Kingston eMMC)
eMMC Model ID : 0001
eMMC Name : EH8EE8
eMMC CID : 700100454838454538
eMMC Vendor ID : 70 (Kingston eMMC)
eMMC Model ID : 0001
eMMC Name : EH8CD8
eMMC CID : 700100454838434438
عند كتابة ملف سكاتر بمبرمجة تعطيني خلل
Writing. Please wait...
Switched to boot area partition 1.
Writing partition preloader...
Write data verification is enabled.
Read/write verification error. Possible reasons: flash memory damaged or write protected.
Disconnected.
بالرغم من سلامة الذاكرة تم تجريب ذاكرتين بنفس الاسم FE62MB
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC FE62MB
Page size : 512 B
Block size : 512 B
Block count : 30535680
Size : 14.56 GB (14910.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100464536324D4203E453067E853D
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : FE62MB
Product revision : 0.3
Product serial number : (hex) E453067E
Manufacturing date : 08/2018
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7626752 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/FE62MB_11_10_2021_15_17_28.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.2; FW: 1.24.
---------------------------------------------------------------
Searching Android build info...
Not found
لم اجد ملف update firmware لذاكرة FE62MB
ممكن ملف srf
