طلب dump condor g6
- بادئ الموضوع imad_gsm
- تاريخ البدء
- الحالة
رد: طلب dump condor g6
قم بوضع الذاكرة في Adapter EMMC BGA
او تلحيم نقاط التوصيل مباشرة الى الذاكرة اذا لم تملك Adapter
اذهب الى قائمة Factory Repair
ثم قم بتمرير Firmware رسمي للهاتف
اذا استعملت ذاكرة اكبر اذهب الى قائمة EMMC Service و اعمل Rezise كي تعدل منطقة UserData لتزيد المساحة حسب حجم الذاكرة.
قم بوضع الذاكرة في Adapter EMMC BGA
او تلحيم نقاط التوصيل مباشرة الى الذاكرة اذا لم تملك Adapter
اذهب الى قائمة Factory Repair
ثم قم بتمرير Firmware رسمي للهاتف
اذا استعملت ذاكرة اكبر اذهب الى قائمة EMMC Service و اعمل Rezise كي تعدل منطقة UserData لتزيد المساحة حسب حجم الذاكرة.
رد: طلب dump condor g6
شكرا لك اخي
يعني تمرير Firmware كفيل باعادة تقسيم مناطق Boot1/Boot2/rpmB
شكرا لك اخي
يعني تمرير Firmware كفيل باعادة تقسيم مناطق Boot1/Boot2/rpmB
رد: طلب dump condor g6
كود:
[FONT=Almarai]Model Settings:[/FONT]
[FONT=Almarai]Interface : eMMC[/FONT]
[FONT=Almarai]Voltage : 1.8V[/FONT]
[FONT=Almarai]Bus Mode : 1 bit[/FONT]
[FONT=Almarai]Bus speed : Auto[/FONT]
[FONT=Almarai]Connecting...[/FONT]
[FONT=Almarai]Device : Samsung eMMC AWMB3R[/FONT]
[FONT=Almarai]Page size : 512 B[/FONT]
[FONT=Almarai]Block size : 512 B[/FONT]
[FONT=Almarai]Block count : 30535680[/FONT]
[FONT=Almarai]Size : 14.56 GB (14910.00 MB)[/FONT]
[FONT=Almarai]---------------------------------------------------------------[/FONT]
[FONT=Almarai]CID Info[/FONT]
[FONT=Almarai]CID : 15010041574D423352019B5F5B9AC07F[/FONT]
[FONT=Almarai]Manufacturer ID : 0X15[/FONT]
[FONT=Almarai]Device/BGA : BGA (Discrete embedded)[/FONT]
[FONT=Almarai]OEM/Application ID : 0X00[/FONT]
[FONT=Almarai]Product name : AWMB3R[/FONT]
[FONT=Almarai]Full name one from : KLMAG2WEMB-B031[/FONT]
[FONT=Almarai]Product revision : 0.1[/FONT]
[FONT=Almarai]Product serial number : (hex) 9B5F5B9A[/FONT]
[FONT=Almarai]Manufacturing date : 12/2013[/FONT]
[FONT=Almarai]---------------------------------------------------------------[/FONT]
[FONT=Almarai]CSD Info[/FONT]
[FONT=Almarai]CSD : D02701320F5903FFF6DBFFEF92404009[/FONT]
[FONT=Almarai]CSD structure : CSD version No. 1.2[/FONT]
[FONT=Almarai]SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,[/FONT]
[FONT=Almarai]4.51, 5.0, 5.01, 5.1[/FONT]
[FONT=Almarai]Data read access time1: 15 ms[/FONT]
[FONT=Almarai]TRAN speed : 26 MHz[/FONT]
[FONT=Almarai]READ block length : 512 Bytes[/FONT]
[FONT=Almarai]WP group enable : YES[/FONT]
[FONT=Almarai]PERM_WRITE_PROTECT : NO[/FONT]
[FONT=Almarai]TMP_WRITE_PROTECT : NO[/FONT]
[FONT=Almarai]---------------------------------------------------------------[/FONT]
[FONT=Almarai]EXTCSD Info[/FONT]
[FONT=Almarai]Revision 1.7 (for MMC v5.0, v5.01)[/FONT]
[FONT=Almarai]Erase block size : 512 Kbytes[/FONT]
[FONT=Almarai]Boot1 size : 4096 Kbytes[/FONT]
[FONT=Almarai]Boot2 size : 4096 Kbytes[/FONT]
[FONT=Almarai]RPMB size : 512 Kbytes[/FONT]
[FONT=Almarai]Partition config : (0x08) 00001000[/FONT]
[FONT=Almarai]Boot partition enable : Boot partition 1[/FONT]
