السلام عليكم
والجهاز مطفئ
وصله بالحاسوب
والجهاز مطفئ
وصله بالحاسوب
كود:
gui: Default
كود:
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.36[/FONT]
[FONT=Verdana]Load IDBase v723487 Ok[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Update configuration...[/FONT]
[FONT=Verdana]Configuration [12060] updated[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Load IDBase v723487 Ok[/FONT]
[FONT=Verdana]Operation : Identify Device [ v2.36 ][/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X[/FONT]
[FONT=Verdana]Mode: FLASH[/FONT]
[FONT=Verdana][+] SecureData Backup[/FONT]
[FONT=Verdana][+] AutoBoot[/FONT]
[FONT=Verdana][+] Read Deep Info: PRL, HW, DEBUG[/FONT]
[FONT=Verdana][+] FireFly : AutoEMI[/FONT]
[FONT=Verdana][+] FireFly : FireFly UNI-Proto[/FONT]
[FONT=Verdana][+] Smart Service[/FONT]
[FONT=Verdana][-] Local SLA[/FONT]
[FONT=Verdana]Wait...[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]1. Power Off the device[/FONT]
[FONT=Verdana]2. Wait 20 seconds[/FONT]
[FONT=Verdana]3. Connect USB cable to device[/FONT]
[FONT=Verdana]Waiting for device connection...[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]PTFN: MediaTek PreLoader USB VCOM (Android) (COM42)[/FONT]
[FONT=Verdana]MODE: PRELOADER PORT[/FONT]
[FONT=Verdana]PORT: 42[/FONT]
[FONT=Verdana]Waiting BOOT ack...[/FONT]
[FONT=Verdana]PRELOADER : ACK confirmed[/FONT]
[FONT=Verdana]BROM: Init BROM[/FONT]
[FONT=Verdana]BROM init passed[/FONT]
[FONT=Verdana] CHIP: MT6757 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0551[/FONT]
[FONT=Verdana] CODE: Kibo[/FONT]
[FONT=Verdana] TYPE: MODERN [RAPHAEL][/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]BROM: SecLevel : 0x00000001[/FONT]
[FONT=Verdana]BROM: SecMode : SBC[/FONT]
[FONT=Verdana]BROM: BROM|BL : 0xFF|0x02[/FONT]
[FONT=Verdana]BROM: PRELOADER PORT[/FONT]
[FONT=Verdana]AGENT : 0_base : BASE_v2112 | Manual : Disabled[/FONT]
[FONT=Verdana]AGENT : Looking for suitable BootChain in DA...[/FONT]
[FONT=Verdana]AGENT : [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_AllInOne_DA.bin[/FONT]
[FONT=Verdana]AGENT : Found MT6757[/FONT]
[FONT=Verdana]AGENT : MTK_DOWNLOAD_AGENT[/FONT]
[FONT=Verdana] BROM : Sending 1st DA...[/FONT]
[FONT=Verdana] BROM : Reset Interface[/FONT]
[FONT=Verdana]PTFN: MediaTek USB Port (COM45)[/FONT]
[FONT=Verdana]MODE: BOOTROM[/FONT]
[FONT=Verdana]PORT: 45[/FONT]
[FONT=Verdana]Waiting BOOT ack...[/FONT]
[FONT=Verdana]BROM: Skip ACK verify[/FONT]
[FONT=Verdana]BROM: Init BROM[/FONT]
[FONT=Verdana]BROM init passed[/FONT]
[FONT=Verdana] CHIP: MT6757 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0551[/FONT]
[FONT=Verdana] CODE: Kibo[/FONT]
[FONT=Verdana] TYPE: MODERN [RAPHAEL][/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]BROM: MEID : 8B84578D6DBC1E0C44AD8520A2BB201B[/FONT]
[FONT=Verdana]BROM: SecLevel : 0x000000E1[/FONT]
[FONT=Verdana]BROM: SecMode : SBC+EXT[/FONT]
[FONT=Verdana]BROM: BROM|BL : 0x05|0xFE[/FONT]
[FONT=Verdana]BROM: BOOTROM[/FONT]
[FONT=Verdana]BROM: EMI : Search[/FONT]
[FONT=Verdana]BROM: EMI : Found[/FONT]
[FONT=Verdana]AGENT : 0_base : BASE_v2112 | Manual : Disabled[/FONT]
[FONT=Verdana]AGENT : Looking for suitable BootChain in DA...[/FONT]
[FONT=Verdana]AGENT : [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_AllInOne_DA.bin[/FONT]
[FONT=Verdana]AGENT : Found MT6757[/FONT]
[FONT=Verdana]AGENT : MTK_DOWNLOAD_AGENT[/FONT]
[FONT=Verdana] BROM : Sending 1st DA...[/FONT]
[FONT=Verdana]BROM: DA sent[/FONT]
[FONT=Verdana]BROM: Transfer control to DA... [/FONT]
[FONT=Verdana] DA : AGENT started[/FONT]
[FONT=Verdana]DA : SYNC[/FONT]
[FONT=Verdana] DA : MODE : BROM[/FONT]
[FONT=Verdana]DA : EXT_RAM NOT initialized[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana] EMI: FireFly preloader_sm6757c_64.bin with 5 memory type(s) supported[/FONT]
[FONT=Verdana] EMI : Init EMI from INTERNAL DB[/FONT]
[FONT=Verdana] EMI : EXT_RAM CFG Passed[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]DA : BOOT to 2nd DA...[/FONT]
[FONT=Verdana]DA : 2ND stage confirmed[/FONT]
[FONT=Verdana]DA : SYNC with DA passed[/FONT]
[FONT=Verdana]DA : Receiving HW info[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana] SRAM: 0x0003A000 [ 232.00 KB ][/FONT]
[FONT=Verdana] DRAM: 0xC0000000 [ 3.00 GB ][/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana] EMMC: CID: 8F010055593543533010E01A356A8635[/FONT]
[FONT=Verdana] EMMC: VEN: Unknown 0x008F : OEM: 0 : ID: 555935435330 : PRV: 0x10[/FONT]
[FONT=Verdana] EMMC: VEN: Unknown 0x008F : UY5CS0[/FONT]
[FONT=Verdana] EMMC: SNN: 3759813994 ( 0xE01A356A ) MF: 8/2019[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana] EMMC: [/FONT]
[FONT=Verdana] BOOT1 : 0x00400000 [ 4.00 MB ][/FONT]
[FONT=Verdana] BOOT2 : 0x00400000 [ 4.00 MB ][/FONT]
[FONT=Verdana] RPMB : 0x00400000 [ 4.00 MB ][/FONT]
[FONT=Verdana] USER : 0x750000000 [ 29.25 GB ][/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana] CHIP: MT6757 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0551[/FONT]
[FONT=Verdana] CODE: Kibo[/FONT]
[FONT=Verdana] TYPE: MODERN [RAPHAEL][/FONT]
[FONT=Verdana] RNID: E123AFF0C99F0237AD5C89A8347A755D[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]DA: USB : FULL-SPEED[/FONT]
[FONT=Verdana]DA: USB : Change Port Speed[/FONT]
[FONT=Verdana]PTFN: MediaTek DA USB VCOM (Android) (COM43)[/FONT]
[FONT=Verdana]MODE: PRELOADER PORT[/FONT]
[FONT=Verdana]PORT: 43[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Boot done[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Verify device config...[/FONT]
[FONT=Verdana]Ok[/FONT]
[FONT=Verdana]No loaders to verify[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]STORAGE : Life Status : eMMC : OK![/FONT]
[FONT=Verdana]STORAGE : OTP Status : NOT Enabled![/FONT]
[FONT=Verdana]STORAGE : RPMB Status : eMMC : RPMB KEY PROGRAMMED [UNUSABLE][/FONT]
[FONT=Verdana]Scan preloader...[/FONT]
[FONT=Verdana]Preloader:[/FONT]
[FONT=Verdana] EMI: MT6757 preloader_sm6757c_64.bin with 5 memory type(s) supported[/FONT]
[FONT=Verdana] EMI[00] : DRAM : DDR3 : ID: NOT_DEFINED : Ven: Unknown 0x0000 | Dev: : RAM: [ 0 B ][/FONT]
[FONT=Verdana] EMI[01] : eMMC : DDR3 : ID: 150100475836424D42 : Ven: Samsung | Dev: GX6BMB : RAM: [ 3.00 GB ][/FONT]
[FONT=Verdana] EMI[02] : eMMC : DDR3 : ID: 150100474436424D42 : Ven: Samsung | Dev: GD6BMB : RAM: [ 3.00 GB ][/FONT]
[FONT=Verdana] EMI[03] : DRAM : DDR3 : ID: NOT_DEFINED : Ven: Unknown 0x0000 | Dev: : RAM: [ 3.00 GB ][/FONT]
[FONT=Verdana] EMI[04] : DRAM : DDR3 : ID: NOT_DEFINED : Ven: Unknown 0x0000 | Dev: : RAM: [ 2.00 GB ][/FONT]
[FONT=Verdana]Preloader saved to: C:\InfinityBox\CM2MT2\backup\PRELOADER\preloader_sm6757c_64.bin[/FONT]
[FONT=Verdana]Verify backup\PRELOADER\preloader_sm6757c_64.bin [77a5821a]...[/FONT]
[FONT=Verdana]Exist[/FONT]
[FONT=Verdana]Ok[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Done[/FONT]
[FONT=Verdana]Elapsed: 00:00:28[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Operation : Reset Settings/Format FS [ v2.36 ][/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Mode: FRP [ RESET PROTECTION ][/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]1. Power Off the device[/FONT]
[FONT=Verdana]2. Wait 20 seconds[/FONT]
[FONT=Verdana]3. Connect USB cable to device[/FONT]
[FONT=Verdana]Waiting for device connection...[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]PTFN: MediaTek PreLoader USB VCOM (Android) (COM42)[/FONT]
[FONT=Verdana]MODE: PRELOADER PORT[/FONT]
[FONT=Verdana]PORT: 42[/FONT]
[FONT=Verdana]Waiting BOOT ack...[/FONT]
[FONT=Verdana]PRELOADER : ACK confirmed[/FONT]
[FONT=Verdana]BROM: Init BROM[/FONT]
[FONT=Verdana]BROM init passed[/FONT]
[FONT=Verdana] CHIP: MT6757 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0551[/FONT]
[FONT=Verdana] CODE: Kibo[/FONT]
[FONT=Verdana] TYPE: MODERN [RAPHAEL][/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]BROM: SecLevel : 0x00000001[/FONT]
[FONT=Verdana]BROM: SecMode : SBC[/FONT]
[FONT=Verdana]BROM: BROM|BL : 0xFF|0x02[/FONT]
[FONT=Verdana]BROM: PRELOADER PORT[/FONT]
[FONT=Verdana]AGENT : 0_base : BASE_v2112 | Manual : Disabled[/FONT]
[FONT=Verdana]AGENT : Looking for suitable BootChain in DA...[/FONT]
[FONT=Verdana]AGENT : [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_AllInOne_DA.bin[/FONT]
[FONT=Verdana]AGENT : Found MT6757[/FONT]
[FONT=Verdana]AGENT : MTK_DOWNLOAD_AGENT[/FONT]
[FONT=Verdana] BROM : Sending 1st DA...[/FONT]
[FONT=Verdana] BROM : Reset Interface[/FONT]
[FONT=Verdana]PTFN: MediaTek USB Port (COM45)[/FONT]
[FONT=Verdana]MODE: BOOTROM[/FONT]
[FONT=Verdana]PORT: 45[/FONT]
[FONT=Verdana]Waiting BOOT ack...[/FONT]
[FONT=Verdana]BROM: Skip ACK verify[/FONT]
[FONT=Verdana]BROM: Init BROM[/FONT]
[FONT=Verdana]BROM init passed[/FONT]
[FONT=Verdana] CHIP: MT6757 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0551[/FONT]
