ازالة قفل frp لجهاز Huawei Y6 Prime 2019 MRD-LX1F 9.1.0.383 بالتيست بوينت

[ProfKefah]

السلام عليكم

كالمواضيع ادناها


ازالة قفل FRP لهاتف Huawei Y6 Prime 2019 MRD-LX1F بالتيست بوينت 234

: ازالة قفل FRP لهاتف Huawei Y6 Prime 2019 MRD-LX1F بالتيست بوينت 9.1.0.271



ازالة قفل FRP لجهاز Huawei Y6 Prime 2019 MRD-LX1F بالتيست بوينت حماية 9.1.0.324



: ازالة قفل FRP لجهاز Huawei Y6 Prime 2019 MRD-LX1F بالتيست بوينت الحماية 340



ازالة قفل FRP لهاتف Huawei Y6 Prime 2019 MRD-LX1F بالتيست بوينت 9.1.0.349



الا ان الحماية اعلى

Waiting fastboot device ...
Device found


Reading device Information...


Device Model : MRD-LX1F
Device Firmware : MRD-L41A 9.1.0.383(C185E6R4P1)
Country : MIDDLE EAST and AFRICA
Current Status : SAFE
FB Lock : LOCK
FRP Unlock : LOCK


Welcome to Octoplus Huawei Software v.?1.2.6?


To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode


To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode


To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'


Found COM ports:
1: COM1 Communications Port
2: COM16 USB Serial Port


Job ID: 0000000001D0CFE4
2021-11-14 13:38:31 GMT -------------------------------------------------
Starting Reset FRP
Selected phone model: ?MRD-LX1?
Please, put your device in Factory mode (use "ON/OFF Factory Mode" option or Hardware Test Point) and insert USB cable
Detected ?MediaTek USB Port? port


Detecting Chip Version...
HW Chip : MT6761
HW Version : 8A00.CA01.0200.0000
Reconnecting...


Detecting Chip Version...
HW Chip : MT6761
HW Version : 8A00.CA01.0200.0000
Initializing remote service connection...
Downloading Download Agent data...
Downloading additional resources...
Using MTK_AllInOne_DA_v3.3001.2018/10/18.17:38_452898 download agent...
Found a suitable Download agent.
Sending Download Agent...
DA successfully sent
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: brom
Sending BootLoader Info...
Initializing remote service connection...
Downloading preloader data...
Downloading additional resources...
Initializing Memory Flash...
Initialization completed
Sending Loader...
Mobile Status: SYNC
Loader successfully sent
Reading Flash Info...
EMMC rpmb size : 16 Mb
EMMC boot1 size : 4 Mb
EMMC boot2 size : 4 Mb
EMMC gp1 size : 0 Mb
EMMC gp2 size : 0 Mb
EMMC gp3 size : 0 Mb
EMMC gp4 size : 0 Mb
EMMC user area size : 29820 Mb
Downloading additional resources...
Reading Partition Table
Reading FRP Partition
Removing FRP secure data...


Reset FRP done.
Performed by ?1.2.6? Software version.