السلام عليكم
مشاركة بسيطة في تجربة تصليح البوت لجهاز
A217F
مع حذف frp
EMMC G1J9R8_efs
اولا تحمل ملف البوت
من هنا
DZGSM
![](http://[/URL][URL="https://ima.dzgsm.com/"][IMG]https://ima.dzgsm.com/uploads/165493893773463.jpg)
[/IMG]
![165493893764962.jpg](http://[URL="https://ima.dzgsm.com/"][IMG]https://ima.dzgsm.com/uploads/165493893764962.jpg)
[/URL][/IMG]
![165493893727081.jpg](http://[URL="https://ima.dzgsm.com/"][IMG]https://ima.dzgsm.com/uploads/165493893727081.jpg)
[/URL][/IMG]
لوغو العملية
الشرح في الفيديو مع حذف frp
[video=youtube;LQnSzP3dBI4]https://www.youtube.com/watch?v=LQnSzP3dBI4[/video]
تقبلو تحياتي
Salim Gsm
مشاركة بسيطة في تجربة تصليح البوت لجهاز
A217F
مع حذف frp
EMMC G1J9R8_efs
اولا تحمل ملف البوت
من هنا
DZGSM
[/IMG]
لوغو العملية
كود:
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Micron eMMC G1J9R8
Page size : 512 B
Block size : 512 B
Block count : 122142720
Size : 58.24 GB (59640.00 MB)
---------------------------------------------------------------
CID Info
CID : 13014E47314A3952381005FB0B725733
Manufacturer ID : 0X13
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4E
Product name : G1J9R8
Product revision : 1.0
Product serial number : (hex) 5FB0B72
Manufacturing date : 05/2020
---------------------------------------------------------------
CSD Info
CSD : D04F01328F5913FFFFFFFFEF8A400083
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 40 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 16384 Kbytes
Partition config : (0x28) 00101000
Boot partition enable :
(Bus width = 4Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x01) 00000001
Boot bus width : x4 (sdr/ddr) bus width in boot operation mode
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 20348928 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x1
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/G1J9R8_15_05_2022_08_36_25.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.4.4; FW: 1.24.
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-A217F
SRF : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-A217F_EMMC_ISP_BY PIJUSH DAS.srf
Voltage : 2.2V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Micron eMMC G1J9R8
Page size : 512 B
Block size : 512 B
Block count : 122142720
Size : 58.24 GB (59640.00 MB)
---------------------------------------------------------------
CID Info
CID : 13014E47314A3952381005FB0B725733
Manufacturer ID : 0X13
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4E
Product name : G1J9R8
Product revision : 1.0
Product serial number : (hex) 5FB0B72
Manufacturing date : 05/2020
---------------------------------------------------------------
CSD Info
CSD : D04F01328F5913FFFFFFFFEF8A400083
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 40 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 16384 Kbytes
Partition config : (0x28) 00101000
Boot partition enable :
(Bus width = 4Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x01) 00000001
Boot bus width : x4 (sdr/ddr) bus width in boot operation mode
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 20348928 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x1
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/G1J9R8_15_05_2022_08_42_41.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.4.4; FW: 1.24.
Repairing from file "C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-A217F_EMMC_ISP_BY PIJUSH DAS.srf".
Write data verification is enabled.
Switched to boot area partition 1.
Writing BOOT1 partition... Done.
Switched to user area.
Writing GPT partition... Done.
Writing reserved partition... Done.
Writing steady partition... Done.
Writing param partition... Done.
Writing bota partition... Done.
Writing ldfw partition... Done.
Writing tzsw partition... Done.
Writing tzar partition... Done.
Writing keystorage partition... Done.
Writing nad_refer partition... Done.
Writing up_param partition... Done.
Writing misc partition... Done.
Writing uh partition... Done.
Writing uhcfg partition... Done.
Writing blcmd partition... Done.
Writing boot partition... Done.
Writing recovery partition... Done.
Writing dtb partition... Done.
Writing dtbo partition... Done.
Writing radio partition... Done.
Writing persistent partition... Done.
Writing vbmeta partition... Done.
Writing vbmeta_samsung partition... Done.
Writing keyrefuge partition... Done.
Writing keydata partition... Done.
Writing metadata partition... Done.
Writing reserved2 partition... Done.
Writing optics partition... Done.
Writing omr partition... Done.
