السلام عليكم و رحمة الله تعالى و بركاته
تم بحمد الله تفليش + سحب الفلاشة على العملاق CM2 واجهة SP2 اصدار الفلاشة v10 تاريخ 20181116 و تخطي مشكلة 3595al can't have multiple nv file
شرح تخطي المشكلة
الفلاشة المستخدمة
-----------------------------------------------------------------------------------
سحب الفلاشة
انفو الهاتف
شرح تخطي المشكلة
[video=youtube_share;T_uy4L0nZL0]https://youtu.be/T_uy4L0nZL0[/video]
الفلاشة المستخدمة
-----------------------------------------------------------------------------------
سحب الفلاشة
انفو الهاتف
كود:
[LEFT]Operation : Identify [ v2.05 ]
BootMode : FLASH
Boot : INF : [SIZE=4][COLOR=#0000FF]0_SC9850x_BASE : SC9850_eMMC_1GB_RS[/COLOR][/SIZE]
Boot Done!
Device info :
Patch Level : OPM2.171019.012
Display ID : [SIZE=4][COLOR=#0000FF]SP631_V10.0_20181116[/COLOR][/SIZE]
Ver. Incmt : 44221
Ver. CodeName : REL
Ver. Release : [SIZE=4][COLOR=#0000FF]8.1.0[/COLOR][/SIZE]
Sec. Patch : 2018-11-01
Build Time : 1542336970
Product Model : Griffe T6
Product Brand : [SIZE=4][COLOR=#0000FF]Condor[/COLOR][/SIZE]
Product Name : Griffe_T6
Product Device : [SIZE=4][COLOR=#0000FF]Griffe_T6[/COLOR][/SIZE]
Product Manfct : SPA Condor Electronics
Product Info : sp9850ka_1h10_go
Product Board : sp9850ka_1h10
Board Platform : [SIZE=4][COLOR=#0000FF]sp9850ka[/COLOR][/SIZE]
Platform Version: MOCORTM_18A_RLS2_W18.24.4_P2_Debug
Project Version: sharkl2_pub
BASE Version: FM_BASE_18A_RLS2_W18.24.4_P2
HW Version: sc9850_modem
CMP_Time : 07-02-2018 12:51:09
MODEM TAG : MOCORTM_18A_RLS2_W18.24.4_P2_Debug_FM_BASE_18A_RLS 2_W18.24.4_P2_sc9850_modem_sharkl2_pub
UserData : STATE : PLAIN [EXTFS]
Done!
Elapsed: 00:02:10[/LEFT]
بيانات سحب الفلاشة
كود:
[LEFT]Operation : Read FW [ v2.05 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9850x_BASE : SC9850_eMMC_1GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : OPM2.171019.012
Display ID : SP631_V10.0_20181116
Ver. Incmt : 44221
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-11-01
Build Time : 1542336970
Product Model : Griffe T6
Product Brand : Condor
Product Name : Griffe_T6
Product Device : Griffe_T6
Product Manfct : SPA Condor Electronics
Product Info : sp9850ka_1h10_go
Product Board : sp9850ka_1h10
Board Platform : sp9850ka
AndroidVer : 8
VlnrLevel : 0x02
SP9850KA__SPA_Condor_Electronics__Griffe_T6__8.1.0 __SP631_V10.0_20181116__OPM2.171019.012__sp9850ka_ 1h10_go
Read : u-boot.bin
Read : sml.bin
Read : tos.bin
Read : vbmeta.img
Read : ldsp_l.bin
Read : gdsp_l.bin
Read : modem_l.bin
Read : pm_sys.bin
Read : nvitem_l.bin
Read : modem_wcn.img
Read : phase.cfg
Read : boot.img
Read : recovery.img
Make : persist.img
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : dtbo.img
Read : system.img
ExtSparse : Compression ratio : 96%
Read : vendor.img
ExtSparse : Compression ratio : 51%
Make : userdata.img
Make : cache.img
Read : prodnv.img
ExtSparse : Compression ratio : 100%
Read : u-boot-spl.bin
Waiting for device ...
ADB : Device found!
ADB : Connected!
ADB : Prepare Ok!
Looking for a troubles ...
Collect snow ...
Wash hands
Firmware size : 0x60644004 ( 1.51 GiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable!
Done!
Elapsed: 00:39:23[/LEFT]
بالتوفيق للجميع
التعديل الأخير: