مساعدة في هاتف cph1803 متوقف على (boot/recovery)

azarosami · 26 سبتمبر 2022

هل من حل باستعمال بوكي ميدوسا وهذه هعلومات الهاتف بعد تلحيم وربط الاسلاك

كود:

[FONT=Almarai]Model Settings:[/FONT]
[FONT=Almarai]Interface : eMMC[/FONT]
[FONT=Almarai]Voltage : 2.8V[/FONT]
[FONT=Almarai]Bus Mode : 1 bit[/FONT]
[FONT=Almarai]Bus speed : Auto[/FONT]

[FONT=Almarai]Connecting...[/FONT]
[FONT=Almarai]Device : Hynix eMMC HAG4a2[/FONT]
[FONT=Almarai]Page size : 512 B[/FONT]
[FONT=Almarai]Block size : 512 B[/FONT]
[FONT=Almarai]Block count : 30777344[/FONT]
[FONT=Almarai]Size : 14.68 GB (15028.00 MB)[/FONT]
[FONT=Almarai]---------------------------------------------------------------[/FONT]
[FONT=Almarai]CID Info[/FONT]

[FONT=Almarai]CID : 90014A484147346132A5C0C9EEE91647[/FONT]
[FONT=Almarai]Manufacturer ID : 0X90[/FONT]
[FONT=Almarai]Device/BGA : BGA (Discrete embedded)[/FONT]
[FONT=Almarai]OEM/Application ID : 0X4A[/FONT]
[FONT=Almarai]Product name : HAG4a2[/FONT]
[FONT=Almarai]Product revision : 10.5[/FONT]
[FONT=Almarai]Product serial number : (hex) C0C9EEE9[/FONT]
[FONT=Almarai]Manufacturing date : 01/2019[/FONT]
[FONT=Almarai]---------------------------------------------------------------[/FONT]
[FONT=Almarai]CSD Info[/FONT]

[FONT=Almarai]CSD : D02701328F5903FFFFFFFFE78A400017[/FONT]
[FONT=Almarai]CSD structure : CSD version No. 1.2[/FONT]
[FONT=Almarai]SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,[/FONT]
[FONT=Almarai]4.51, 5.0, 5.01, 5.1[/FONT]
[FONT=Almarai]Data read access time1: 15 ms[/FONT]
[FONT=Almarai]TRAN speed : 26 MHz[/FONT]
[FONT=Almarai]READ block length : 512 Bytes[/FONT]
[FONT=Almarai]WP group enable : YES[/FONT]
[FONT=Almarai]PERM_WRITE_PROTECT : NO[/FONT]
[FONT=Almarai]TMP_WRITE_PROTECT : NO[/FONT]
[FONT=Almarai]---------------------------------------------------------------[/FONT]
[FONT=Almarai]EXTCSD Info[/FONT]

[FONT=Almarai]Revision 1.8 (for MMC v5.1)[/FONT]
[FONT=Almarai]Erase block size : 512 Kbytes[/FONT]
[FONT=Almarai]Boot1 size : 4096 Kbytes[/FONT]
[FONT=Almarai]Boot2 size : 4096 Kbytes[/FONT]
[FONT=Almarai]RPMB size : 4096 Kbytes[/FONT]

[FONT=Almarai]Partition config : (0x38) 00111000[/FONT]
[FONT=Almarai]Boot partition enable : User area[/FONT]
[FONT=Almarai](Bus width = 1Bit)[/FONT]
[FONT=Almarai]Boot ACK : No boot acknowledge sent (default)[/FONT]

[FONT=Almarai]Boot bus conditions : (0x00) 00000000[/FONT]
[FONT=Almarai]Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)[/FONT]
[FONT=Almarai]Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)[/FONT]
[FONT=Almarai]Boot mode : Use single data rate + backward compatible timings in boot operation (default)[/FONT]

[FONT=Almarai]RST_n function : (0x01) RST_n signal is permanently enabled[/FONT]

