السلام عليكم
معلومات الفاست بوت
Checking fastboot device.....OK
Reading info.....OK
Device Model: MRD-LX1F
Device Firmware: MRD-L21A 9.1.0.268(C431E5)
Base Firmware: :JAT-LGRP2-OVS 9.1.0.291
Custom Firmware: :JAT-L29-CUST 9.0.1.4(C636)
Preload Firmware: :JAT-L29-PRELOAD 9.0.1.1(C636R4)
Device Lock: locked
Hydra MediaTeK Tool Ver 1.0.3 Build 84
Windows 10 (Version 10.0, Build 19042, 64-bit Edition)
Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz
Intel(R) HD Graphics
Ram Installed : 4 GB
Windows Access Right : Admin
Software Run As Admnistrator
******* Dongle Info *******
Version : Hydra Tool v 1.2
Serial : 191100002821
Initialize : OKAY
Status : Activated
Life : 0 [0-0-0-0-0]
=====================================
Searching for MTK Device...Found
Port Identification :Flashmode BROM
FriendlyName :MediaTek USB Port (COM5)
Device :7&2d60df3f&0&4
SymbolicName :\??\USB#VID_0E8D&PID_0003#7&2d60df3f&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver Ver :01/22/2015,3.0.1504.0
Opened handle..
Handshaking...
Identifying Hardware ID.....
Reading Device hardware info..
hw code : 0766MT6765 [6765]
hw subcode : 8A00
hw version : CA00
sw version : 0000
Target config : 00
SBC : 00 (False)
SLA : 00 (False)
DAA : 00 (False)
SWJTAG : 00 (False)
EPP : 00 (False)
CERT : 00 (False)
MEMREAD : 00 (False)
MEMWRITE : 00 (False)
CMD_C8 : 00 (False)
Device not secured..
--- ENABLE AUTO PREL DUMP ----
Found
C:\Hydra Tool\Backup\Preloader_dump\prel.tmp
------------------------------
Handshaking...
Identifying Hardware ID.....
Reading Device hardware info..
hw code : 0766MT6765 [6765]
hw subcode : 8A00
hw version : CA00
sw version : 0000
Target config : 00
SBC : 00 (False)
SLA : 00 (False)
DAA : 00 (False)
SWJTAG : 00 (False)
EPP : 00 (False)
CERT : 00 (False)
MEMREAD : 00 (False)
MEMWRITE : 00 (False)
CMD_C8 : 00 (False)
MEID : EFE146AF671328A1F23C02CADAE1CCFC
Stage 1..[Size:216440]
Sending : Please wait.. Accepted
Identifying Protocol...
Protocol : New
Synchronization...[ERROR]- NOT SYNC
=============================================
Reasons why it fails due to the following"
1. Harware problem/issues
2. If you did Testpoint Kindly check the parts you Touch/TP
3. Powershortage, try to connect Battery
4. Check or replace usb cable and plug directly to your pc usb port.
=============================================
SYNC
Preloader Initialization...
Parsing prel.tmp
Init : Accepted
Executing : SYNC
Reading Device UniqueID, RAM and Flash Chip Info...
UNIQUE ID : BAFA26999BE74A1E47A661C9FA753A10
ERAM Size : 0x0000000000038000 -224 KB
IRAM Size : 0x00000000C0000000 -3 GB
eMMC BOOT1 : 0x0000000000400000 -4 MB
eMMC BOOT2 : 0x0000000000400000 -4 MB
eMMC RPMB : 0x0000000001000000 -16 MB
eMMC USER : 0x0000000E8F800000 -58.242 GB
eMMC CID : 150100475036424D42017B7C9B05363F - GP6BMB
Executing : ACCEPTED...
Reading GPT-EMMC [0x00008000] 130 Items
Autobackup Partitions
-preloader[0x00000000]512 KB ->preloader.bin...Ok
-> Renaming Preloader.... preloader_k62v1_64_mexico.bin
Creating Scatter file... C:\Hydra Tool\\Backup\Auto\0766__021522200645\MT6765_Android_scatter.txt
-pgpt[0x00000000]32 KB ->pgpt.bin...Ok
-frp[0x00108000]1024 KB ->frp.bin...Ok
-nvdata[0x00A08000]16 MB ->nvdata.bin...Ok
-protect1[0x01A08000]8 MB ->protect1.bin...Ok
-protect2[0x02208000]13.969 MB ->protect2.bin...Ok
-persist[0x03800000]8 MB ->persist.bin...Ok
-nvram[0x04400000]5 MB ->nvram.bin...Ok
-oeminfo[0x04900000]32 MB ->oeminfo.bin...Ok
Done!!!
C:\Hydra Tool\\Backup\Auto\0766__021522200645
MTK Phone Loader is NOW RUNNING.
Reading Device UniqueID, RAM and Flash Chip Info...
UNIQUE ID : BAFA26999BE74A1E47A661C9FA753A10
ERAM Size : 0x0000000000038000 -224 KB
IRAM Size : 0x00000000C0000000 -3 GB
eMMC BOOT1 : 0x0000000000400000 -4 MB
eMMC BOOT2 : 0x0000000000400000 -4 MB
eMMC RPMB : 0x0000000001000000 -16 MB
eMMC USER : 0x0000000E8F800000 -58.242 GB
eMMC CID : 150100475036424D42017B7C9B05363F - GP6BMB
Reading GPT-EMMC [0x00008000] 130 Items
-------------------------------------
Operation : Auto
Processing...
ZeroWipe FRP Partition...[FEEEEEEF-]
Erasing FRP Partition...
