[url=https://www.0zz0.com]
[/URL]
اقدم لكم اعضاء و زوار المنتدى فلاشة WIKO FIZZ مسحوبة بدونغل NCK
[/URL]
[/URL]
[/URL]
https://mega.nz/#!1hVHRCQJ!ZftHMVOGEFfF4SazUzWgyt8tQz1nb2h0a8GQn5NZjQ8
[url=https://www.0zz0.com]
[/URL]
[url=https://www.0zz0.com]
[/URL]
[/URL]اقدم لكم اعضاء و زوار المنتدى فلاشة WIKO FIZZ مسحوبة بدونغل NCK
الهاتف
[url=https://www.0zz0.com]
[/URL]انفو الهاتف
كود:
Action : Boot Info.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.6.3
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM16)
Boot mode: Preloader
BBCHIP: 6572 0 ca00
Using Algo 1.
Scatter file loaded, not need emmi.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6572
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (28Gb+4096Mb) HYNIX 0x483447316404
EMMC FW VERSION: 86:00:00:00:00:00:00:00
EMMC CID: 90014A483447316404 : 00000000000000
EMMC UA SIZE: 0xe7000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe7600000 [3.615 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM3)
Build ID: JDQ39
Display ID: ALPS.JB3.MP.V1
Version: 4.2.2
Build Date: Fri Jun 20 11:27:03 CST 2014
Model: FIZZ
Brand: WIKO
Device: wiko
Manufacturer: Enspert
Region: US
Mediatek Version Release: ALPS.JB3.MP.V1
Phone have OTP partition.
Wait untill phone will start charging.
[0]All done.انفو السحب
[url=https://www.0zz0.com]
[/URL]
كود:
Action : Read Firmware.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.6.3
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM16)
Boot mode: Preloader
BBCHIP: 6572 0 ca00
Using Algo 1.
Scatter file loaded, not need emmi.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6572
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (28Gb+4096Mb) HYNIX 0x483447316404
EMMC FW VERSION: 86:00:00:00:00:00:00:00
EMMC CID: 90014A483447316404 : 00000000000000
EMMC UA SIZE: 0xe7000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe7600000 [3.615 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM3)
Build ID: JDQ39
Display ID: ALPS.JB3.MP.V1
Version: 4.2.2
Build Date: Fri Jun 20 11:27:03 CST 2014
Model: FIZZ
Brand: WIKO
Device: wiko
Manufacturer: Enspert
Region: US
Mediatek Version Release: ALPS.JB3.MP.V1
Phone have OTP partition.
IMEI[1]: 353156061496009
IMEI[2]: 353156061541507
Dumping Preloader.
Partition: PRELOADER
Partition: MBR
Partition: EBR1
Partition: PRO_INFO
Partition: NVRAM
Partition: PROTECT_F
Partition: PROTECT_S
Partition: SECCFG
Partition: UBOOT
Partition: BOOTIMG
Partition: RECOVERY
Partition: SEC_RO
Partition: MISC
Partition: LOGO
Partition: EXPDB
Partition: ANDROID
Partition: CACHE
Partition: USRDATA
Partition: OTP
Partition: BMTPOOL
Start dumping flash, this can take up to 1 hour.......
Start processing MBR MBR
Reading: BEGIN: 0x600000 - LEN: 0x80000
Start processing EBR1 EBR1
Reading: BEGIN: 0x680000 - LEN: 0x80000
Start processing proinfo
Reading: BEGIN: 0x700000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: 353156061496009
IMEI[2] from NVRAM: 353156061541507
Start processing PROTECT_F
Reading: BEGIN: 0xf00000 - LEN: 0xa00000
Start processing PROTECT_S
Reading: BEGIN: 0x1900000 - LEN: 0xa00000
Start processing UBOOT
Start processing BOOTIMG
Start processing RECOVERY
Start processing SEC_RO secro.img
Reading: BEGIN: 0x2f80000 - LEN: 0x40000
Start processing LOGO ......
Start processing system
Reading: BEGIN: 0x3d40000 - LEN: 0x38400000
Saved to : C:\Users\Mus\Documents\Android_MTK\firmware_backup\MT6572_EMMC_JDQ39__4_2_2_FIZZ_WIKO_2019_12_18_01_17)
Wait untill phone will start charging.
[0]All done.الفلاشة+NVRAM
[url=https://www.0zz0.com]
[/URL]https://mega.nz/#!1hVHRCQJ!ZftHMVOGEFfF4SazUzWgyt8tQz1nb2h0a8GQn5NZjQ8
[url=https://www.0zz0.com]
[/URL][url=https://www.0zz0.com]
[/URL]
