السلام عليكم
Core
Changed : Protocol updated ( Raphael/Legacy )
BugFix : MT6737M/MT6580
معالجة الاشكال مع المعالجات اعلاها
Changed : Internal EMI engine rebuild
!* LEGACY line : DB rebuild and updated, changed and optimized selection featur
تحديثات على قاعدة البيانات للاجهزة القديمه
!* RAPAHEL line : DB rebuild from scratch. Selection feature rebuild. Manual mode removed and changed to automatic.
Summary :
الاجهزة الحديثه تم اعادة بناء قاعدة البيانات وازالة التحديد اليدوي ليصبخ الي
!* Supported almost all existing memory/dram combinations up to current date for LEGACY lines
!* Supported almost all existing memory/dram combinations up to current date for RAPHAEL lines ( up to DIMENSITY line )
!* REMOVED manual EMI selection by bruteforce. NOT NEED ANYMORE set one-by-one internal EMI db counter and boot device every time. All auto.
!* In rare case of discrette DRAM may require change EMI once for some specific devices
!* After device learning ( via HW report feature ) it will be stored in SW Database and used automatic at every service/flash/repair operation
ان تعرفت الواجهة على معلومات الجهاز يتم خزن المعلومات في قاعدة البيانات ويتم استخدامهها اليا عند كل عمليه تفليش تصليح او صيانه
!* Overall : Not need seek compatible preloader files for new/not existing FW's devices, spend time to bruteforce and etc. Just connect and work!
لاحاجة للبحث عن ملفات بريلودر للاجهزة التي لا تمتلك الفلاشه الخاصه بها او الجهاز جديد فقط وصل الجهاز
Flasher
التفليش
Changed : Core updated for LEGACY line
تحديثات على الاجهزة القديمه
BugFix : MT6737 with Android 10 flashing revised
معالجة الاشكال في تفليش المعالج اعلاه بنظام 10
BugFix : Checksum verify rebuild
BugFix : Changed memory repartition model for modern scatter formats ( used in Android 10 FWs )
BugFix : Different scatter-version dependencies handled now correct
Changed : Core updated for RAPHAEL line
Changed : UltraFlash feature updated, new security workarounds supported
دعم الحمايات الجديدة للتفليش نوع ultra
Service
العمليات
Changed : Identify
تغييرات على اليه كشف الهواتف
!* Legacy platform changes, mostly for Android 10 devices
تغييرات للواجهات القديمه للتعامل مع الاجهزة بنظام 10
Changed : Smart Reset
!* Optimized support for different customized and generic cases
NewFeature : HW Report ( RAPHAEL - only )
!* Allow read extended info from device about its HW
قراءة معلومات مفصله عن اجزاء الهاتف
- EXTCSD info ( complete, include eMMC version, all flags etc. ) - used in case of identification for HWrepair purposes
- CSD info ( complete, TEMP/PERM write protection status ) - used in case of identification ReadOnly state in some cases
- CID info ( FlashIC base info, name, vendor ) - default info, even if boot can nott be completed by some HW or SW reasons
- LifeInfo ( SLC, MLC, EOL status and use counters ) - allow understand how bad it feels
- RPMB info ( is it key programmed or clean and can be re-used )
!* Feature also allow automatic select and store for further use BOOTROM connection settings for RAPHAEL devices ( DRAM init )
!* HWreport not require complete boot in case of semi-dead devices. Useful for HWdebug
!* HWreport result may vary in diffirent models and agents, even on same SoC!
Firmware Reader
Changed : LEGACY line support updated ( Android 10 line )
Changed : Support more different types
Changed : FileSystem tools updated. Issues with reading on some systems should be fixed.
Changed : More wide range of scatter versions creation according device specific data
Other
BugFix : Lot of minor changes and fixes
Option : GUI ( File -> GUI ) : allow select other interface mode
!* Default - standard V2 line GUI
!* Wide - best for big screen / big distance to monitor
!* Wide Log - extend log window to screen size. Optimal for most cases
Info
!* Strongly recommend to use ONLY Infinity or Factory firmwares for modern Android 9/10 device to avoid lot of issues
- FOTA issues
- Attestation Key Issues
- Tee Key issues
- Security issues
التنزيل من هنا
كلمة المرور
12345678
http://tmp3.infinity-box.biz/00/pub/software/InfinityBox_install_CM2MT2_v2.16.7z
Core
Changed : Protocol updated ( Raphael/Legacy )
BugFix : MT6737M/MT6580
معالجة الاشكال مع المعالجات اعلاها
Changed : Internal EMI engine rebuild
!* LEGACY line : DB rebuild and updated, changed and optimized selection featur
تحديثات على قاعدة البيانات للاجهزة القديمه
!* RAPAHEL line : DB rebuild from scratch. Selection feature rebuild. Manual mode removed and changed to automatic.
