Whats New:
- This is new module, replacing old MTK module
- No more boot related issue or complications
- Easy to use clean and organized interface
- Completely customizable options to use own DA/PL etc.
- More useful functions are on the way
Added Xiaomi and Oppo IMEI Repair
- Both IMEI is supported
- Please unlock bootloader first
- Incase bootloop after BL unlock, just wipe data from recovery
- Tested SoCs:
- MT6765
- MT6761
- MT6771
- MT6779
- Should work on others also except 5G chipsets
Changed Connection Settings for users familiar with old module
- Unticking Disable Auth will also disable options not supported without exploit
- You must use Disable Auth for secured phones
- Crash Preloader will not work on newer device and you must use Testpoint for them
- Preloader mode will not work for secured devices unless you have secure DA
Added Select Preloader Prompt
- If dump preloader failed, it will prompt you to select preloader
- For phones connected with testpoint, preloader need to be selected by user
Improved DA selection and handling
- Now software will try to pickup first supported DA from DA folder
- It has no effect if user has selected custom DA
Updated Mi Relock Fix
- Now devices with dual slot are supported
- Not all firmware are supported, if it does not work, try downgrade
Resized GUI to fit low resolution screens
Added Context Menu in Logs
Changed Installation Folder
- Now you can use old module in parallel with new module
- Once all functions are moved to new module, old module will be eradicated
Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode,
you must select PRELOADER in connection settings, otherwise software will try to
Crash Preloader (may not work on new security devices)
Note : Some features are device/OS specific and may not work on all devices.
THIS IS INITIAL RELEASE OF THIS NEW MODULE. SOMETHING MAY NOT WORK AS EXPECTED. PLEASE REPORT ISSUES WITH DETAILS SO WE CAN MAKE IT BETTER ON NEXT RELEASE.
- This is new module, replacing old MTK module
- No more boot related issue or complications
- Easy to use clean and organized interface
- Completely customizable options to use own DA/PL etc.
- More useful functions are on the way
Added Xiaomi and Oppo IMEI Repair
- Both IMEI is supported
- Please unlock bootloader first
- Incase bootloop after BL unlock, just wipe data from recovery
- Tested SoCs:
- MT6765
- MT6761
- MT6771
- MT6779
- Should work on others also except 5G chipsets
Changed Connection Settings for users familiar with old module
- Unticking Disable Auth will also disable options not supported without exploit
- You must use Disable Auth for secured phones
- Crash Preloader will not work on newer device and you must use Testpoint for them
- Preloader mode will not work for secured devices unless you have secure DA
Added Select Preloader Prompt
- If dump preloader failed, it will prompt you to select preloader
- For phones connected with testpoint, preloader need to be selected by user
Improved DA selection and handling
- Now software will try to pickup first supported DA from DA folder
- It has no effect if user has selected custom DA
Updated Mi Relock Fix
- Now devices with dual slot are supported
- Not all firmware are supported, if it does not work, try downgrade
Resized GUI to fit low resolution screens
Added Context Menu in Logs
Changed Installation Folder
- Now you can use old module in parallel with new module
- Once all functions are moved to new module, old module will be eradicated
Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode,
you must select PRELOADER in connection settings, otherwise software will try to
Crash Preloader (may not work on new security devices)
Note : Some features are device/OS specific and may not work on all devices.
THIS IS INITIAL RELEASE OF THIS NEW MODULE. SOMETHING MAY NOT WORK AS EXPECTED. PLEASE REPORT ISSUES WITH DETAILS SO WE CAN MAKE IT BETTER ON NEXT RELEASE.