[FONT=Verdana] CODE: Kibo[/FONT]
[FONT=Verdana] TYPE: MODERN [RAPHAEL][/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]BROM: MEID : 8B84578D6DBC1E0C44AD8520A2BB201B[/FONT]
[FONT=Verdana]BROM: SecLevel : 0x000000E1[/FONT]
[FONT=Verdana]BROM: SecMode : SBC+EXT[/FONT]
[FONT=Verdana]BROM: BROM|BL : 0x05|0xFE[/FONT]
[FONT=Verdana]BROM: BOOTROM[/FONT]
[FONT=Verdana]AGENT : 0_base : BASE_v2112 | Manual : Disabled[/FONT]
[FONT=Verdana]AGENT : Looking for suitable BootChain in DA...[/FONT]
[FONT=Verdana]AGENT : [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_AllInOne_DA.bin[/FONT]
[FONT=Verdana]AGENT : Found MT6757[/FONT]
[FONT=Verdana]AGENT : MTK_DOWNLOAD_AGENT[/FONT]
[FONT=Verdana] BROM : Sending 1st DA...[/FONT]
[FONT=Verdana]BROM: DA sent[/FONT]
[FONT=Verdana]BROM: Transfer control to DA... [/FONT]
[FONT=Verdana] DA : AGENT started[/FONT]
[FONT=Verdana]DA : SYNC[/FONT]
[FONT=Verdana] DA : MODE : BROM[/FONT]
[FONT=Verdana]DA : EXT_RAM NOT initialized[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana] EMI: FireFly preloader_sm6757c_64.bin with 5 memory type(s) supported[/FONT]
[FONT=Verdana] EMI : Init EMI from INTERNAL DB[/FONT]
[FONT=Verdana] EMI : EXT_RAM CFG Passed[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]DA : BOOT to 2nd DA...[/FONT]
[FONT=Verdana]DA : 2ND stage confirmed[/FONT]
[FONT=Verdana]DA : SYNC with DA passed[/FONT]
[FONT=Verdana]DA : Receiving HW info[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana] SRAM: 0x0003A000 [ 232.00 KB ][/FONT]
[FONT=Verdana] DRAM: 0xC0000000 [ 3.00 GB ][/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana] EMMC: CID: 8F010055593543533010E01A356A8635[/FONT]
[FONT=Verdana] EMMC: VEN: Unknown 0x008F : OEM: 0 : ID: 555935435330 : PRV: 0x10[/FONT]
[FONT=Verdana] EMMC: VEN: Unknown 0x008F : UY5CS0[/FONT]
[FONT=Verdana] EMMC: SNN: 3759813994 ( 0xE01A356A ) MF: 8/2019[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana] EMMC: [/FONT]
[FONT=Verdana] BOOT1 : 0x00400000 [ 4.00 MB ][/FONT]
[FONT=Verdana] BOOT2 : 0x00400000 [ 4.00 MB ][/FONT]
[FONT=Verdana] RPMB : 0x00400000 [ 4.00 MB ][/FONT]
[FONT=Verdana] USER : 0x750000000 [ 29.25 GB ][/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana] CHIP: MT6757 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0551[/FONT]
[FONT=Verdana] CODE: Kibo[/FONT]
[FONT=Verdana] TYPE: MODERN [RAPHAEL][/FONT]
[FONT=Verdana] RNID: E123AFF0C99F0237AD5C89A8347A755D[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]DA: USB : FULL-SPEED[/FONT]
[FONT=Verdana]DA: USB : Change Port Speed[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Error: Failed to setup HS_USB port[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Error : Fail to init protocol[/FONT]
