فلاشات ♥ قلاشــwiko darkmoonــــة مسحوبــــnckــــة ♥

pera

:: عضو محترف ::, ,
إنضم
19 مايو 2016
المشاركات
1,825
مستوى التفاعل
1,584
النقاط
113


نقدم لكم في هدا الموضوع فلاشة WIKO DARKMOON مسحوبة بــNCK



>>الهاتف


>>انفو الهاتف
كود:
 Action : Boot Info. Selected 0-By CPU:ELBRUS
 Exe version: NCKDongle AndroidMTK 2.6.3
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM16)
 Boot mode: Preloader
 BBCHIP: 6582 1 ca01
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6582
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (28Gb+8192Mb) HYNIX 0x483447316404 
 EMMC FW VERSION: 86:00:00:00:00:00:00:00
 EMMC CID: 90014A483447316404 : 00000000000000
 EMMC UA SIZE: 0xe7000000      
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe7600000       [3.615 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM3)
 Build ID: JDQ39
 Display ID: ALPS.JB5.MP.V1.6
 Version: 4.2.2
 Build Date: Wed Apr 16 10:41:21 CST 2014
 Model: DARKMOON
 Brand: WIKO
 Device: wiko
 Manufacturer: Enspert
 Region: US
 Mediatek Version Release: ALPS.JB5.MP.V1.6
 IMEI[1]: 350000000000000
 IMEI[2]: 350000000000000
 Wait untill phone will start charging.
 [0]All done.

>>انفو السحب


كود:
 Action : Read Firmware. Selected 0-By CPU:ELBRUS
 Exe version: NCKDongle AndroidMTK 2.6.3
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM16)
 Boot mode: Preloader
 BBCHIP: 6582 1 ca01
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6582
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (28Gb+8192Mb) HYNIX 0x483447316404 
 EMMC FW VERSION: 86:00:00:00:00:00:00:00
 EMMC CID: 90014A483447316404 : 00000000000000
 EMMC UA SIZE: 0xe7000000      
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe7600000       [3.615 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM3)
 Build ID: JDQ39
 Display ID: ALPS.JB5.MP.V1.6
 Version: 4.2.2
 Build Date: Wed Apr 16 10:41:21 CST 2014
 Model: DARKMOON
 Brand: WIKO
 Device: wiko
 Manufacturer: Enspert
 Region: US
 Mediatek Version Release: ALPS.JB5.MP.V1.6
 IMEI[1]: 350000000000000
 IMEI[2]: 350000000000000
 Dumping Preloader.
 Partition: PRELOADER
 Partition: MBR
 Partition: EBR1
 Partition: PRO_INFO
 Partition: NVRAM
 Partition: PROTECT_F
 Partition: PROTECT_S
 Partition: SECCFG
 Partition: UBOOT
 Partition: BOOTIMG
 Partition: RECOVERY
 Partition: SEC_RO
 Partition: MISC
 Partition: LOGO
 Partition: EBR2
 Partition: EXPDB
 Partition: ANDROID
 Partition: CACHE
 Partition: USRDATA
 Partition: FAT
 Partition: BMTPOOL
 Start dumping flash, this can take up to 1 hour.......
 Start processing proinfo
 Reading:  BEGIN: 0x1500000        - LEN: 0x300000        
 Start processing nvram
 IMEI[1] from NVRAM: 359754050547040
 IMEI[2] from NVRAM: 359754050651040
 Start processing PROTECT_F
 Reading:  BEGIN: 0x1d00000        - LEN: 0xa00000        
 Start processing PROTECT_S
 Reading:  BEGIN: 0x2700000        - LEN: 0xa00000        
 Start processing UBOOT 
 Start processing BOOTIMG 
 Start processing RECOVERY 
 Start processing LOGO ......
 Start processing system
 Reading:  BEGIN: 0x5180000        - LEN: 0x2bc00000      
 Saved to : C:\Users\Mus\Documents\Android_MTK\firmware_backup\MT6582_EMMC_JDQ39__4_2_2_DARKMOON_WIKO_2020_01_15_22_33)
 Wait untill phone will start charging.
 [0]All done.


>>الفلاشة
https://mega.nz/#!iPRFGKgS!yAUl2Gw_iq-xImRUTCrq1ufHGhSUiguPadE8WZeBqkI
>> NAVRAM
https://mega.nz/#!XKYhTIqA!1uFxBxmIDjzIPOLXvToXyVL2tIO8k5WJF_qbDGNzg9c








 

ALICHAIMA

:: عضو محترف ::
إنضم
6 يناير 2016
المشاركات
973
مستوى التفاعل
639
النقاط
93
الإقامة
DZGSM
رد: ♥ قلاشــwiko darkmoonــــة مسحوبــــnckــــة ♥

شكرا اخي الكريم
 
أعلى