[FONT=Almarai]Partitioning support : Device supports partitioning features[/FONT]
[FONT=Almarai]Enhanced attribute : Device can have enhanced technological features in partitions and user data area.[/FONT]
[FONT=Almarai]Max enhanced data size: 7692288 Kbytes[/FONT]
[FONT=Almarai]Partitions attribute : 0x0[/FONT]
[FONT=Almarai]Part setting completed: 0x0[/FONT]
[FONT=Almarai]GP partition 1 size : 0 b[/FONT]
[FONT=Almarai]GP partition 2 size : 0 b[/FONT]
[FONT=Almarai]GP partition 3 size : 0 b[/FONT]
[FONT=Almarai]GP partition 4 size : 0 b[/FONT]
[FONT=Almarai]Enhanced area size : (0x0) 0 b[/FONT]
[FONT=Almarai]Enhanced area start : (0x0) 0 b[/FONT]

[FONT=Almarai]Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/HAG4a2_26_09_2022_14_19_36.bin.[/FONT]
[FONT=Almarai]Connect successful.[/FONT]
[FONT=Almarai]---------------------------------------------------------------[/FONT]
[FONT=Almarai]SW: 2.2.4.7; FW: 1.24.[/FONT]
[FONT=Almarai]P00: GPT (00000000, 00000028)    20 KB[/FONT]
[FONT=Almarai]P01: oppodycnvbk (00000028, 00005000)    10 MB[/FONT]
[FONT=Almarai]P02: oppostanvbk (00005028, 00005000)    10 MB[/FONT]
[FONT=Almarai]P03: modemst1 (0000A028, 00000C00)    1536 KB[/FONT]
[FONT=Almarai]P04: modemst2 (0000AC28, 00000C00)    1536 KB[/FONT]
[FONT=Almarai]P05: persist (0000B828, 00010000)    32 MB[/FONT]
[FONT=Almarai]P06: opporeserve1 (0001B828, 00004000)    8 MB[/FONT]
[FONT=Almarai]P07: opporeserve2 (0001F828, 00020000)    64 MB[/FONT]
[FONT=Almarai]P08: reserve_exp1 (0003F828, 00001000)    2048 KB[/FONT]
[FONT=Almarai]P09: reserve_exp2 (00040828, 00001000)    2048 KB[/FONT]
[FONT=Almarai]P10: fsc (00041828, 00000002)    1024 b[/FONT]
[FONT=Almarai]P11: ssd (00041830, 00000010)    8 KB[/FONT]
[FONT=Almarai]P12: sbl1 (00041840, 00000400)    512 KB[/FONT]
[FONT=Almarai]P13: rpm (00041C40, 00000400)    512 KB[/FONT]
[FONT=Almarai]P14: tz (00042040, 00001000)    2048 KB[/FONT]
[FONT=Almarai]P15: devcfg (00043040, 00000200)    256 KB[/FONT]
[FONT=Almarai]P16: sbl1bak (00043240, 00000400)    512 KB[/FONT]
[FONT=Almarai]P17: rpmbak (00043640, 00000400)    512 KB[/FONT]
[FONT=Almarai]P18: tzbak (00043A40, 00001000)    2048 KB[/FONT]
[FONT=Almarai]P19: devcfgbak (00044A40, 00000200)    256 KB[/FONT]
[FONT=Almarai]P20: dsp (00044C40, 00008000)    16 MB[/FONT]
[FONT=Almarai]P21: DDR (00050000, 00000040)    32 KB[/FONT]
[FONT=Almarai]P22: fsg (00050040, 00000C00)    1536 KB[/FONT]
[FONT=Almarai]P23: sec (00050C40, 00000020)    16 KB[/FONT]
[FONT=Almarai]P24: aboot (00050C60, 00000800)    1024 KB[/FONT]
[FONT=Almarai]P25: abootbak (00051460, 00000800)    1024 KB[/FONT]
[FONT=Almarai]P26: modem (00051C60, 00040000)    128 MB[/FONT]
[FONT=Almarai]P27: dtbo (00091C60, 00004000)    8 MB[/FONT]
[FONT=Almarai]P28: vbmeta (00095C60, 00000080)    64 KB[/FONT]
[FONT=Almarai]P29: boot (00095CE0, 00020000)    64 MB[/FONT]
[FONT=Almarai]P30: recovery (000B5CE0, 00020000)    64 MB[/FONT]
[FONT=Almarai]P31: devinfo (000D5CE0, 00000800)    1024 KB[/FONT]
[FONT=Almarai]P32: splash (000D8000, 00005800)    11 MB[/FONT]