[FONT=Verdana]>>> Remove battery and cable. Check cable/connection/drivers and repeat operation![/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Reconnect Power/Cable now[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Operation : Identify Device [ v2.36 ][/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X[/FONT]
[FONT=Verdana]Mode: FLASH[/FONT]
[FONT=Verdana][+] SecureData Backup[/FONT]
[FONT=Verdana][+] AutoBoot[/FONT]
[FONT=Verdana][+] Read Deep Info: PRL, HW, DEBUG[/FONT]
[FONT=Verdana][+] FireFly : AutoEMI[/FONT]
[FONT=Verdana][+] FireFly : FireFly UNI-Proto[/FONT]
[FONT=Verdana][+] Smart Service[/FONT]
[FONT=Verdana][-] Local SLA[/FONT]
[FONT=Verdana]Wait...[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]1. Power Off the device[/FONT]
[FONT=Verdana]2. Wait 20 seconds[/FONT]
[FONT=Verdana]3. Connect USB cable to device[/FONT]
[FONT=Verdana]Waiting for device connection...[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]PTFN: MediaTek DA USB VCOM (Android) (COM43)[/FONT]
[FONT=Verdana]MODE: PRELOADER PORT[/FONT]
[FONT=Verdana]PORT: 43[/FONT]
[FONT=Verdana]Waiting BOOT ack...[/FONT]
[FONT=Verdana]PRELOADER : ACK confirm FAIL[/FONT]
[FONT=Verdana]BROM: Init BROM[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Error : Fail to init protocol[/FONT]
[FONT=Verdana]>>> Remove battery and cable. Check cable/connection/drivers and repeat operation![/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Reconnect Power/Cable now[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Operation : Identify Device [ v2.36 ][/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X[/FONT]
[FONT=Verdana]Mode: FLASH[/FONT]
[FONT=Verdana][+] SecureData Backup[/FONT]
[FONT=Verdana][+] AutoBoot[/FONT]
[FONT=Verdana][+] Read Deep Info: PRL, HW, DEBUG[/FONT]
[FONT=Verdana][+] FireFly : AutoEMI[/FONT]
[FONT=Verdana][+] FireFly : FireFly UNI-Proto[/FONT]
[FONT=Verdana][+] Smart Service[/FONT]
[FONT=Verdana][-] Local SLA[/FONT]
[FONT=Verdana]Wait...[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]1. Power Off the device[/FONT]
[FONT=Verdana]2. Wait 20 seconds[/FONT]
[FONT=Verdana]3. Connect USB cable to device[/FONT]
[FONT=Verdana]Waiting for device connection...[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]PTFN: MediaTek USB Port (COM45)[/FONT]
[FONT=Verdana]MODE: BOOTROM[/FONT]
[FONT=Verdana]PORT: 45[/FONT]
[FONT=Verdana]Waiting BOOT ack...[/FONT]
[FONT=Verdana]BROM: Skip ACK verify[/FONT]
[FONT=Verdana]BROM: Init BROM[/FONT]
[FONT=Verdana]BROM init passed[/FONT]
[FONT=Verdana] CHIP: MT6757 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0551[/FONT]
[FONT=Verdana] CODE: Kibo[/FONT]
[FONT=Verdana] TYPE: MODERN [RAPHAEL][/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]BROM: MEID : 8B84578D6DBC1E0C44AD8520A2BB201B[/FONT]
[FONT=Verdana]BROM: SecLevel : 0x000000E1[/FONT]
[FONT=Verdana]BROM: SecMode : SBC+EXT[/FONT]
[FONT=Verdana]BROM: BROM|BL : 0x05|0xFE[/FONT]
[FONT=Verdana]BROM: BOOTROM[/FONT]
[FONT=Verdana]AGENT : 0_base : BASE_v2112 | Manual : Disabled[/FONT]
