السلام عليكم
كود:
[/FONT]
[FONT=Verdana]Waiting fastboot device ...[/FONT]
[FONT=Verdana]Device found[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Reading device Information...[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Device Model : DUB-LX1[/FONT]
[FONT=Verdana]Device Firmware : DUB-LX1 8.2.0.192(C185)[/FONT]
[FONT=Verdana]Country : MIDDLE EAST and AFRICA[/FONT]
[FONT=Verdana]Current Status : SAFE[/FONT]
[FONT=Verdana]Image : origin[/FONT]
[FONT=Verdana]Verify Mode : enforcing[/FONT]
[FONT=Verdana]Root Info. : safe[/FONT]
[FONT=Verdana]Lock State : LOCK[/FONT]
[FONT=Verdana]Root State : UNROOT[/FONT]
[FONT=Verdana]FB Lock : LOCK[/FONT]
[FONT=Verdana]FRP Unlock : LOCK[/FONT]
[FONT=Verdana]Device tampered : False[/FONT]
[FONT=Verdana]Device unlocked : False[/FONT]
[FONT=Verdana]Device critical unlocked : False[/FONT]
[FONT=Verdana]Charger screen enabled : False[/FONT]
[FONT=Verdana]
Welcome to Octoplus Huawei Software v.â€ھ1.2.7‬
كود:
[FONT=Verdana]
[/FONT]
[FONT=Verdana]To enable 'Manufacture' mode dial[/FONT]
[FONT=Verdana]- for Qualcomm and Hisilicon based models: *#*#2846579#*#*[/FONT]
[FONT=Verdana]ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode[/FONT]
[FONT=Verdana]- for MTK based models: *#*#14789632#*#*[/FONT]
[FONT=Verdana]ProjectMenu > Background Settings > USB Port Settings > Debug Mode[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]To enable 'Fastboot' mode[/FONT]
[FONT=Verdana]1. Power off the phone. Remove SD and SIM cards[/FONT]
[FONT=Verdana]2. Press 'Vol-' and insert USB cable[/FONT]
[FONT=Verdana]3. Wait until phone enters 'Fastboot' mode[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]To enable 'Upgrade' mode[/FONT]
[FONT=Verdana]1. Power off the phone. Remove SD and SIM cards[/FONT]
[FONT=Verdana]2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable[/FONT]
[FONT=Verdana]3. Wait until phone enters 'Upgrade mode'[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Found COM ports:[/FONT]
[FONT=Verdana]1: COM1 Communications Port[/FONT]
[FONT=Verdana]2: COM6 USB Serial Port[/FONT]
[FONT=Verdana]3: COM7 HUAWEI USB COM 1.0[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Job ID: 000000000205F68D[/FONT]
[FONT=Verdana]2021-12-25 10:15:32 GMT -------------------------------------------------[/FONT]
[FONT=Verdana]Starting Reset FRP[/FONT]
[FONT=Verdana]Selected phone model: â€ھDUB-LX1‬[/FONT]
[FONT=Verdana]Warning: oem get-build-number failed[/FONT]
[FONT=Verdana]Initializing remote service connection...[/FONT]
[FONT=Verdana]Connecting to phone..[/FONT]
[FONT=Verdana]Please, reconnect battery, connect USB cable with attached Test Point on your phone![/FONT]
[FONT=Verdana]Sending loader Qualcomm Snapdragon 450V.0.mbn...[/FONT]
[FONT=Verdana]Loader send successfully[/FONT]
[FONT=Verdana]Reconnecting, please wait..[/FONT]
[FONT=Verdana]Removing FRP lock...[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Reset FRP done.[/FONT]
[FONT=Verdana]Performed by â€ھ1.2.7‬ Software version.[/FONT]
[FONT=Verdana]
[/FONT]