[FONT=Almarai]P33: LOGO (000DD800, 00010000)    32 MB[/FONT]
[FONT=Almarai]P34: DRIVER (000ED800, 00010000)    32 MB[/FONT]
[FONT=Almarai]P35: cache (000FD800, 00080000)    256 MB[/FONT]
[FONT=Almarai]P36: misc (0017D800, 00000800)    1024 KB[/FONT]
[FONT=Almarai]P37: keystore (0017E000, 00000400)    512 KB[/FONT]
[FONT=Almarai]P38: config (0017E400, 00000040)    32 KB[/FONT]
[FONT=Almarai]P39: oem (0017E440, 00000800)    1024 KB[/FONT]
[FONT=Almarai]P40: limits (00180000, 00000040)    32 KB[/FONT]
[FONT=Almarai]P41: mota (00184000, 00000400)    512 KB[/FONT]
[FONT=Almarai]P42: dip (00184400, 00000800)    1024 KB[/FONT]
[FONT=Almarai]P43: mdtp (00184C00, 00010000)    32 MB[/FONT]
[FONT=Almarai]P44: syscfg (00194C00, 00000400)    512 KB[/FONT]
[FONT=Almarai]P45: mcfg (00195000, 00002000)    4 MB[/FONT]
[FONT=Almarai]P46: lksecapp (00198000, 00000100)    128 KB[/FONT]
[FONT=Almarai]P47: cmnlib (00198100, 00000800)    1024 KB[/FONT]
[FONT=Almarai]P48: cmnlib64 (00198900, 00000800)    1024 KB[/FONT]
[FONT=Almarai]P49: keymaster (00199100, 00000800)    1024 KB[/FONT]
[FONT=Almarai]P50: lksecappbak (00199900, 00000100)    128 KB[/FONT]
[FONT=Almarai]P51: cmnlibbak (00199A00, 00000800)    1024 KB[/FONT]
[FONT=Almarai]P52: cmnlib64bak (0019A200, 00000800)    1024 KB[/FONT]
[FONT=Almarai]P53: keymasterbak (0019AA00, 00000800)    1024 KB[/FONT]
[FONT=Almarai]P54: apdp (0019C000, 00000200)    256 KB[/FONT]
[FONT=Almarai]P55: msadp (0019C200, 00000200)    256 KB[/FONT]
[FONT=Almarai]P56: dpo (0019C400, 00000010)    8 KB[/FONT]
[FONT=Almarai]P57: logdump (0019C410, 00020000)    64 MB[/FONT]
[FONT=Almarai]P58: vm-kystore (001BC410, 00000800)    1024 KB[/FONT]
[FONT=Almarai]P59: vm-data (001BCC10, 00005000)    10 MB[/FONT]
[FONT=Almarai]P60: hyp (001C4000, 00004000)    8 MB[/FONT]
[FONT=Almarai]P61: vm-system (001C8000, 00020000)    64 MB[/FONT]
[FONT=Almarai]P62: vm-linux (001E8000, 00010000)    32 MB[/FONT]
[FONT=Almarai]P63: system (001F8000, 006B4800)    3433 MB[/FONT]
[FONT=Almarai]P64: vendor (008AC800, 0020FB00)    1055 MB[/FONT]
[FONT=Almarai]P65: userdata (00AC0000, 01299FDF)    9.301 GB[/FONT]
[FONT=Almarai]Backuping modemst1 partition...[/FONT]
[FONT=Almarai]Opening C:/Program Files/Medusa Pro Software/Backups/HAG4a2_modemst1_0xa028_0xc00_26_09_2022_14_19_36.bin file...[/FONT]
[FONT=Almarai]Reading. Please wait... Done.[/FONT]
[FONT=Almarai]Elapsed time 00:00:00[/FONT]
[FONT=Almarai]SW: 2.2.4.7; FW: 1.24.[/FONT]
[FONT=Almarai]Backuping modemst2 partition...[/FONT]
[FONT=Almarai]Opening C:/Program Files/Medusa Pro Software/Backups/HAG4a2_modemst2_0xac28_0xc00_26_09_2022_14_19_36.bin file...[/FONT]
[FONT=Almarai]Reading. Please wait... Done.[/FONT]
[FONT=Almarai]Elapsed time 00:00:00[/FONT]
[FONT=Almarai]SW: 2.2.4.7; FW: 1.24.[/FONT]
[FONT=Almarai]Backuping fsg partition...[/FONT]
[FONT=Almarai]Opening C:/Program Files/Medusa Pro Software/Backups/HAG4a2_fsg_0x50040_0xc00_26_09_2022_14_19_36.bin file...[/FONT]
[FONT=Almarai]Reading. Please wait... Done.[/FONT]
[FONT=Almarai]Elapsed time 00:00:00[/FONT]
[FONT=Almarai]SW: 2.2.4.7; FW: 1.24.[/FONT]

