السلام عليكم ورحمة الله وبركاته
تحية عطرة للمشرفين ولإدارة المنتدى وأعضائها وزوار المنتدى الكرام
تم بعون الله تغيير ذاكرة هاتف CONDOR L6 PRO _SP-643
لوغ الفلاش على الذاكرة التالفة [تقلص حجم الذاكرة]
استبدال الـ eMMC
بيانات الذاكرة البديلة على Medusa Pro
بعد تركيب الـ eMMC فلاش على CM2MT2
تحية عطرة للمشرفين ولإدارة المنتدى وأعضائها وزوار المنتدى الكرام
تم بعون الله تغيير ذاكرة هاتف CONDOR L6 PRO _SP-643
لوغ الفلاش على الذاكرة التالفة [تقلص حجم الذاكرة]
كود:
[LEFT][B][SIZE=2]1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port (COM5)
MODE : BOOTROM
PORT : 5
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN RAPHAEL
BROM : MEID : C94533679E1D7AB0921F2CC661C601A5
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2112 | Manual : Enabled
BROM : SOCID : EFB8C859A143CE9C0884DF5F569EF3E5E3410095557D0CE9A79AD98372EE4A40
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA_1912sign.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6765
EMI : SRC : preloader_k62v1_64_bsp.bin
EMI : CNT : 0004
EMI : [00] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 512.00 MB ]
EMI : [01] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 2.00 GB ]
EMI : [02] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4.00 GB ]
EMI : [03] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 3.00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info
SRAM: 0x00038000 [ 224.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]
EMMC: 65646F4D204D4F521200000072658C3
EMMC: VEN : UNKNOWN | OEM : 6F64 | DEV : M MOR
EMMC:
BOOT1 : 0x00200000 [ 2.00 MB ]
BOOT2 : 0x00200000 [ 2.00 MB ]
RPMB : 0x00020000 [ 128.00 KB ]
[COLOR="#FF0000"]USER : 0x15B300000 [ 5.42 GB ][/COLOR]
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000
RNID : 1D07214CAF3D74729F107B3929D708E3
DA : USB : HIGH-SPEED
Boot done!
[FL] : HW verification passed!
SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432
[FL] : Pre-Erase
Erase : 0x0000000000000000 : 0x0000000003688000
Erase : 0x0000000005688000 : 0x0000000006000000
Erase : 0x000000000C800000 : 0x0000000000800000
Erase : 0x0000000010000000 : 0x0000000000200000
Erase : 0x0000000010500000 : 0x0000000008980000
Erase : 0x000000001CE80000 : 0x00000001CA980000
ERR : 0xC004000B
ERR : EXCEED AVALIABLE RANGE
ERR : 0x00000000|0x00000000
[DEBUG] : ERASE_BREAK , Skip erase
[FL] : RePartition
ERR : 0x00000000
ERR : OK
ERR : 0x00000000|0x00000000
[DEBUG] : REPARTITION_BREAK , Skip repartition
[FL] : Flashing now ...
Write : PRELOADER
FAIL : MMC ERROR
ERR : 0xC0040030
ERR : MMC ERROR
ERR : 0x00000000|0x0003BA3C
Error : Flashing failed!
>>> Seems as something wrong with device! Check battery charge and device state!
Reconnect Power/Cable!
[/SIZE][/B][/LEFT]استبدال الـ eMMC
بيانات الذاكرة البديلة على Medusa Pro
كود:
[LEFT][B][SIZE=2]Model Settings:
Interface : eMMC
Voltage : 2.8V
Bus Mode : 4 bits
Bus speed : 20 MHz
Connecting...
Device : Micron eMMC S0J38Y
Page size : 512 B
Block size : 512 B
Block count : 122142720
[COLOR="#FF0000"]Size : 58.24 GB (59640.00 MB)[/COLOR]
---------------------------------------------------------------
CID Info
CID : 13014E53304A333859100D149A2526AF
Manufacturer ID : 0X13
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4E
Product name : S0J38Y
Product revision : 1.0
Product serial number : (hex) D149A25
Manufacturing date : 02/2019
---------------------------------------------------------------
CSD Info
CSD : D05F01328F5913FFFFFFFFEF964000A9
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 50 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
[COLOR="#0000FF"]Revision 1.8 (for MMC v5.1)[/COLOR]
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 20348928 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/S0J38Y_18_01_2022_16_49_53.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.3; FW: 1.24.
[/SIZE][/B][/LEFT]بعد تركيب الـ eMMC فلاش على CM2MT2
كود:
[LEFT][B][SIZE=2]PTFN : MediaTek USB Port (COM5)
MODE : BOOTROM
PORT : 5
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN RAPHAEL
BROM : MEID : C94533679E1D7AB0921F2CC661C601A5
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2112 | Manual : Enabled
BROM : SOCID : EFB8C859A143CE9C0884DF5F569EF3E5E3410095557D0CE9A79AD98372EE4A40
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA_1912sign.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6765
EMI : SRC : preloader_k62v1_64_bsp.bin
EMI : CNT : 0004
EMI : [00] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 512.00 MB ]
EMI : [01] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 2.00 GB ]
EMI : [02] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4.00 GB ]
EMI : [03] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 3.00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info
SRAM: 0x00038000 [ 224.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]
EMMC: 13014E53304A333859100D149A2526AF
EMMC: VEN : MICRON | OEM : 4E01 | DEV : S0J38Y
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
[COLOR="#0000FF"] USER : 0xE8F800000 [ 58.24 GB ][/COLOR]
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000
RNID : 1D07214CAF3D74729F107B3929D708E3
DA : USB : HIGH-SPEED
Boot done!
[FL] : HW verification passed!
SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432
[FL] : Pre-Erase
Erase : 0x0000000000000000 : 0x0000000003688000
Erase : 0x0000000005688000 : 0x0000000006000000
Erase : 0x000000000C800000 : 0x0000000000800000
Erase : 0x0000000010000000 : 0x0000000000200000
Erase : 0x0000000010500000 : 0x0000000008980000
Erase : 0x000000001CE80000 : 0x00000001CA980000
[FL] : RePartition
[FL] : RePartition Ok!
[FL] : Flashing now ...
Write : PRELOADER
Update bootloader backup copy ...
Update bootloader backup copy Ok!
Write : RECOVERY
Write : EFUSE
Write : MD1IMG
Write : SPMFW
Write : SCP1
Write : SCP2
Write : SSPM_1
Write : SSPM_2
Write : LK
Write : LK2
Write : BOOT
Write : LOGO
Write : DTBO
Write : TEE1
Write : TEE2
Write : VENDOR
Write : SYSTEM
Write : VBMETA
Write : CACHE
Write : USERDATA
[FL] : RePartition
[FL] : RePartition Ok!
[FL] : Flashing finished!
Done!
Elapsed: 00:01:52
Reconnect Power/Cable!
[/SIZE][/B][/LEFT]