[FONT=Almarai](Bus width = 1Bit)[/FONT]
[FONT=Almarai]Boot ACK : No boot acknowledge sent (default)[/FONT]
[FONT=Almarai]Boot bus conditions : (0x00) 00000000[/FONT]
[FONT=Almarai]Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)[/FONT]
[FONT=Almarai]Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)[/FONT]
[FONT=Almarai]Boot mode : Use single data rate + backward compatible timings in boot operation (default)[/FONT]
[FONT=Almarai]RST_n function : (0x00) RST_n signal is temporary disabled (default)[/FONT]
[FONT=Almarai]Partitioning support : Device supports partitioning features[/FONT]
[FONT=Almarai]Enhanced attribute : Device can have enhanced technological features in partitions and user data area.[/FONT]
[FONT=Almarai]Max enhanced data size: 5087232 Kbytes[/FONT]
[FONT=Almarai]Partitions attribute : 0x0[/FONT]
[FONT=Almarai]Part setting completed: 0x0[/FONT]
[FONT=Almarai]GP partition 1 size : 0 b[/FONT]
[FONT=Almarai]GP partition 2 size : 0 b[/FONT]
[FONT=Almarai]GP partition 3 size : 0 b[/FONT]
[FONT=Almarai]GP partition 4 size : 0 b[/FONT]
[FONT=Almarai]Enhanced area size : (0x0) 0 b[/FONT]
[FONT=Almarai]Enhanced area start : (0x0) 0 b[/FONT]
[FONT=Almarai]Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/AWMB3R_08_11_2021_10_47_56.bin.[/FONT]
[FONT=Almarai]Connect successful.[/FONT]
[FONT=Almarai]---------------------------------------------------------------[/FONT]
[FONT=Almarai]SW: 2.2.2; FW: 1.24.[/FONT]
[FONT=Almarai]P00: GPT (00000000, 00000800) 1024 KB[/FONT]
[FONT=Almarai]P01: prodnv (00000800, 00002800) 5 MB[/FONT]
[FONT=Almarai]P02: miscdata (00003000, 00000800) 1024 KB[/FONT]
[FONT=Almarai]P03: l_fixnv1 (00003800, 00000800) 1024 KB[/FONT]
[FONT=Almarai]P04: l_fixnv2 (00004000, 00000800) 1024 KB[/FONT]
[FONT=Almarai]P05: l_runtimenv1 (00004800, 00000800) 1024 KB[/FONT]
[FONT=Almarai]P06: l_runtimenv2 (00005000, 00000800) 1024 KB[/FONT]
[FONT=Almarai]P07: l_modem (00005800, 00009800) 19 MB[/FONT]
[FONT=Almarai]P08: l_ldsp (0000F000, 00001800) 3072 KB[/FONT]
[FONT=Almarai]P09: l_gdsp (00010800, 00001800) 3072 KB[/FONT]
[FONT=Almarai]P10: l_warm (00012000, 00001800) 3072 KB[/FONT]
[FONT=Almarai]P11: pm_sys (00013800, 00000800) 1024 KB[/FONT]
[FONT=Almarai]P12: logo (00014000, 00000800) 1024 KB[/FONT]
[FONT=Almarai]P13: fbootlogo (00014800, 00000800) 1024 KB[/FONT]
[FONT=Almarai]P14: wcnfdl (00015000, 00000800) 1024 KB[/FONT]
[FONT=Almarai]P15: wcnmodem (00015800, 00005000) 10 MB[/FONT]
[FONT=Almarai]P16: boot (0001A800, 0000A000) 20 MB[/FONT]
[FONT=Almarai]P17: system (00024800, 00546000) 2700 MB[/FONT]
[FONT=Almarai]P18: persist (0056A800, 00001000) 2048 KB[/FONT]
[FONT=Almarai]P19: sysinfo (0056B800, 00003000) 6 MB[/FONT]
[FONT=Almarai]P20: cache (0056E800, 0004B000) 150 MB[/FONT]
[FONT=Almarai]P21: recovery (005B9800, 0000A000) 20 MB[/FONT]
[FONT=Almarai]P22: misc (005C3800, 00000800) 1024 KB[/FONT]
[FONT=Almarai]P23: userdata (005C4000, 0175B000) 11.68 GB[/FONT]
