السلام عليكم و رحمة الله تعالى و بركاته
تحية عطرة للمشرفين ولإدارة المنتدى وأعضائها وزوار المنتدى الكرام
تم بعون الله تغيير ذاكرة eMMC BGA-221 هاتف Samsung G532F الى 16GB باستخدام Medusa Pro
1- من الذاكرة القديمة نسحب الملفات التالية:
.backup restore: NVRAM. EFS. NVDATA. PROTECT1. PROTECT2
2- نحضر ذاكرة سليمة Revision 1.7 رقمها eMMC [KMQ820013M-B419] موجودة في هاتف Condor P6-Pro_PGN-518
Write Firmware 4 files G532FXWU1ASB1 by odin
بالتوفيـــــــق للجميـــــــع
تحية عطرة للمشرفين ولإدارة المنتدى وأعضائها وزوار المنتدى الكرام
تم بعون الله تغيير ذاكرة eMMC BGA-221 هاتف Samsung G532F الى 16GB باستخدام Medusa Pro
1- من الذاكرة القديمة نسحب الملفات التالية:
.backup restore: NVRAM. EFS. NVDATA. PROTECT1. PROTECT2
2- نحضر ذاكرة سليمة Revision 1.7 رقمها eMMC [KMQ820013M-B419] موجودة في هاتف Condor P6-Pro_PGN-518
كود:
[LEFT][B][SIZE=2]---------------------------------------------------------------
backup restore: NVRAM. EFS. NVDATA. PROTECT1. PROTECT2.
---------------------------------------------------------------
[COLOR="#008000"]---------------------------------------------------------------
eMMC Supported:
SAMSUNG - KMQ310013B-B419 - Q313BB -->> 16GB
SAMSUNG - KMQ820013M-B419 - Q823MB -->> 16GB
SAMSUNG - KMR21000BM-B809 - R21BMB -->> 32GB
SKHynix - H9TQ26ADFTMC - HBG4e -->> 32GB
---------------------------------------------------------------[/COLOR]
[COLOR="#FF0000"]eMMC [KMQ820013M-B419]: Condor P6-Pro_PGN-518[/COLOR] [COLOR="#0000FF"]&[/COLOR] [COLOR="#EE82EE"]infinix (x557 - 556 - 572)[/COLOR][COLOR="#000000"]...[/COLOR]
---------------------------------------------------------------
Device : [COLOR="#EE82EE"]Samsung eMMC Q823MB[/COLOR]
Page size : 512 B
Block size : 512 B
Block count : 30535680
Size : [COLOR="#EE82EE"]14.56 GB (14910.00 MB)[/COLOR]
---------------------------------------------------------------
CID Info
CID : 150100513832334D4200964E4E2B237F
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : Q823MB
Full name one from : [COLOR="#FF0000"]KMQ820013M-B419[/COLOR]
Product revision : 0.0
Product serial number : (hex) 964E4E2B
Manufacturing date : 02/2016
[COLOR="#EE82EE"]Revision 1.7 (for MMC v5.0, v5.01)[/COLOR]
---------------------------------------------------------------
[COLOR="#FF0000"]Medusa Pro[/COLOR]
---------------------------------------------------------------
[COLOR="#0000FF"]1- Factory Format will [COLOR="#FF0000"]erase all eMMC data[/COLOR]!
2- Changing CID to[COLOR="#EE82EE"] 150100514E31364242001232C621B32B[/COLOR]
3- Flash geometry successfully changed.
[COLOR="#FF0000"]Boot1, Boot2 size[/COLOR] changed to 4 MB.
RPMB size changed to [COLOR="#FF0000"]4 MB[/COLOR].
4- Writing [COLOR="#FF0000"]EXT_CSD[/COLOR] succesfully complete!
5- RST_n function : (0x01) RST_n signal is permanently [COLOR="#FF0000"]enabled[/COLOR]
6- Repairing from file ":/[COLOR="#FF0000"]Samsung_G532FXWU1ASB1.srf[/COLOR]".
7- restore backup partition: [COLOR="#EE82EE"]NVRAM. EFS. NVDATA. PROTECT1. PROTECT2[/COLOR].
