العمليات الناجحة على Infinity CM2SPD
- بادئ الموضوع mhamedz
- تاريخ البدء
- إنضم
- 8 فبراير 2018
- المشاركات
- 1,433
- مستوى التفاعل
- 782
- النقاط
- 113
realme c30 frp
السلام عليكم
حذف حساب google لــ realme c30 (rmx 3581 )
أزرار الصوت معًا..
السلام عليكم
حذف حساب google لــ realme c30 (rmx 3581 )
أزرار الصوت معًا..
كود:
[LEFT]
Operation : [COLOR=#0000FF]Identify[/COLOR] [ v2.14 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : [COLOR=#FF0000][B]BOTH VOL[/B][/COLOR] , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : Realme :[COLOR=#A52A2A] C31-RMX3501[/COLOR]EU-Nico-Natv
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!
[COLOR=#00FF00]Boot Done![/COLOR]
Device info :
Product Brand : realme
Product Device : RE5887
Product Model : [COLOR=#0000FF]RMX3581[/COLOR]
Product Name : [COLOR=#0000FF]RMX3581[/COLOR]
Patch Level : RP1A.201005.001
Display ID : RMX3581_11.A.43
Ver. Incmt : 1663347365000
Ver. CodeName : REL
Ver. Release : 11
Sec. Patch : 2022-08-05
Build Time : 16.09.2022
SW OTA Version : RMX3581_11.A.43_0430_20220916235105
Product Info : [COLOR=#0000FF]RMX3581[/COLOR]
Product Board : RMX3581
Board Platform : ums9230
Product Manfct : realme
USERDATA : FILESYSTEM : F2FS
- > INFO : Remove cable from device to switch it off!
Done!
Elapsed: 00:00:26
Operation : [COLOR=#0000FF]Format FS / Reset Settings[/COLOR] [ v2.14 ]
Mode : Reset FRP
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : [COLOR=#FF0000]BOTH VOL[/COLOR] , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : Realme : C31-RMX3501EU-Nico-Natv
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!
[COLOR=#0000FF]Boot Done![/COLOR]
[COLOR=#0000FF]Wipe Ok : FRP[/COLOR]
Reconnect Power/Cable!
Done!
Elapsed: 00:00:15
[/LEFT]الله الموفق.
larouci2
عضو أساسي
Vnus Z85 Prime Write Firmware success
بيانات العملية:
بيانات العملية:
كود:
Phone found! [ 212 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
PMTManager : Load 0x22 records
PMTManager : PMT Update Ok!
Flashing now
[FlashProc] : CODE
Current ID : PRODNV
Current File : prodnv.img
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : ERASE
Current ID : ERASEUBOOT
Current Part : uboot
[FlashProc] : Ok!
[FlashProc] : ERASE
Current ID : FLASH
Current Part : wruntimenv1
[FlashProc] : Ok!
[FlashProc] : ERASE
Current ID : FLASH_WCN
Current Part : wcnruntimenv1
[FlashProc] : Ok!
[FlashProc] : ERASE
Current ID : ERASEMISC
Current Part : misc
[FlashProc] : Ok!
[FlashProc] : BOOTCODE
Current ID : SPLLOADER
Current File : u-boot-spl-16k.bin
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : MODEM_W
Current File : sc7731g_CP0_modem.bin
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : DSP_W
Current File : DSP_DM_Gx.bin
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : MODEM_WCN
Current File : sc8830g_modem_CP2_WCN_14D_W16.21.3_Release.bin
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : BOOTLOGO
Current File : logo_720x1560.bin
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : FASTBOOT_LOGO
Current File : fblogo_480x854.bin
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : BOOT
Current File : boot.img
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : IMAGE
Current ID : SYSTEM
Current File : system.img
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : SYSINFO
Current File : sysinfo.img
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : IMAGE
Current ID : CACHE
Current File : cache.img
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : RECOVERY
Current File : recovery.img
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : IMAGE
Current ID : USERDATA
Current File : userdata.img
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : BOOTCODE
Current ID : UBOOTLOADER
Current File : u-boot.bin
Flashing now ...
[FlashProc] : Ok!
Elapsed: 00:02:43
Reconnect Power/Cable!
- إنضم
- 16 سبتمبر 2012
- المشاركات
- 3,136
- مستوى التفاعل
- 2,975
- النقاط
- 113
Itel P17-P552W-SA360 FRP Reset
كود:
Card found : 00000000 , v0151
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14
Load IDBase v8331 Ok!
Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Reset FRP
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : P17-P552W-SA360
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!
Boot Done!
Wipe Ok : FRP
Reconnect Power/Cable!
Done!
Elapsed: 00:00:37