[FONT=Almarai]---------------------------------------------------------------[/FONT]
[FONT=Almarai]Searching Android build info...[/FONT]
[FONT=Almarai]Ok[/FONT]

[FONT=Almarai]Disk/Image size : ab400000 bytes[/FONT]
[FONT=Almarai]Device sector size : 512 bytes[/FONT]
[FONT=Almarai]Partition offset : 2064384[/FONT]
[FONT=Almarai]Number of sectors : 7030784[/FONT]
[FONT=Almarai]Device Manufacturer : OPPO[/FONT]
[FONT=Almarai]Build ID : OPM1.171019.026[/FONT]
[FONT=Almarai]Release ID : 8.1.0[/FONT]
[FONT=Almarai]Architecture ABI : arm64-v8a[/FONT]
[FONT=Almarai]Architecture ABI List : arm64-v8a,armeabi-v7a,armeabi[/FONT]
[FONT=Almarai]Build Description : msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20210122.143520 release-keys[/FONT]

[FONT=Almarai]---------------------------------------------------------------[/FONT]

DZ-Developer · 29 سبتمبر 2022

رد: مساعدة في هاتف cph1803 متوقف على (boot/recovery)

هل قمت بتصفير عداد Rpmb ؟ أو إستبدال الذاكرة ؟

azarosami · 29 سبتمبر 2022

رد: مساعدة في هاتف cph1803 متوقف على (boot/recovery)

DZ-Developer قال:
هل قمت بتصفير عداد Rpmb ؟ أو إستبدال الذاكرة ؟

لا لم اقم بأي عملية

DZ-Developer · 29 سبتمبر 2022

رد: مساعدة في هاتف cph1803 متوقف على (boot/recovery)

عداد Rpmb غير موضح في بيانات عملية قراءة الذاكرة ؟ هل هو غير موجود ؟ او لم تقم بنسخه في المشاركة ؟
هل الهاتف جاءك بهذا الخطأ او حصل هذا الخطأ من عملية قمت بها سابقا ؟

.:: Sebti _ Gsm ::. · 29 سبتمبر 2022

رد: مساعدة في هاتف cph1803 متوقف على (boot/recovery)

السلام عليكم

الـ Medusa Pro I لا تظهر العداد Rpmb فقط حصرا على Medusa Pro II

DZ-Developer · 29 سبتمبر 2022

رد: مساعدة في هاتف cph1803 متوقف على (boot/recovery)

لقد قمت بصيانة الهاتف عبر ملف موجود في سيبورت البوكس مسبقا
"OPPO_A3S_CPH1803_EMMC_ISP_BY_PIJUSH_DAS.srf"

كود:

Model Settings:Interface : eMMC
Brand : Oppo
Model : A3s_CPH1803_32GB
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/OPPO_A3S_CPH1803_EMMC_ISP_BY_PIJUSH_DAS.srf
Voltage : 2.2V
Bus Mode : 1 bit
Bus speed : 13 MHz


Connecting...
Device : Hynix eMMC HAG4a2
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info