Action Result : Ok
Elapsed Time : 00:00:44
معلومات الفاست بوت
Checking fastboot device.....OK
Reading info.....OK
Device Model: MRD-LX1F
Device Firmware: MRD-L21A 9.1.0.268(C431E5)
Base Firmware: :JAT-LGRP2-OVS 9.1.0.291
Custom Firmware: :JAT-L29-CUST 9.0.1.4(C636)
Preload Firmware: :JAT-L29-PRELOAD 9.0.1.1(C636R4)
Device Lock: locked
Hydra MediaTeK Tool Ver 1.0.3 Build 84
Windows 10 (Version 10.0, Build 19042, 64-bit Edition)
Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz
Intel(R) HD Graphics
Ram Installed : 4 GB
Windows Access Right : Admin
Software Run As Admnistrator
******* Dongle Info *******
Version : Hydra Tool v 1.2
Serial : 191100002821
Initialize : OKAY
Status : Activated
Life : 0 [0-0-0-0-0]
=====================================
Searching for MTK Device...Found
Port Identification :Flashmode BROM
FriendlyName :MediaTek USB Port (COM5)
Device :7&2d60df3f&0&4
SymbolicName :\??\USB#VID_0E8D&PID_0003#7&2d60df3f&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver Ver :01/22/2015,3.0.1504.0
Opened handle..
Handshaking...
Identifying Hardware ID.....
Reading Device hardware info..
hw code : 0766MT6765 [6765]
hw subcode : 8A00
hw version : CA00
sw version : 0000
Target config : 00
SBC : 00 (False)
SLA : 00 (False)
DAA : 00 (False)
SWJTAG : 00 (False)
EPP : 00 (False)
CERT : 00 (False)
MEMREAD : 00 (False)
MEMWRITE : 00 (False)
CMD_C8 : 00 (False)
Device not secured..
--- ENABLE AUTO PREL DUMP ----
Found
C:\Hydra Tool\Backup\Preloader_dump\prel.tmp
------------------------------
Handshaking...
Identifying Hardware ID.....
Reading Device hardware info..
hw code : 0766MT6765 [6765]
hw subcode : 8A00
hw version : CA00
sw version : 0000
Target config : 00
SBC : 00 (False)
SLA : 00 (False)
DAA : 00 (False)
SWJTAG : 00 (False)
EPP : 00 (False)
CERT : 00 (False)
MEMREAD : 00 (False)
MEMWRITE : 00 (False)
CMD_C8 : 00 (False)
MEID : EFE146AF671328A1F23C02CADAE1CCFC
Stage 1..[Size:216440]
Sending : Please wait.. Accepted
Identifying Protocol...
Protocol : New
Synchronization...[ERROR]- NOT SYNC
=============================================
Reasons why it fails due to the following"
1. Harware problem/issues
2. If you did Testpoint Kindly check the parts you Touch/TP
3. Powershortage, try to connect Battery
4. Check or replace usb cable and plug directly to your pc usb port.
=============================================
SYNC
Preloader Initialization...
Parsing prel.tmp
Init : Accepted
Executing : SYNC
Reading Device UniqueID, RAM and Flash Chip Info...
UNIQUE ID : BAFA26999BE74A1E47A661C9FA753A10
ERAM Size : 0x0000000000038000 -224 KB
IRAM Size : 0x00000000C0000000 -3 GB
eMMC BOOT1 : 0x0000000000400000 -4 MB
eMMC BOOT2 : 0x0000000000400000 -4 MB
eMMC RPMB : 0x0000000001000000 -16 MB
eMMC USER : 0x0000000E8F800000 -58.242 GB
eMMC CID : 150100475036424D42017B7C9B05363F - GP6BMB
Executing : ACCEPTED...
Reading GPT-EMMC [0x00008000] 130 Items
Autobackup Partitions
-preloader[0x00000000]512 KB ->preloader.bin...Ok
-> Renaming Preloader.... preloader_k62v1_64_mexico.bin
Creating Scatter file... C:\Hydra Tool\\Backup\Auto\0766__021522200645\MT6765_Android_scatter.txt
-pgpt[0x00000000]32 KB ->pgpt.bin...Ok
-frp[0x00108000]1024 KB ->frp.bin...Ok
-nvdata[0x00A08000]16 MB ->nvdata.bin...Ok
-protect1[0x01A08000]8 MB ->protect1.bin...Ok
-protect2[0x02208000]13.969 MB ->protect2.bin...Ok
-persist[0x03800000]8 MB ->persist.bin...Ok
-nvram[0x04400000]5 MB ->nvram.bin...Ok
-oeminfo[0x04900000]32 MB ->oeminfo.bin...Ok
Done!!!
C:\Hydra Tool\\Backup\Auto\0766__021522200645
MTK Phone Loader is NOW RUNNING.
Reading Device UniqueID, RAM and Flash Chip Info...
UNIQUE ID : BAFA26999BE74A1E47A661C9FA753A10
ERAM Size : 0x0000000000038000 -224 KB
IRAM Size : 0x00000000C0000000 -3 GB
eMMC BOOT1 : 0x0000000000400000 -4 MB
eMMC BOOT2 : 0x0000000000400000 -4 MB
eMMC RPMB : 0x0000000001000000 -16 MB
eMMC USER : 0x0000000E8F800000 -58.242 GB
eMMC CID : 150100475036424D42017B7C9B05363F - GP6BMB
Reading GPT-EMMC [0x00008000] 130 Items
-------------------------------------
Operation : Auto
Processing...
ZeroWipe FRP Partition...[FEEEEEEF-]
Erasing FRP Partition...
Action Result : Ok
Elapsed Time : 00:00:44