Summary :
الاجهزة الحديثه تم اعادة بناء قاعدة البيانات وازالة التحديد اليدوي ليصبخ الي
!* Supported almost all existing memory/dram combinations up to current date for LEGACY lines
!* Supported almost all existing memory/dram combinations up to current date for RAPHAEL lines ( up to DIMENSITY line )
!* REMOVED manual EMI selection by bruteforce. NOT NEED ANYMORE set one-by-one internal EMI db counter and boot device every time. All auto.
!* In rare case of discrette DRAM may require change EMI once for some specific devices
!* After device learning ( via HW report feature ) it will be stored in SW Database and used automatic at every service/flash/repair operation
ان تعرفت الواجهة على معلومات الجهاز يتم خزن المعلومات في قاعدة البيانات ويتم استخدامهها اليا عند كل عمليه تفليش تصليح او صيانه
!* Overall : Not need seek compatible preloader files for new/not existing FW's devices, spend time to bruteforce and etc. Just connect and work!
لاحاجة للبحث عن ملفات بريلودر للاجهزة التي لا تمتلك الفلاشه الخاصه بها او الجهاز جديد فقط وصل الجهاز
Flasher
التفليش
Changed : Core updated for LEGACY line
تحديثات على الاجهزة القديمه
BugFix : MT6737 with Android 10 flashing revised
معالجة الاشكال في تفليش المعالج اعلاه بنظام 10
BugFix : Checksum verify rebuild
BugFix : Changed memory repartition model for modern scatter formats ( used in Android 10 FWs )
BugFix : Different scatter-version dependencies handled now correct
Changed : Core updated for RAPHAEL line
Changed : UltraFlash feature updated, new security workarounds supported
دعم الحمايات الجديدة للتفليش نوع ultra
Service
العمليات
Changed : Identify
تغييرات على اليه كشف الهواتف
!* Legacy platform changes, mostly for Android 10 devices
تغييرات للواجهات القديمه للتعامل مع الاجهزة بنظام 10
Changed : Smart Reset
!* Optimized support for different customized and generic cases
NewFeature : HW Report ( RAPHAEL - only )
!* Allow read extended info from device about its HW
قراءة معلومات مفصله عن اجزاء الهاتف
- EXTCSD info ( complete, include eMMC version, all flags etc. ) - used in case of identification for HWrepair purposes
- CSD info ( complete, TEMP/PERM write protection status ) - used in case of identification ReadOnly state in some cases
- CID info ( FlashIC base info, name, vendor ) - default info, even if boot can nott be completed by some HW or SW reasons
- LifeInfo ( SLC, MLC, EOL status and use counters ) - allow understand how bad it feels
- RPMB info ( is it key programmed or clean and can be re-used )
!* Feature also allow automatic select and store for further use BOOTROM connection settings for RAPHAEL devices ( DRAM init )
!* HWreport not require complete boot in case of semi-dead devices. Useful for HWdebug
!* HWreport result may vary in diffirent models and agents, even on same SoC!
Firmware Reader
Changed : LEGACY line support updated ( Android 10 line )
Changed : Support more different types
Changed : FileSystem tools updated. Issues with reading on some systems should be fixed.
Changed : More wide range of scatter versions creation according device specific data
Other
BugFix : Lot of minor changes and fixes
Option : GUI ( File -> GUI ) : allow select other interface mode
!* Default - standard V2 line GUI
!* Wide - best for big screen / big distance to monitor
!* Wide Log - extend log window to screen size. Optimal for most cases
Info
!* Strongly recommend to use ONLY Infinity or Factory firmwares for modern Android 9/10 device to avoid lot of issues
- FOTA issues
- Attestation Key Issues
- Tee Key issues
- Security issues
التنزيل من هنا
كلمة المرور
12345678
http://tmp3.infinity-box.biz/00/pub/software/InfinityBox_install_CM2MT2_v2.16.7z