CID : 90014A484147346132A5C0C9EEE91647
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : HAG4a2
Product revision : 10.5
Product serial number : (hex) C0C9EEE9
Manufacturing date : 01/2019
---------------------------------------------------------------
CSD Info


CSD : D02701328F5903FFFFFFFFE78A400017
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info


Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes


Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)


Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)


RST_n function : (0x01) RST_n signal is permanently enabled


Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7692288 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b


Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/HAG4a2_27_09_2022_14_19_53.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.4.7; FW: 1.24.
P00: GPT (00000000, 00000028) 20 KB
P01: oppodycnvbk (00000028, 00005000) 10 MB
P02: oppostanvbk (00005028, 00005000) 10 MB
P03: modemst1 (0000A028, 00000C00) 1536 KB
P04: modemst2 (0000AC28, 00000C00) 1536 KB
P05: persist (0000B828, 00010000) 32 MB
P06: opporeserve1 (0001B828, 00004000) 8 MB
P07: opporeserve2 (0001F828, 00020000) 64 MB
P08: reserve_exp1 (0003F828, 00001000) 2048 KB
P09: reserve_exp2 (00040828, 00001000) 2048 KB
P10: fsc (00041828, 00000002) 1024 b
P11: ssd (00041830, 00000010) 8 KB
P12: sbl1 (00041840, 00000400) 512 KB
P13: rpm (00041C40, 00000400) 512 KB
P14: tz (00042040, 00001000) 2048 KB
P15: devcfg (00043040, 00000200) 256 KB
P16: sbl1bak (00043240, 00000400) 512 KB
P17: rpmbak (00043640, 00000400) 512 KB
P18: tzbak (00043A40, 00001000) 2048 KB
P19: devcfgbak (00044A40, 00000200) 256 KB
P20: dsp (00044C40, 00008000) 16 MB
P21: DDR (00050000, 00000040) 32 KB
P22: fsg (00050040, 00000C00) 1536 KB
P23: sec (00050C40, 00000020) 16 KB
P24: aboot (00050C60, 00000800) 1024 KB
P25: abootbak (00051460, 00000800) 1024 KB
P26: modem (00051C60, 00040000) 128 MB
P27: dtbo (00091C60, 00004000) 8 MB
P28: vbmeta (00095C60, 00000080) 64 KB
P29: boot (00095CE0, 00020000) 64 MB
P30: recovery (000B5CE0, 00020000) 64 MB
P31: devinfo (000D5CE0, 00000800) 1024 KB
P32: splash (000D8000, 00005800) 11 MB
P33: LOGO (000DD800, 00010000) 32 MB
P34: DRIVER (000ED800, 00010000) 32 MB
P35: cache (000FD800, 00080000) 256 MB
P36: misc (0017D800, 00000800) 1024 KB
P37: keystore (0017E000, 00000400) 512 KB
P38: config (0017E400, 00000040) 32 KB
P39: oem (0017E440, 00000800) 1024 KB
P40: limits (00180000, 00000040) 32 KB
P41: mota (00184000, 00000400) 512 KB
P42: dip (00184400, 00000800) 1024 KB
P43: mdtp (00184C00, 00010000) 32 MB
P44: syscfg (00194C00, 00000400) 512 KB
P45: mcfg (00195000, 00002000) 4 MB
P46: lksecapp (00198000, 00000100) 128 KB
P47: cmnlib (00198100, 00000800) 1024 KB
P48: cmnlib64 (00198900, 00000800) 1024 KB
P49: keymaster (00199100, 00000800) 1024 KB
P50: lksecappbak (00199900, 00000100) 128 KB
P51: cmnlibbak (00199A00, 00000800) 1024 KB
P52: cmnlib64bak (0019A200, 00000800) 1024 KB
P53: keymasterbak (0019AA00, 00000800) 1024 KB
P54: apdp (0019C000, 00000200) 256 KB
P55: msadp (0019C200, 00000200) 256 KB
P56: dpo (0019C400, 00000010) 8 KB
P57: logdump (0019C410, 00020000) 64 MB
P58: vm-kystore (001BC410, 00000800) 1024 KB
P59: vm-data (001BCC10, 00005000) 10 MB
P60: hyp (001C4000, 00004000) 8 MB
P61: vm-system (001C8000, 00020000) 64 MB
P62: vm-linux (001E8000, 00010000) 32 MB
P63: system (001F8000, 006B4800) 3433 MB
P64: vendor (008AC800, 0020FB00) 1055 MB
P65: userdata (00AC0000, 01299FDF) 9.301 GB
Backuping modemst1 partition...
Opening C:/Program Files/Medusa Pro Software/Backups/HAG4a2_modemst1_0xa028_0xc00_27_09_2022_14_19_53.b in file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 2.2.4.7; FW: 1.24.
Backuping modemst2 partition...
Opening C:/Program Files/Medusa Pro Software/Backups/HAG4a2_modemst2_0xac28_0xc00_27_09_2022_14_19_53.b in file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 2.2.4.7; FW: 1.24.
Backuping fsg partition...
Opening C:/Program Files/Medusa Pro Software/Backups/HAG4a2_fsg_0x50040_0xc00_27_09_2022_14_19_53.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 2.2.4.7; FW: 1.24.