[FONT=Almarai]---------------------------------------------------------------[/FONT]
[FONT=Almarai]Searching Android build info...[/FONT]
[FONT=Almarai]Ok[/FONT]
[FONT=Almarai]Disk/Image size : a3e00000 bytes[/FONT]
[FONT=Almarai]Device sector size : 512 bytes[/FONT]
[FONT=Almarai]Partition offset : 149504[/FONT]
[FONT=Almarai]Number of sectors : 5529600[/FONT]
[FONT=Almarai]Device Manufacturer : Micromax[/FONT]
[FONT=Almarai]Device Platform : sc8830[/FONT]
[FONT=Almarai]Build ID : MRA58K[/FONT]
[FONT=Almarai]Display Build ID : MMX_Q4201_SW_V8.0.5_HW_V2.0.0_200916[/FONT]
[FONT=Almarai]Release ID : 6.0[/FONT]
[FONT=Almarai]Device Model : Micromax Q4201[/FONT]
[FONT=Almarai]Device Name : Q4201[/FONT]
[FONT=Almarai]Architecture ABI : armeabi-v7a[/FONT]
[FONT=Almarai]Architecture ABI2 : armeabi[/FONT]
[FONT=Almarai]Architecture ABI List : armeabi-v7a,armeabi[/FONT]
[FONT=Almarai]Build Description : zsl829_mmx-user 6.0 MRA58K 1020 release-keys[/FONT]رد: طلب dump condor g6
استخدم Firmware رسمي
استخدم Firmware رسمي
كود:
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC AWMB3R
Page size : 512 B
Block size : 512 B
Block count : 30535680
Size : 14.56 GB (14910.00 MB)
---------------------------------------------------------------
CID Info
CID : 15010041574D423352019B5F5B9AC07F
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : AWMB3R
Full name one from : KLMAG2WEMB-B031
Product revision : 0.1
Product serial number : (hex) 9B5F5B9A
Manufacturing date : 12/2013
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF92404009
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 512 Kbytes
Partition config : (0x08) 00001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 5087232 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/AWMB3R_08_11_2021_10_47_56.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.2; FW: 1.24.
P00: GPT (00000000, 00000800) 1024 KB
P01: prodnv (00000800, 00002800) 5 MB
P02: miscdata (00003000, 00000800) 1024 KB
P03: l_fixnv1 (00003800, 00000800) 1024 KB
P04: l_fixnv2 (00004000, 00000800) 1024 KB
P05: l_runtimenv1 (00004800, 00000800) 1024 KB
P06: l_runtimenv2 (00005000, 00000800) 1024 KB
P07: l_modem (00005800, 00009800) 19 MB
P08: l_ldsp (0000F000, 00001800) 3072 KB
P09: l_gdsp (00010800, 00001800) 3072 KB
P10: l_warm (00012000, 00001800) 3072 KB
P11: pm_sys (00013800, 00000800) 1024 KB
P12: logo (00014000, 00000800) 1024 KB
P13: fbootlogo (00014800, 00000800) 1024 KB
P14: wcnfdl (00015000, 00000800) 1024 KB
P15: wcnmodem (00015800, 00005000) 10 MB
P16: boot (0001A800, 0000A000) 20 MB
P17: system (00024800, 00546000) 2700 MB
P18: persist (0056A800, 00001000) 2048 KB
P19: sysinfo (0056B800, 00003000) 6 MB
P20: cache (0056E800, 0004B000) 150 MB
P21: recovery (005B9800, 0000A000) 20 MB
P22: misc (005C3800, 00000800) 1024 KB
P23: userdata (005C4000, 0175B000) 11.68 GB
---------------------------------------------------------------
Searching Android build info...
