[B]ACTION: [COLOR="#FF0000"]Read Password[/COLOR]
SELECTED: SC6531
EXE: NckBox Spreadtrum Module 1.1
Start Detect phone...
Detected: SCI USB2Serial (COM9)
Sending loader, keep boot key untill loader start.
Loader OK: nckTeam(2016) Beta 0.3
CPU: 6531
FlashId: WINBOND: [0x400000]W25Q32FV
Reading Flash Info, wait...
Flash Size: $400000 Sector Size: $8000
IMEI 1: 358XXXXXXXXX428
IMEI 2: 358XXXXXXXXX436
[21D]Password: 1234
[2A2]Password: 1122
[2A1]Password: [COLOR="#FF0000"][U]1978 [/U][/COLOR]Inactive
Total Time: 00:00:03
Done.[/B]
[B]EXE: NckBox Spreadtrum Module 1.1
SELECTED: SC6531E
ACTION: [COLOR="#FF0000"]Read PhonePassword[/COLOR]
Start Detect phone...
Detected: SCI USB2Serial (COM14)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.2
Changing bautrate OK.
Send Second Loader.
Flash ID: [EF4016] WINBOND: [0x400000]W25Q32FV size: 0x400000
SN: 15085567235370
EFS Start: 3B0000 Size: 0x50000
IMEI 1: 359577092467673
IMEI 2: 359577092467681
[4][21C]Password: 1234
[4][2A2]Password: 0000
[4][2A1]Password: [COLOR="#FF0000"]6300[/COLOR]
Total Time: 00:00:02
[COLOR="#FF0000"]Done[/COLOR].[/B]
[B]Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM15)
Boot mode: Preloader
BBCHIP: 321 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737T
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x514536334d42
EMMC FW VERSION: 03:00:00:00:00:00:00:00
EMMC CID: 150100514536334D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM11)
Resetting userdata.
Wait untill phone will start charging.
[0]All done.[/B]
[B]Exe version: NCKBox AndroidMTK 2.7
Selected model: 0-By CPU MT6737T
[auto]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM15)
Boot mode: Preloader
BBCHIP: 321 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737T
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x514536334d42
EMMC FW VERSION: 03:00:00:00:00:00:00:00
EMMC CID: 150100514536334D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Checking data, wait...
Writing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
[0]All done.[/B]
[B]EXE: NckBox Spreadtrum Module 1.1
SELECTED: [COLOR="#FF0000"]SC6530[/COLOR]
ACTION: [COLOR="#FF0000"]Restore FullFlash[/COLOR].
Writing: C:\Users\Ahmed-GsM\Desktop\b310e tmam\SPD6530_SPD6500_00800000_MOCOR_W13.09_FP_R5.0.2_Debug_sc6500_samsung_PitonDS_MEA_JP_05132015163622_1__1-1.bin
Reading Partition info...
Detecting Firmware configuration...
Flash Size: $800000 Sector Size: $10000
Nvram Start: $680000 Nvram Size: $C000
UMEM Start: $4A0000 UMEM Size: $750000
EFS Start: $690000 EFS Size: $170000
PROD_INFO: $68C000
Plain Backup Detected.
Start Detect phone...
Detected: SCI USB2Serial (COM9)
Sending loader, keep boot key untill loader start.
Loader OK: nckTeam(2016) Beta 0.3
CPU: 6530
FlashId: WINBOND: [0x800000]W25Q64FW
Start Writing...
Total Time: 00:02:52
[COLOR="#FF0000"]Done[/COLOR].[/B]
[B]Action : Boot Info.
Selected 0-By CPU:ELBRUS
Exe version: NCKBox AndroidMTK 2.7
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM8)
Boot mode: Preloader
BBCHIP: 335 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x523832314d42
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 150100523832314D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM11)
Build ID: NRD90M
Version: 7.0
Build Date: Thu May 17 11:46:44 CST 2018
Model: X60L
Brand: DOOGEE
Manufacturer: DG
Display ID: DOOGEE-X60L-android7.0-20180116
Device: t596_dg_d5506_x60l_n_37m35_new
FRP partition: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/frp
Mediatek Version Release: alps-mp-n0.mp1-V1.0.2_wtk6737m.35.n
This phone have FRP partition.
IMEI[1]: 356XXXXXXXX971
IMEI[2]: 356XXXXXXXX989
Wait untill phone will start charging.
[0]All done.[/B]
[B]Action: Reset To Factory.
Selected 0-By CPU:ELBRUS
Exe version: NCKBox AndroidMTK 2.7
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM8)
Boot mode: Preloader
BBCHIP: 335 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x523832314d42
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 150100523832314D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM11)
Resetting userdata.
Wait untill phone will start charging.