---------------------------------------------------------------
Searching Android build info...
Ok


Disk/Image size : ab400000 bytes
Device sector size : 512 bytes
Partition offset : 2064384
Number of sectors : 7030784
Device Manufacturer : OPPO
Build ID : OPM1.171019.026
Release ID : 8.1.0
Architecture ABI : arm64-v8a
Architecture ABI List : arm64-v8a,armeabi-v7a,armeabi
Build Description : msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20210122.143520 release-keys


---------------------------------------------------------------


Selected file: C:/Users/pc/Downloads/Nouveau dossier/rawprogram0.xml


Selected rawprogram XML file: C:/Users/pc/Downloads/Nouveau dossier/rawprogram0.xml.


Switched to user area.
Backuping. Please wait...
Reading partition modemst1... Done.
Reading partition modemst2... Done.
Backuping finished.
Writing. Please wait...
Write data verification is enabled.
Writing partition oppodycnvbk...
Read verification error 1. Possible reasons: flash memory damaged or write protected.
Disconnected.


Please disconnect battery and USB cable.

قم بإستخدام ملف الموضح في الصورة

https://forum.gsmhosting.com/vbb/f664/cph1803-question-answered-3075664/

azarosami · 30 سبتمبر 2022

رد: مساعدة في هاتف cph1803 متوقف على (boot/recovery)

شكرا جزيلا لكم على المساعدة
الزبون إسترجع هاتفه. مع الأسف
وللأسف كذالك لايوجد فيديوهات تعليمية لبوكس الميدوسا بالمقارنة مع إيزي جيتاج أو اليوفي للتعامل مع الذاكرة بشرح مفصل .

DZ-Developer · 30 سبتمبر 2022

رد: مساعدة في هاتف cph1803 متوقف على (boot/recovery)

azarosami قال:
شكرا جزيلا لكم على المساعدة
الزبون إسترجع هاتفه. مع الأسف
وللأسف كذالك لايوجد فيديوهات تعليمية لبوكس الميدوسا بالمقارنة مع إيزي جيتاج أو اليوفي للتعامل مع الذاكرة بشرح مفصل .

مستقبلا إن شاء الله سيتم ادراج ذلك في قناة المنتدى

azarosami · 30 سبتمبر 2022

رد: مساعدة في هاتف cph1803 متوقف على (boot/recovery)

DZ-Developer قال:
مستقبلا إن شاء الله سيتم ادراج ذلك في قناة المنتدى

إن شاء الله وبارك الله فيكم .

مساعدة في هاتف cph1803 متوقف على (boot/recovery)

azarosami

عضو أساسي

DZ-Developer

:: الإدارة R&D ::

azarosami

عضو أساسي

DZ-Developer

:: الإدارة R&D ::

.:: Sebti _ Gsm ::.

:: مراقب قسم بوكسات الجيتاق JTAG ::

DZ-Developer

:: الإدارة R&D ::

azarosami

عضو أساسي

DZ-Developer

:: الإدارة R&D ::

azarosami

عضو أساسي