[FONT=Verdana]AGENT : Looking for suitable BootChain in DA...[/FONT]
[FONT=Verdana]AGENT : [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_AllInOne_DA.bin[/FONT]
[FONT=Verdana]AGENT : Found MT6757[/FONT]
[FONT=Verdana]AGENT : MTK_DOWNLOAD_AGENT[/FONT]
[FONT=Verdana] BROM : Sending 1st DA...[/FONT]
[FONT=Verdana]BROM: DA sent[/FONT]
[FONT=Verdana]BROM: Transfer control to DA... [/FONT]
[FONT=Verdana] DA : AGENT started[/FONT]
[FONT=Verdana]DA : SYNC[/FONT]
[FONT=Verdana] DA : MODE : BROM[/FONT]
[FONT=Verdana]DA : EXT_RAM NOT initialized[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana] EMI: FireFly preloader_sm6757c_64.bin with 5 memory type(s) supported[/FONT]
[FONT=Verdana] EMI : Init EMI from INTERNAL DB[/FONT]
[FONT=Verdana] EMI : EXT_RAM CFG Passed[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]DA : BOOT to 2nd DA...[/FONT]
[FONT=Verdana]DA : 2ND stage confirmed[/FONT]
[FONT=Verdana]DA : SYNC with DA passed[/FONT]
[FONT=Verdana]DA : Receiving HW info[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana] SRAM: 0x0003A000 [ 232.00 KB ][/FONT]
[FONT=Verdana] DRAM: 0xC0000000 [ 3.00 GB ][/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana] EMMC: CID: 8F010055593543533010E01A356A8635[/FONT]
[FONT=Verdana] EMMC: VEN: Unknown 0x008F : OEM: 0 : ID: 555935435330 : PRV: 0x10[/FONT]
[FONT=Verdana] EMMC: VEN: Unknown 0x008F : UY5CS0[/FONT]
[FONT=Verdana] EMMC: SNN: 3759813994 ( 0xE01A356A ) MF: 8/2019[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana] EMMC: [/FONT]
[FONT=Verdana] BOOT1 : 0x00400000 [ 4.00 MB ][/FONT]
[FONT=Verdana] BOOT2 : 0x00400000 [ 4.00 MB ][/FONT]
[FONT=Verdana] RPMB : 0x00400000 [ 4.00 MB ][/FONT]
[FONT=Verdana] USER : 0x750000000 [ 29.25 GB ][/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana] CHIP: MT6757 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0551[/FONT]
[FONT=Verdana] CODE: Kibo[/FONT]
[FONT=Verdana] TYPE: MODERN [RAPHAEL][/FONT]
[FONT=Verdana] RNID: E123AFF0C99F0237AD5C89A8347A755D[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]DA: USB : FULL-SPEED[/FONT]
[FONT=Verdana]DA: USB : Change Port Speed[/FONT]
[FONT=Verdana]PTFN: MediaTek DA USB VCOM (Android) (COM43)[/FONT]
[FONT=Verdana]MODE: PRELOADER PORT[/FONT]
[FONT=Verdana]PORT: 43[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Boot done[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Verify device config...[/FONT]
[FONT=Verdana]Ok[/FONT]
[FONT=Verdana]No loaders to verify[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]STORAGE : Life Status : eMMC : OK![/FONT]
[FONT=Verdana]STORAGE : OTP Status : NOT Enabled![/FONT]
[FONT=Verdana]STORAGE : RPMB Status : eMMC : RPMB KEY PROGRAMMED [UNUSABLE][/FONT]
[FONT=Verdana]Scan preloader...[/FONT]
[FONT=Verdana]Preloader:[/FONT]
[FONT=Verdana] EMI: MT6757 preloader_sm6757c_64.bin with 5 memory type(s) supported[/FONT]
[FONT=Verdana] EMI[00] : DRAM : DDR3 : ID: NOT_DEFINED : Ven: Unknown 0x0000 | Dev: : RAM: [ 0 B ][/FONT]