Writing cp_debug partition... Done.
Writing spu partition... Done.
Smart Repair is successfully complete.
SW: 2.2.4.4; FW: 1.24.
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-A217F
SRF : C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-A217F_EMMC_ISP_BY PIJUSH DAS.srf
Voltage : 2.2V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Micron eMMC G1J9R8
Page size : 512 B
Block size : 512 B
Block count : 122142720
Size : 58.24 GB (59640.00 MB)
---------------------------------------------------------------
CID Info
CID : 13014E47314A3952381005FB0B725733
Manufacturer ID : 0X13
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4E
Product name : G1J9R8
Product revision : 1.0
Product serial number : (hex) 5FB0B72
Manufacturing date : 05/2020
---------------------------------------------------------------
CSD Info
CSD : D04F01328F5913FFFFFFFFEF8A400083
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 40 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 16384 Kbytes
Partition config : (0x28) 00101000
Boot partition enable :
(Bus width = 4Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x01) 00000001
Boot bus width : x4 (sdr/ddr) bus width in boot operation mode
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 20348928 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x1
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/G1J9R8_15_05_2022_08_46_54.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.4.4; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: efs (00002000, 0000A000) 20 MB
P02: sec_efs (0000C000, 0000A000) 20 MB
P03: reserved (00016000, 00002000) 4 MB
P04: cpefs (00018000, 00004000) 8 MB
P05: steady (0001C000, 00002000) 4 MB
P06: param (0001E000, 00004000) 8 MB
P07: bota (00022000, 00012000) 36 MB
P08: ldfw (00034000, 00004000) 8 MB
P09: tzsw (00038000, 00000C00) 1536 KB
P10: tzar (00038C00, 00003400) 6.5 MB
P11: keystorage (0003C000, 00000400) 512 KB
P12: nad_refer (0003C400, 00000800) 1024 KB
P13: up_param (0003CC00, 00004000) 8 MB
P14: misc (00040C00, 00001000) 2048 KB
P15: uh (00041C00, 00001000) 2048 KB
P16: uhcfg (00042C00, 00002000) 4 MB
P17: blcmd (00044C00, 00000400) 512 KB
P18: boot (00045000, 00012000) 36 MB
P19: recovery (00057000, 0001A800) 53 MB
P20: dtb (00071800, 00004000) 8 MB
P21: dtbo (00075800, 00004000) 8 MB
P22: radio (00079800, 00019000) 50 MB
P23: persistent (00092800, 00000400) 512 KB
P24: vbmeta (00092C00, 00000400) 512 KB
P25: vbmeta_samsung (00093000, 00000400) 512 KB
P26: keyrefuge (00093400, 00008000) 16 MB
P27: keydata (0009B400, 00008000) 16 MB
P28: metadata (000A3400, 00010000) 32 MB
P29: reserved2 (000B3400, 00000C00) 1536 KB
P30: super (000B4000, 00A5A000) 5.176 GB
P31: prism (00B0E000, 00190000) 800 MB
P32: optics (00C9E000, 0000A000) 20 MB
P33: cache (00CA8000, 00064000) 200 MB
P34: omr (00D0C000, 0000A000) 20 MB
P35: cp_debug (00D16000, 00002800) 5 MB
P36: spu (00D18800, 00019000) 50 MB
P37: userdata (00D31800, 06748000) 51.64 GB
Backuping efs partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/G1J9R8_efs_0x2000_0xa000_15_05_2022_08_46_54.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:08
SW: 2.2.4.4; FW: 1.24.
Backuping cpefs partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/G1J9R8_cpefs_0x18000_0x4000_15_05_2022_08_46_54.bi n file...
Reading. Please wait... Done.
Elapsed time 00:00:03
SW: 2.2.4.4; FW: 1.24.
---------------------------------------------------------------
Searching Android build info...
Not found
---------------------------------------------------------------
Backuping FRP data...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/FRP_0x92800_0x400_15_05_2022_08_47_32.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.4.4; FW: 1.24.
Removing FRP. Please wait... Done.
Perform a Factory data reset from the phone menu.
SW: 2.2.4.4; FW: 1.24.
Disconnected.[video=youtube;LQnSzP3dBI4]https://www.youtube.com/watch?v=LQnSzP3dBI4[/video]
تقبلو تحياتي
Salim Gsm