[0]All done.[/B]
[B]Exe version: NCKBox AndroidMTK 2.7
Selected model: 0-By CPU ELBRUS
[auto]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM8)
Boot mode: Preloader
BBCHIP: 335 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x523832314d42
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 150100523832314D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Checking data, wait...
Writing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
[0]All done.[/B]
[B]Action : Boot Info.
Selected 0-By CPU:ELBRUS
Exe version: NCKBox AndroidMTK 2.7
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM30)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x463732324d42
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 150100463732324D42 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM29)
Build ID: MRA58K
Display ID: Marshmallow
Version: 6.0
Build Date: Wed Dec 21 17:44:34 CST 2016
Model: 5010U
Brand: TCL
Brand: Orange
Device: Pixi4-5
Manufacturer: TCL
Region: GB
Mediatek Version Release: alps-mp-m0.mp1-V2.34_jhz6580.we.m_P51
FRP partition: /dev/block/platform/mtk-msdc.0/11120000.msdc0/by-name/frp
[COLOR="#FF0000"]This phone have FRP partition[/COLOR].
Phone have OTP partition.
MODEL FROM PROINFO: 5010U-2GALDZ1-1
SECRO FROM PROINFO: L5E2HMM0BS20
OTP IMEI: 358XXXXXXX29
Wait untill phone will start charging.
[0]All done.[/B]
[B]Exe version: NCKBox AndroidMTK 2.7
Selected model: 0-By CPU ELBRUS
[auto]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM30)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x463732324d42
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 150100463732324D42 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Checking data, wait...
Writing FRP, wait...
[COLOR="#FF0000"] FRP Reset Done.[/COLOR]
Wait untill phone will start charging.
[0]All done.
[/B]
[B]Flash files count is :12
Action : Firmware update.
Selected Model: 0-By CPU: ELBRUS
Exe version: NCKBox AndroidMTK 2.8
Scenario: [0]Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM30)
Boot mode: Preloader
BBCHIP: 6572 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6572
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) HYNIX 0x483447316404
EMMC FW VERSION: 05:00:00:00:00:00:00:00
EMMC CID: 90014A483447316404 : 00000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000 [3.652 GB]
High speed disabled by user, continue with this settings.
Backup preloader saved in firmware directory.
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Starting flash.
Wait untill phone will start charging.
[0]All done.[/B]
[B]Exe version: NCKBox AndroidMTK 2.8
Selected model: 0-By CPU ELBRUS
[auto]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM30)
Boot mode: Preloader
Phone detected...Please wait
BBCHIP: 6739 0 ca00
Using Algo 1.
Helio MT6739 phone detected, swithing to helio api
Helio enabled DRAM in First Da: TRUE
Sending loader.....
BBCHIP MT6739
[1]Storage EMMC
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 15010051333153 : 000000000000000000
EMMC UA SIZE: 0x3ab400000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac000000 [14.688 GB]
Modem version: MOLY.LR12A.R2.MP.V26.1
Starting helio frp, not disconnect phone untill done
[HELIO][frp]Format partition, please wait...
[0]FRP Reset Done.
[helio]Wait untill phone will start charging.
[0]All done.[/B]
[B]Exe version: NCKBox AndroidMTK 2.8
Selected model: 0-By CPU ELBRUS
Action: [COLOR="#FF0000"]Reset Pattern[/COLOR]
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM30)
Boot mode: Preloader
BBCHIP: 6582 1 ca01
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6582
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (56Gb+4096Mb) KSI 0x563130303038
EMMC FW VERSION: 06:00:00:00:00:00:00:00
EMMC CID: 700100563130303038 : 00000000000000
EMMC UA SIZE: 0x1c3000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1c3c00000 [7.059 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM29)
[1]locksettings.db erased ok
[1]locksettings.db-wal erased ok
[1]locksettings.db-shm erased ok
[COLOR="#FF0000"] [1]password.key erased ok[/COLOR]
[1]gesture.key erased ok
If phone remain on logo, repower phone again.
If lock remain, perform 2 times reset without power on phone.
Wait untill phone will start charging.
[0]All done.[/B]
F[B]lash files count is :14
Action : Firmware update.
Selected Model: 0-By CPU: ELBRUS
Exe version: NCKBox AndroidMTK 2.8
Scenario: [1]Full Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM30)
Boot mode: Preloader
BBCHIP: 335 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6735M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x385750443352
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 150100385750443352 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM29)
Backup preloader saved in firmware directory.
[EMMC]FORMAT - BEGIN: 0x0000000008C00000 - LEN: 0x0000000002400000
[EMMC]FORMAT - BEGIN: 0x00000000A1000000 - LEN: 0x000000012FF80000
[COLOR="#FF0000"] Starting flash.[/COLOR]
[COLOR="#FF0000"] Send preloader...[/COLOR]
Wait untill phone will start charging.
[0]All done.[/B]