السلام عليكم ورحمة الله وبركاته
اصلاح بوتHUAWEI Y7 Prime 2018
Huawei isp Pinout LDN-L21
بعد الفشل في ادخال اedl pointلهاتف وضع
qualcomm hs-usb qdloader 9008
Added SFR
سيتم رفع ملفات الاصلاح والدامب EMMP ISP POINUT
http://support.dzgsm.com/
اصلاح بوتHUAWEI Y7 Prime 2018
Huawei isp Pinout LDN-L21
بعد الفشل في ادخال اedl pointلهاتف وضع
qualcomm hs-usb qdloader 9008
كود:
Connecting...
Device : Samsung eMMC GD6BMB
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100474436424D4201899CF2A6252B
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : GD6BMB
Full name one from : KMGD6001BM-B421
Product revision : 0.1
Product serial number : (hex) 899CF2A6
Manufacturing date : 02/2018
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/GD6BMB_27_02_2022_23_34_03.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.3.1; FW: 1.24.
P00: GPT (00000000, 00000022) 17 KB
P01: sbl1 (00000022, 00000400) 512 KB
P02: rpm (00000422, 00000400) 512 KB
P03: tz (00000822, 00001000) 2048 KB
P04: devcfg (00001822, 00000200) 256 KB
P05: dsp (00001A22, 00008000) 16 MB
P06: keystore (00009A22, 00000400) 512 KB
P07: frp (00009E22, 00000400) 512 KB
P08: mota (0000A222, 00000400) 512 KB
P09: dip (0000A622, 00000800) 1024 KB
P10: syscfg (0000AE22, 00000400) 512 KB
P11: lksecapp (0000B222, 00000100) 128 KB
P12: apdp (0000B322, 00000200) 256 KB
P13: msadp (0000B522, 00000200) 256 KB
P14: dpo (0000B722, 00000010) 8 KB
P15: fsc (0000B732, 00000002) 1024 b
P16: ssd (0000B734, 00000010) 8 KB
P17: bootfail_info (0000B744, 00001000) 2048 KB
P18: pad0 (0000C744, 000038BC) 7.092 MB
P19: aboot (00010000, 00002000) 4 MB
P20: cmnlib (00012000, 00000800) 1024 KB
P21: cmnlib64 (00012800, 00000800) 1024 KB
P22: keymaster (00013000, 00000800) 1024 KB
P23: pad1 (00013800, 00005400) 10.5 MB
P24: fsg (00018C00, 00002000) 4 MB
P25: DDR (0001AC00, 00000040) 32 KB
P26: sec (0001AC40, 00000020) 16 KB
P27: devinfo (0001AC60, 00000800) 1024 KB
P28: limits (0001B460, 00000040) 32 KB
P29: pad2 (0001B4A0, 00004B60) 9.422 MB
P30: oeminfo (00020000, 00020000) 64 MB
P31: misc (00040000, 00002000) 4 MB
P32: modemst1 (00042000, 00002000) 4 MB
P33: modemst2 (00044000, 00002000) 4 MB
P34: rrecord (00046000, 00004000) 8 MB
P35: nff (0004A000, 00004000) 8 MB
P36: mcfg (0004E000, 00002000) 4 MB
P37: modem (00050000, 00030000) 96 MB
P38: erecovery_kernel (00080000, 0001C000) 56 MB
P39: erecovery_ramdisk (0009C000, 00010000) 32 MB
P40: erecovery_vendor (000AC000, 00008000) 16 MB
P41: kernel (000B4000, 0001C000) 56 MB
P42: ramdisk (000D0000, 00008000) 16 MB
P43: recovery_ramdisk (000D8000, 00010000) 32 MB
P44: recovery_vendor (000E8000, 00008000) 16 MB
P45: cache (000F0000, 00040000) 128 MB
P46: odm (00130000, 00010000) 32 MB
P47: persist (00140000, 00010000) 32 MB
P48: log (00150000, 00020000) 64 MB
P49: patch (00170000, 00010000) 32 MB
P50: version (00180000, 00010000) 32 MB
P51: vendor (00190000, 00130000) 608 MB
P52: product (002C0000, 00060000) 192 MB
P53: cust (00320000, 00060000) 192 MB
P54: system (00380000, 00520000) 2624 MB
P55: userdata (008A0000, 0319DFDF) 24.81 GB
Backuping fsg partition...