[FONT=Verdana] EMI[01] : eMMC : DDR3 : ID: 150100475836424D42 : Ven: Samsung | Dev: GX6BMB : RAM: [ 3.00 GB ][/FONT]
[FONT=Verdana] EMI[02] : eMMC : DDR3 : ID: 150100474436424D42 : Ven: Samsung | Dev: GD6BMB : RAM: [ 3.00 GB ][/FONT]
[FONT=Verdana] EMI[03] : DRAM : DDR3 : ID: NOT_DEFINED : Ven: Unknown 0x0000 | Dev: : RAM: [ 3.00 GB ][/FONT]
[FONT=Verdana] EMI[04] : DRAM : DDR3 : ID: NOT_DEFINED : Ven: Unknown 0x0000 | Dev: : RAM: [ 2.00 GB ][/FONT]
[FONT=Verdana]Preloader exist: C:\InfinityBox\CM2MT2\backup\PRELOADER\preloader_sm6757c_64.bin[/FONT]
[FONT=Verdana]Verify backup\PRELOADER\preloader_sm6757c_64.bin [77a5821a]...[/FONT]
[FONT=Verdana]Exist[/FONT]
[FONT=Verdana]Ok[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Done[/FONT]
[FONT=Verdana]Elapsed: 00:00:51[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Operation : Reset Settings/Format FS [ v2.36 ][/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Mode: FRP [ RESET PROTECTION ][/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]1. Power Off the device[/FONT]
[FONT=Verdana]2. Wait 20 seconds[/FONT]
[FONT=Verdana]3. Connect USB cable to device[/FONT]
[FONT=Verdana]Waiting for device connection...[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]PTFN: MediaTek PreLoader USB VCOM (Android) (COM42)[/FONT]
[FONT=Verdana]MODE: PRELOADER PORT[/FONT]
[FONT=Verdana]PORT: 42[/FONT]
[FONT=Verdana]Waiting BOOT ack...[/FONT]
[FONT=Verdana]PRELOADER : ACK confirmed[/FONT]
[FONT=Verdana]BROM: Init BROM[/FONT]
[FONT=Verdana]BROM init passed[/FONT]
[FONT=Verdana] CHIP: MT6757 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0551[/FONT]
[FONT=Verdana] CODE: Kibo[/FONT]
[FONT=Verdana] TYPE: MODERN [RAPHAEL][/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]BROM: SecLevel : 0x00000001[/FONT]
[FONT=Verdana]BROM: SecMode : SBC[/FONT]
[FONT=Verdana]BROM: BROM|BL : 0xFF|0x02[/FONT]
[FONT=Verdana]BROM: PRELOADER PORT[/FONT]
[FONT=Verdana]AGENT : 0_base : BASE_v2112 | Manual : Disabled[/FONT]
[FONT=Verdana]AGENT : Looking for suitable BootChain in DA...[/FONT]
[FONT=Verdana]AGENT : [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_AllInOne_DA.bin[/FONT]
[FONT=Verdana]AGENT : Found MT6757[/FONT]
[FONT=Verdana]AGENT : MTK_DOWNLOAD_AGENT[/FONT]
[FONT=Verdana] BROM : Sending 1st DA...[/FONT]
[FONT=Verdana] BROM : Reset Interface[/FONT]
[FONT=Verdana]PTFN: MediaTek USB Port (COM45)[/FONT]
[FONT=Verdana]MODE: BOOTROM[/FONT]
[FONT=Verdana]PORT: 45[/FONT]
[FONT=Verdana]Waiting BOOT ack...[/FONT]
[FONT=Verdana]BROM: Skip ACK verify[/FONT]
[FONT=Verdana]BROM: Init BROM[/FONT]
[FONT=Verdana]BROM init passed[/FONT]
[FONT=Verdana] CHIP: MT6757 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0551[/FONT]
[FONT=Verdana] CODE: Kibo[/FONT]
[FONT=Verdana] TYPE: MODERN [RAPHAEL][/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]BROM: MEID : 8B84578D6DBC1E0C44AD8520A2BB201B[/FONT]
