كود:
Operation : Read FW [ v2.11 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : OPM2.171019.012
Display ID : OPM2.171019.012 release-keys
Ver. Incmt : 1608884217
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2021-01-05
Build Time : 25.12.2020
Product Info : Griffe_T8
Product Model : Griffe T8
Product Brand : Condor
Product Name : Griffe_T8
Product Device : Griffe_T8
Product Manfct : SPA Condor Electronics
Product Board : y400
Board Platform : sp7731e
AndroidVer : 8
VlnrLevel : 0x02
SP7731E__SPA_Condor_Electronics__Griffe_T8__8.1.0__OPM2.171019.012__Griffe_T8
Read : u-boot.bin
Read : sml.bin
Read : tos.bin
Read : vbmeta.img
Read : deltanv_w.bin
Read : pm_sys.bin
Read : modem_w.bin
Read : gdsp_w.bin
Read : nvitem_w.bin
Read : modem_wcn.img
Read : gnssmodem.bin
Read : gnssbdmodem.bin
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Make : persist.img
Read : phase.cfg
Read : boot.img
Read : recovery.img
Read : system.img
ExtSparse : Compression ratio : 80%
Read : vendor.img
ExtSparse : Compression ratio : 49%
Make : userdata.img
Make : cache.img
Read : prodnv.img
ExtSparse : Compression ratio : 58%
Read : u-boot-spl.bin
Waiting for device ...
ADB : Device found!
ADB : Connected!
ADB : Prepare Ok!
Found snow!
Found vodka!
Found snow!
Firmware size : 0x567615F0 ( 1,35 GiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable!
Done!
Elapsed: 00:14:48
كود:
Operation : Read NVM [ v2.11 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!
Boot Done!
NVMng : SecurityInfo
IMEI[1] : 355428101438566
IMEI[2] : 355428101642563
IMEI[3] : 867400020316638
WIFIMAC : FFFFFFFFFFFF
BT_MAC : FFFFFFFFFFFF
SEC : SLS:0, SKS:0, SKV:4
NVMng : Backup Ok , 0x00066B20
NVMng : Saved as : 355428101438566__w_fixnv1.nvm
NVMng : Saved to : C:\InfinityBox\CM2SP2\Backup\355428101438566\
Platform Version: MOCORTM_17C_W18.23.4_P2.02_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W18.23.4_P2.02
HW Version: sc7731e_modem
CMP_Time : 10-22-2018 11:54:43
MODEM TAG : MOCORTM_17C_W18.23.4_P2.02_Debug_FM_BASE_17C_W18.23.4_P2.02_sc7731e_modem_pike2_pub
Reconnect Power/Cable!
Done!
Elapsed: 00:00:58
https://mega.nz/file/xQJ3FIjJ#Etzfivqg7bJJ8DO_jXnf3mL5cEPIByZvTO8tUtyW6H8
https://mega.nz/file/FIgUULJa#_SZ6dH74Sqk7NGSf2Hgn5nTxlTQpJqh4IW4oNP6oStI
المرفقات
التعديل الأخير: