Full Dump MAXWELL Curved TV MAX-JP50-CV-T2

[DZ-Developer]

بسم الله الرحمن الرحيم

Exclusive
MAXWELL Smart TV MAX-JP50-CV-T2 [SRF] Repair BOOT BY DZGSM TEAM

[COLOR=#007acc]Model Settings:[/COLOR]
Interface : [COLOR=#008c00]eMMC[/COLOR]
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto

Connecting to server. Please wait...
[COLOR=#007acc]Connection to server successful[/COLOR]
[COLOR=#007acc]Pin connector is detected!(eMMC: 1b, UFS: PWM 1-4)[/COLOR]

[COLOR=#007acc]Connecting...[/COLOR]
Device : [COLOR=#008c00]Samsung eMMC 8GTF4R[/COLOR]
Page size : [COLOR=#008c00]512 B[/COLOR]
Block size : [COLOR=#008c00]512 B[/COLOR]
Block count : [COLOR=#008c00]15269888[/COLOR]
Size : [COLOR=#008c00]7.28 GB (7456.00 MB)[/COLOR]
---------------------------------------------------------------
[COLOR=#007acc]CID Info[/COLOR]

CID : 150100384754463452063FBF8DBFC5AD
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 8GTF4R
Full name one from : [COLOR=#008c00]KLM8G1GETF-B041[/COLOR]
Product revision : 0.6
Product serial number : (hex) 3FBF8DBF
Manufacturing date : 12/2018
---------------------------------------------------------------
[COLOR=#007acc]CSD Info[/COLOR]

CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
[COLOR=#007acc]EXTCSD Info[/COLOR]

Revision 1.8 (for MMC v5.1)
Erase block size : [COLOR=#008c00]512 Kbytes[/COLOR]
Boot1 size : [COLOR=#008c00]4096 Kbytes[/COLOR]
Boot2 size : [COLOR=#008c00]4096 Kbytes[/COLOR]
RPMB size : [COLOR=#008c00]512 Kbytes[/COLOR]

Partition config : [COLOR=#008c00](0x78) 01111000[/COLOR]
Boot partition enable : [COLOR=#008c00]User area[/COLOR]
[COLOR=#007acc](Bus width = 1Bit)[/COLOR]
Boot ACK : [COLOR=#008c00]Boot acknowledge sent during boot operation Bit[/COLOR]

Boot bus conditions : [COLOR=#008c00](0x00) 00000000[/COLOR]
Boot bus width : [COLOR=#008c00]x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)[/COLOR]
Reset boot bus conditions : [COLOR=#008c00]Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)[/COLOR]
Boot mode : [COLOR=#008c00]Use single data rate + backward compatible timings in boot operation (default)[/COLOR]

RST_n function : [COLOR=#008c00](0x00) RST_n signal is temporary disabled (default)[/COLOR]

Partitioning support : [COLOR=#008c00]Device supports partitioning features[/COLOR]
Enhanced attribute : [COLOR=#008c00]Device can have enhanced technological features in partitions and user data area.[/COLOR]
Max enhanced data size: [COLOR=#008c00]3817472 Kbytes[/COLOR]
Partitions attribute : [COLOR=#008c00]0x0[/COLOR]
Part setting completed: [COLOR=#008c00]0x0[/COLOR]
GP partition 1 size : [COLOR=#008c00]0 b[/COLOR]
GP partition 2 size : [COLOR=#008c00]0 b[/COLOR]
GP partition 3 size : [COLOR=#008c00]0 b[/COLOR]
GP partition 4 size : [COLOR=#008c00]0 b[/COLOR]
Enhanced area size : [COLOR=#008c00](0x0) 0 b[/COLOR]
Enhanced area start : [COLOR=#008c00](0x0) 0 b[/COLOR]

Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/8GTF4R_05_11_2022_21_48_16.bin.
[COLOR=#008c00]Connect successful.[/COLOR]
---------------------------------------------------------------
[COLOR=#007acc]SW: 2.2.4.7; FW: 2.00.[/COLOR]
[COLOR=#007acc]RPMB: Counter of the successful data write requests = 0.[/COLOR]

Switched to boot area partition 1.
Opening F:/TV/TP.MT5522S.PC822/MAXWELL Curved TV MAX-JP50-CV-T2/(BOOT1 MAXWELL MAX-JP50-CV-T2) SAMSUNG EMMC 8GTF4R.bin file...
[COLOR=#007acc]Reading. Please wait...[/COLOR]
[COLOR=#008c00]Done.[/COLOR]
Elapsed time 00:00:01
[COLOR=#007acc]SW: 2.2.4.7; FW: 2.00.[/COLOR]

Switched to boot area partition 2.
Opening F:/TV/TP.MT5522S.PC822/MAXWELL Curved TV MAX-JP50-CV-T2/(BOOT2 MAXWELL MAX-JP50-CV-T2) SAMSUNG EMMC 8GTF4R.bin file...
[COLOR=#007acc]Reading. Please wait...[/COLOR]
[COLOR=#008c00]Done.[/COLOR]
Elapsed time 00:00:01
[COLOR=#007acc]SW: 2.2.4.7; FW: 2.00.[/COLOR]

Switched to user area.
Opening F:/TV/TP.MT5522S.PC822/MAXWELL Curved TV MAX-JP50-CV-T2/(FULL MAXWELL MAX-JP50-CV-T2) SAMSUNG EMMC 8GTF4R BY DZGSM TEAM.bin file...
[COLOR=#007acc]Reading. Please wait...[/COLOR]
[COLOR=#008c00]Done.[/COLOR]
Elapsed time 00:42:56
[COLOR=#007acc]SW: 2.2.4.7; FW: 2.00.[/COLOR]
[COLOR=#007acc]EXT_CSD saved to file F:/TV/TP.MT5522S.PC822/MAXWELL Curved TV MAX-JP50-CV-T2/(EXT_CSD MAXWELL MAX-JP50-CV-T2) SAMSUNG EMMC 8GTF4R.bin.[/COLOR]

Switched to boot area partition 1.
Added partition BOOT1 to constructor file.

Switched to boot area partition 2.
Added partition BOOT2 to constructor file.
[COLOR=#008c00]SRF "F:/TV/TP.MT5522S.PC822/MAXWELL Curved TV MAX-JP50-CV-T2/MAXWELL_MAX-JP50-CV-T2_SAMSUNG EMMC 8GTF4R_BY_DZGSM_TEAM.srf" has been installed successfully.
[/COLOR]
[COLOR=#008c00]Reading eMMC firmware. Please wait...[/COLOR]
[COLOR=#007acc]Reading firmware. Please wait... [/COLOR]Elapsed time 00:00:06
[COLOR=#007acc]SW: 2.2.4.7; FW: 2.00.[/COLOR]
Firmware saved in F:/TV/TP.MT5522S.PC822/MAXWELL Curved TV MAX-JP50-CV-T2/KLM8G1GETF-B041 8GTF4R_VCT0_657264617461292C3830304D28636163_8_0_R1_23_02_05.bin file
[COLOR=#008c00]Reading firmware finished[/COLOR]
[COLOR=#ff3300]Disconnected.[/COLOR]

(BOOT1 MAXWELL MAX-JP50-CV-T2) SAMSUNG EMMC 8GTF4R.bin
(BOOT2 MAXWELL MAX-JP50-CV-T2) SAMSUNG EMMC 8GTF4R.bin
(EXT_CSD MAXWELL MAX-JP50-CV-T2) SAMSUNG EMMC 8GTF4R.bin
(FULL MAXWELL MAX-JP50-CV-T2) SAMSUNG EMMC 8GTF4R BY DZGSM TEAM.bin
(LIVE_LOG_MAXWELL MAX-JP50-CV-T2) SAMSUNG EMMC 8GTF4R.txt
MAXWELL_MAX-JP50-CV-T2_SAMSUNG EMMC 8GTF4R_BY_DZGSM_TEAM.srf

SRF File -> Medusa Pro + Octoplus Pro + Medusa Pro II
Connect -> Direct EMMC with ISP Pinout
Motherboard -> TP.MT5522S.PC822

https://support.dzgsm.com/2657-maxwell-smart-tv-max-jp50-cv-t2-srf-repair-boot-by-dzgsm-team/