Ok
Disk/Image size : [COLOR=#ff0000][B]a3e00000 bytes[/B][/COLOR]
Device sector size : [COLOR=#ff0000][B]512 bytes[/B][/COLOR]
Partition offset : [COLOR=#ff0000][B]149504[/B][/COLOR]
Number of sectors : [COLOR=#ff0000][B]5529600[/B][/COLOR]
Device Manufacturer : [B][COLOR=#ff0000]Micromax[/COLOR][/B]
Device Platform : [COLOR=#ff0000][B]sc8830[/B][/COLOR]
Build ID : [B][COLOR=#ff0000]MRA58K[/COLOR][/B]
Display Build ID : [COLOR=#ff0000][B]MMX_Q4201_SW_V8.0.5_HW_V2.0.0_200916[/B][/COLOR]
Release ID : [COLOR=#ff0000][B]6.0[/B][/COLOR]
Device Model : [B][COLOR=#ff0000]Micromax Q4201[/COLOR][/B]
Device Name : [COLOR=#ff0000][B]Q4201[/B][/COLOR]
Architecture ABI : [COLOR=#ff0000][B]armeabi-v7a[/B][/COLOR]
Architecture ABI2 :[COLOR=#ff0000][B] armeabi[/B][/COLOR]
Architecture ABI List : [COLOR=#ff0000][B]armeabi-v7a,armeabi[/B][/COLOR]
Build Description : [B][COLOR=#ff0000]zsl829_mmx-user 6.0 MRA58K 1020 release-keys[/COLOR][/B]
كود:
Model Settings:Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC 8WPD3R
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info
CID : 1501003857504433520058EBEE12C3C7
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 8WPD3R
Product revision : 0.0
Product serial number : (hex) 58EBEE12
Manufacturing date : 12/2016
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 512 Kbytes
Partition config : (0x08) 00001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 2539520 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/8WPD3R_07_11_2021_18_44_05.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.2; FW: 1.24.
P00: GPT (00000000, 00000800) 1024 KB
P01: prodnv (00000800, 00002800) 5 MB
P02: miscdata (00003000, 00000800) 1024 KB
P03: l_fixnv1 (00003800, 00000800) 1024 KB
P04: l_fixnv2 (00004000, 00000800) 1024 KB
P05: l_runtimenv1 (00004800, 00000800) 1024 KB
P06: l_runtimenv2 (00005000, 00000800) 1024 KB
P07: l_modem (00005800, 00009800) 19 MB
P08: l_ldsp (0000F000, 00001800) 3072 KB
P09: l_gdsp (00010800, 00001800) 3072 KB
P10: l_warm (00012000, 00001800) 3072 KB
P11: pm_sys (00013800, 00000800) 1024 KB
P12: logo (00014000, 00000800) 1024 KB
P13: fbootlogo (00014800, 00000800) 1024 KB
P14: wcnfdl (00015000, 00000800) 1024 KB
P15: wcnmodem (00015800, 00005000) 10 MB
P16: boot (0001A800, 0000A000) 20 MB
P17: system (00024800, 00546000) 2700 MB
P18: persist (0056A800, 00001000) 2048 KB
P19: sysinfo (0056B800, 00003000) 6 MB
P20: cache (0056E800, 0004B000) 150 MB
P21: recovery (005B9800, 0000A000) 20 MB
P22: misc (005C3800, 00000800) 1024 KB
P23: userdata (005C4000, 008CBFDF) 4.398 GB
---------------------------------------------------------------
Searching Android build info...
Ok
Disk/Image size : d2000000 bytes
Device sector size : 512 bytes
Partition offset : 149504
Number of sectors : 5529600
Device Manufacturer : [COLOR=#ff0000][B]CONDOR[/B][/COLOR]
Device Platform : sc8830
Build ID : MRA58K
Display Build ID : [COLOR=#ff0000][B]PHQ525_AR_V19.0_20161111[/B][/COLOR]
Release ID : 6.0
Device Model : [COLOR=#ff0000][B]PHQ525[/B][/COLOR]
Device Name : [COLOR=#ff0000][B]PHQ525[/B][/COLOR]
Architecture ABI : armeabi-v7a
Architecture ABI2 : armeabi
Architecture ABI List : armeabi-v7a,armeabi
Build Description :[B][COLOR=#ff0000] zsl829_condor-user 6.0 MRA58K 1478784994 release-keys[/COLOR][/B]
---------------------------------------------------------------
رد: طلب dump condor g6
كتابة ملف الشبكة
كتابة ملف الشبكة
رد: طلب dump condor g6
اعد التفليش وعلم على خانة update nvm
اعد التفليش وعلم على خانة update nvm
رد: طلب dump condor g6
نفس الخلل اخي دحماني
الهاتف عند تشغيله ليس به imie
بالرغم من نجاح كل العمليات على cm2
نفس الخلل اخي دحماني
الهاتف عند تشغيله ليس به imie
بالرغم من نجاح كل العمليات على cm2
رد: طلب dump condor g6
عند تمرير هذه الفلاشة يرجع imie مغاير للهاتف
https://www.dzgsm.com/vb/threads/66496-griffe-g6-imei/
لكن menu الجهاز يتغير لجهاز اخر
عند تمرير هذه الفلاشة يرجع imie مغاير للهاتف
https://www.dzgsm.com/vb/threads/66496-griffe-g6-imei/
لكن menu الجهاز يتغير لجهاز اخر
- الحالة