السلام عليكم ورحمه الله وبركاته
لدى مشكله فى جهاز p3100 لا يقبل الجيتاج مع العلم انى جاء الى جهازين بهم نفس المشكله
واحد مشى الموضوع تمام معاه واتصلح والاخر لا يقبل
هذا لوجو الجهاز الى اشتغل تمام
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Samsung P3100 XLoader+ V1.0.4800.44817]
Connecting to the target...OK
Set I/O Voltage reads as 2.60V, TCK Frequency is 8 MHz
Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0x3BA00477, IR Length = 0x04 bits
Device on TAP #1: ID = 0xFFFFFFFE, IR Length = 0x06 bits
Total IR length: 0x000A bits
Analizing IDCODE(s) of the JTAG scan chain:
1. 0x3BA00477: TI OMAP4430
وهذا لوجو الجهاز الذى لا يقبل الجيتاج
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Samsung P3100 XLoader+ V1.0.4800.44817]
Connecting to the target...OK
Set I/O Voltage reads as 2.60V, TCK Frequency is 8 MHz
Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0xFFFFFFFE, IR Length = 0x06 bits
Total IR length: 0x0006 bits
مع ملاحظ الفرق بين الاثنين فى السطور الحمراء فهيا لا توجود فى اجهاز الذى لايقب الجيتاج
فهل احد يعرف لماذا لا يظهر رقم الايدى وما حل هذه المشكله
ارجوا الافاده وشكرا
لدى مشكله فى جهاز p3100 لا يقبل الجيتاج مع العلم انى جاء الى جهازين بهم نفس المشكله
واحد مشى الموضوع تمام معاه واتصلح والاخر لا يقبل
هذا لوجو الجهاز الى اشتغل تمام
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Samsung P3100 XLoader+ V1.0.4800.44817]
Connecting to the target...OK
Set I/O Voltage reads as 2.60V, TCK Frequency is 8 MHz
Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0x3BA00477, IR Length = 0x04 bits
Device on TAP #1: ID = 0xFFFFFFFE, IR Length = 0x06 bits
Total IR length: 0x000A bits
Analizing IDCODE(s) of the JTAG scan chain:
1. 0x3BA00477: TI OMAP4430
وهذا لوجو الجهاز الذى لا يقبل الجيتاج
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Samsung P3100 XLoader+ V1.0.4800.44817]
Connecting to the target...OK
Set I/O Voltage reads as 2.60V, TCK Frequency is 8 MHz
Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0xFFFFFFFE, IR Length = 0x06 bits
Total IR length: 0x0006 bits
مع ملاحظ الفرق بين الاثنين فى السطور الحمراء فهيا لا توجود فى اجهاز الذى لايقب الجيتاج
فهل احد يعرف لماذا لا يظهر رقم الايدى وما حل هذه المشكله
ارجوا الافاده وشكرا