Opening C:/Program Files/Medusa Pro Software/Backups/GD6BMB_fsg_0x18c00_0x2000_27_02_2022_23_34_03.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 2.2.3.1; FW: 1.24.
Backuping oeminfo partition...
Opening C:/Program Files/Medusa Pro Software/Backups/GD6BMB_oeminfo_0x20000_0x20000_27_02_2022_23_34_03 .bin file...
Reading. Please wait... Done.
Elapsed time 00:00:26
SW: 2.2.3.1; FW: 1.24.
Backuping modemst1 partition...
Opening C:/Program Files/Medusa Pro Software/Backups/GD6BMB_modemst1_0x42000_0x2000_27_02_2022_23_34_03 .bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 2.2.3.1; FW: 1.24.
Backuping modemst2 partition...
Opening C:/Program Files/Medusa Pro Software/Backups/GD6BMB_modemst2_0x44000_0x2000_27_02_2022_23_34_03 .bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 2.2.3.1; FW: 1.24.
---------------------------------------------------------------
Searching Android build info...
Ok
[COLOR="#FF0000"]Disk/Image size : 47c00000 bytes[/COLOR]
Device sector size : 512 bytes
[COLOR="#800000"]Partition offset : 3670016[/COLOR]
Number of sectors : 5373952 :
[COLOR="#0000FF"]Build ID : OPR6.170623.013[/COLOR]
[COLOR="#FF0000"]Display Build ID : System 8.0.0.071(000W)[/COLOR]
Release ID : 8.0.0
Architecture ABI : arm64-v8a
[COLOR="#0000CD"]Architecture ABI List : arm64-v8a,armeabi-v7a,armeabi
Build Description : generic_a53-user 8.0.0 OPR6.170623.013 eng.root.20180903.213911 test-keys[/COLOR]Added SFR
كود:
Switched to boot area partition 1.
Added partition BOOT1 to constructor file.
Switched to boot area partition 2.
Added partition BOOT2 to constructor file.
Switched to user area.
Added partition GPT to constructor file.
Added partition sbl1 to constructor file.
Added partition rpm to constructor file.
Added partition tz to constructor file.
Added partition devcfg to constructor file.
Added partition dsp to constructor file.
Added partition keystore to constructor file.
Added partition frp to constructor file.
Added partition mota to constructor file.
Added partition dip to constructor file.
Added partition syscfg to constructor file.
Added partition lksecapp to constructor file.
Added partition apdp to constructor file.
Added partition msadp to constructor file.
Added partition dpo to constructor file.
Added partition fsc to constructor file.
Added partition ssd to constructor file.
Added partition bootfail_info to constructor file.
Added partition pad0 to constructor file.
Added partition aboot to constructor file.
Added partition cmnlib to constructor file.
Added partition cmnlib64 to constructor file.
Added partition keymaster to constructor file.
Added partition pad1 to constructor file.
Added partition fsg to constructor file.
Added partition DDR to constructor file.
Added partition sec to constructor file.
Added partition devinfo to constructor file.
Added partition limits to constructor file.
Added partition pad2 to constructor file.
Added partition oeminfo to constructor file.
Added partition misc to constructor file.
Added partition modemst1 to constructor file.
Added partition modemst2 to constructor file.
Added partition rrecord to constructor file.
Added partition nff to constructor file.
Added partition mcfg to constructor file.
Added partition modem to constructor file.
Added partition erecovery_kernel to constructor file.
Added partition erecovery_ramdisk to constructor file.
Added partition erecovery_vendor to constructor file.
Added partition kernel to constructor file.
Added partition ramdisk to constructor file.
Added partition recovery_ramdisk to constructor file.
Added partition recovery_vendor to constructor file.
Added partition cache to constructor file.
Added partition odm to constructor file.
Added partition persist to constructor file.
Added partition log to constructor file.
Added partition patch to constructor file.
Added partition version to constructor file.
Added partition vendor to constructor file.
Added partition product to constructor file.
Added partition cust to constructor file.
Added partition system to constructor file.
SRF "C:/Users/m/Desktop/Huawei_y7 prime2018.srf" has been installed successfully.سيتم رفع ملفات الاصلاح والدامب EMMP ISP POINUT
http://support.dzgsm.com/