[FONT=Verdana]BROM: SecLevel : 0x000000E1[/FONT]
[FONT=Verdana]BROM: SecMode : SBC+EXT[/FONT]
[FONT=Verdana]BROM: BROM|BL : 0x05|0xFE[/FONT]
[FONT=Verdana]BROM: BOOTROM[/FONT]
[FONT=Verdana]AGENT : 0_base : BASE_v2112 | Manual : Disabled[/FONT]
[FONT=Verdana]AGENT : Looking for suitable BootChain in DA...[/FONT]
[FONT=Verdana]AGENT : [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_AllInOne_DA.bin[/FONT]
[FONT=Verdana]AGENT : Found MT6757[/FONT]
[FONT=Verdana]AGENT : MTK_DOWNLOAD_AGENT[/FONT]
[FONT=Verdana] BROM : Sending 1st DA...[/FONT]
[FONT=Verdana]BROM: DA sent[/FONT]
[FONT=Verdana]BROM: Transfer control to DA... [/FONT]
[FONT=Verdana] DA : AGENT started[/FONT]
[FONT=Verdana]DA : SYNC[/FONT]
[FONT=Verdana] DA : MODE : BROM[/FONT]
[FONT=Verdana]DA : EXT_RAM NOT initialized[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana] EMI: FireFly preloader_sm6757c_64.bin with 5 memory type(s) supported[/FONT]
[FONT=Verdana] EMI : Init EMI from INTERNAL DB[/FONT]
[FONT=Verdana] EMI : EXT_RAM CFG Passed[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]DA : BOOT to 2nd DA...[/FONT]
[FONT=Verdana]DA : 2ND stage confirmed[/FONT]
[FONT=Verdana]DA : SYNC with DA passed[/FONT]
[FONT=Verdana]DA : Receiving HW info[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana] SRAM: 0x0003A000 [ 232.00 KB ][/FONT]
[FONT=Verdana] DRAM: 0xC0000000 [ 3.00 GB ][/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana] EMMC: CID: 8F010055593543533010E01A356A8635[/FONT]
[FONT=Verdana] EMMC: VEN: Unknown 0x008F : OEM: 0 : ID: 555935435330 : PRV: 0x10[/FONT]
[FONT=Verdana] EMMC: VEN: Unknown 0x008F : UY5CS0[/FONT]
[FONT=Verdana] EMMC: SNN: 3759813994 ( 0xE01A356A ) MF: 8/2019[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana] EMMC: [/FONT]
[FONT=Verdana] BOOT1 : 0x00400000 [ 4.00 MB ][/FONT]
[FONT=Verdana] BOOT2 : 0x00400000 [ 4.00 MB ][/FONT]
[FONT=Verdana] RPMB : 0x00400000 [ 4.00 MB ][/FONT]
[FONT=Verdana] USER : 0x750000000 [ 29.25 GB ][/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana] CHIP: MT6757 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0551[/FONT]
[FONT=Verdana] CODE: Kibo[/FONT]
[FONT=Verdana] TYPE: MODERN [RAPHAEL][/FONT]
[FONT=Verdana] RNID: E123AFF0C99F0237AD5C89A8347A755D[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]DA: USB : FULL-SPEED[/FONT]
[FONT=Verdana]DA: USB : Change Port Speed[/FONT]
[FONT=Verdana]PTFN: MediaTek DA USB VCOM (Android) (COM43)[/FONT]
[FONT=Verdana]MODE: PRELOADER PORT[/FONT]
[FONT=Verdana]PORT: 43[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Boot done[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Verify device config...[/FONT]
[FONT=Verdana]Ok[/FONT]
[FONT=Verdana]No loaders to verify[/FONT]
[FONT=Verdana]Format Ok: RESET PROTECTION[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Done[/FONT]
[FONT=Verdana]Elapsed: 00:00:39[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Reconnect Power/Cable now[/FONT]