8- Removing [COLOR="#FF0000"]FRP[/COLOR]. Please wait... Done.
9- Resize partition
------------------------------[/COLOR]---------------------------------
[COLOR="#008000"]After Write Firmware 4 files G532FXWU1ASB1 by odin[/COLOR]
---------------------------------------------------------------
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : [COLOR="#0000FF"]Samsung eMMC QN16BB[/COLOR]
Page size : 512 B
Block size : 512 B
Block count : 30535680
Size : [COLOR="#0000FF"]14.56 GB (14910.00 MB)
[/COLOR]---------------------------------------------------------------
CID Info
CID : [COLOR="#0000FF"]150100514E31364242001232C621B32B[/COLOR]
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QN16BB
Full name one from : KMQN10006B-B318
Product revision : 0.0
Product serial number : (hex) 1232C621
Manufacturing date : 11/2016
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF92404009
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
[COLOR="#0000FF"]Revision 1.7 (for MMC v5.0, v5.01)[/COLOR]
Erase block size : 512 Kbytes
Boot1 size : [COLOR="#0000FF"]4096 Kbytes[/COLOR]
Boot2 size : [COLOR="#0000FF"][COLOR="#0000FF"]4096 Kbytes[/COLOR][/COLOR]
RPMB size : 4096 Kbytes
[COLOR="#0000FF"]Partition config : (0x48) 01001000[/COLOR]
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
[COLOR="#0000FF"]RST_n function : (0x01) RST_n signal is permanently enabled[/COLOR]
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 5087232 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/QN16BB_30_06_2022_17_07_10.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.4.3; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: BOTA0 (00002000, 00002000) 4 MB
P02: nvram (00004000, 00004000) 8 MB
P03: lk (00008000, 00001000) 2048 KB
P04: BOTA1 (00009000, 00001000) 2048 KB
P05: secro (0000A000, 00003800) 7 MB
P06: seccfg (0000D800, 00000400) 512 KB
P07: efuse (0000DC00, 00000400) 512 KB
P08: tee1 (0000E000, 00003000) 6 MB
P09: BOTA2 (00011000, 00003000) 6 MB
P10: EFS (00014000, 00004000) 8 MB
P11: nvdata (00018000, 00010000) 32 MB
P12: PARAM (00028000, 00004000) 8 MB
P13: recovery (0002C000, 00008000) 16 MB
P14: boot (00034000, 00008000) 16 MB
P15: md1img (0003C000, 00010000) 32 MB
P16: md1dsp (0004C000, 00002000) 4 MB
P17: keystore (0004E000, 00004000) 8 MB
P18: omekeystore (00052000, 00001C00) 3584 KB
P19: proinfo (00053C00, 00001400) 2560 KB
P20: para (00055000, 00000400) 512 KB
P21: PERSISTENT (00055400, 00000400) 512 KB
P22: STEADY (00055800, 00000800) 1024 KB
P23: protect1 (00056000, 00004000) 8 MB
P24: protect2 (0005A000, 00004000) 8 MB
P25: RESERVE2 (0005E000, 00002000) 4 MB
P26: system (00060000, 00604000) 3080 MB
P27: cache (00664000, 000C8000) 400 MB
P28: hidden (0072C000, 0001E000) 60 MB
[COLOR="#0000FF"]P29: userdata (0074A000, 015D3000) 10.91 GB[/COLOR]
---------------------------------------------------------------
Searching Android build info...
Ok
Disk/Image size : a3e00000 bytes
Device sector size : 512 bytes
Partition offset : 393216
Number of sectors : 6307840
Device Manufacturer : samsung
Device Platform : mt6737t
Build ID : MMB29T
Display Build ID : MMB29T.G532FXWU1ASB1
Release ID : 6.0.1
Device Model : SM-G532F
Device Name : grandpplteser
Architecture ABI : armeabi-v7a
Architecture ABI2 : armeabi
Architecture ABI List : armeabi-v7a,armeabi
Build Description : grandpplteser-user 6.0.1 MMB29T G532FXWU1ASB1 release-keys
---------------------------------------------------------------[/SIZE][/B][/LEFT]Write Firmware 4 files G532FXWU1ASB1 by odin
بالتوفيـــــــق للجميـــــــع
