Frp Tecno BC3 pop 4 pro
- بادئ الموضوع selmigsm
- تاريخ البدء
-
- الوسوم
- bc3 pop 4 pro
رد: Frp Tecno BC3 pop 4 pro
Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM22 [USB Serial Device (COM22)]
Device Path: \\?\usb#vid_0e8d&pid_0003#5&13910183&0&2#{f9f3ff14-ae21-48a0-8a25-8011a7a931d9}
Chipset: 0x0699, [MT6739/MT6731] [Unknown]
Hardware Info: 0x8A00, 0xCA00, 0x00
Config : [SecureBoot: True] [SLA: False] [DA Auth: True]
MEID: 7B342DD2E89EC150E212C55AF9A55CAF
Preparing device...
-- Success!
Preloader saved as : preloader_tecno_bc3_220917_213208.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : USB Serial Device (COM22)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Information...
-- Could not read!
Userdata is ENCRYPTED
Seeking FRP Data...
umt pro
Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM22 [USB Serial Device (COM22)]
Device Path: \\?\usb#vid_0e8d&pid_0003#5&13910183&0&2#{f9f3ff14-ae21-48a0-8a25-8011a7a931d9}
Chipset: 0x0699, [MT6739/MT6731] [Unknown]
Hardware Info: 0x8A00, 0xCA00, 0x00
Config : [SecureBoot: True] [SLA: False] [DA Auth: True]
MEID: 7B342DD2E89EC150E212C55AF9A55CAF
Preparing device...
-- Success!
Preloader saved as : preloader_tecno_bc3_220917_213208.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : USB Serial Device (COM22)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Information...
-- Could not read!
Userdata is ENCRYPTED
Seeking FRP Data...
umt pro
hamada.tam
عضو
- إنضم
- 2 مايو 2016
- المشاركات
- 6
- مستوى التفاعل
- 0
- النقاط
- 0
رد: Frp Tecno BC3 pop 4 pro
الطريقة الصحيحة cm2
0_base : BASE_v2044
BROM: MEID : 7BB3516A2A61BDA8C61E81902231E518
BROM: SecLevel : 0x000000E5
BROM: SecMode : SBC+SDA+EXT
BROM: BROM|BL : 0x05|0xFE
BROM: BOOTROM
BROM: SOCID: A202CCC9C1620B5E3FC9B7A990E8C7C7C2D956B9E13ADEE570A981D69D1DF05D
BROM: SLA : Local Auth
BROM: SLA : Starting Auth
BROM: SLA : Auth Passed
BROM: SEC : 0x000000E0
AGENT : 0_base : BASE_v2044 | Manual : Disabled
AGENT : Looking for suitable BootChain in DA...
AGENT : [27da5d71] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2044\MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA...
BROM: DA sent
BROM: Transfer control to DA...
DA : AGENT started
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized
EMI: FireFly preloader_tecno_bc3.bin with 7 memory type(s) supported
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed
DA : BOOT to 2nd DA...
DA : 2ND stage confirmed
DA : SYNC with DA passed
DA : Receiving HW info
SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x40000000 [ 1.00 GB ]
EMMC: CID: 1501004645363241420905AE970E1849
EMMC: VEN: Samsung : OEM: 0 : ID: 464536324142 : PRV: 0x09
EMMC: VEN: Samsung : FE62AB
EMMC: SNN: 95328014 ( 0x05AE970E ) MF: 1/2021
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x3A3E00000 [ 14.56 GB ]
CHIP: MT6739 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0699
CODE: Zion
TYPE: MODERN [RAPHAEL]
RNID: 3616096DD8B19FF425D19CC96F06DF56
DA: USB : HIGH-SPEED
Boot done
Verify device config...
Ok
No loaders to verify
Format Ok: RESET PROTECTION
Done
Elapsed: 00:01:04
Reconnect Power/Cable now
الطريقة الصحيحة cm2
0_base : BASE_v2044
BROM: MEID : 7BB3516A2A61BDA8C61E81902231E518
BROM: SecLevel : 0x000000E5
BROM: SecMode : SBC+SDA+EXT
BROM: BROM|BL : 0x05|0xFE
BROM: BOOTROM
BROM: SOCID: A202CCC9C1620B5E3FC9B7A990E8C7C7C2D956B9E13ADEE570A981D69D1DF05D
BROM: SLA : Local Auth
BROM: SLA : Starting Auth
BROM: SLA : Auth Passed
BROM: SEC : 0x000000E0
AGENT : 0_base : BASE_v2044 | Manual : Disabled
AGENT : Looking for suitable BootChain in DA...
AGENT : [27da5d71] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2044\MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA...
BROM: DA sent
BROM: Transfer control to DA...
DA : AGENT started
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized
EMI: FireFly preloader_tecno_bc3.bin with 7 memory type(s) supported
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed
DA : BOOT to 2nd DA...
DA : 2ND stage confirmed
DA : SYNC with DA passed
DA : Receiving HW info
SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x40000000 [ 1.00 GB ]
EMMC: CID: 1501004645363241420905AE970E1849
EMMC: VEN: Samsung : OEM: 0 : ID: 464536324142 : PRV: 0x09
EMMC: VEN: Samsung : FE62AB
EMMC: SNN: 95328014 ( 0x05AE970E ) MF: 1/2021
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x3A3E00000 [ 14.56 GB ]
CHIP: MT6739 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0699
CODE: Zion
TYPE: MODERN [RAPHAEL]
RNID: 3616096DD8B19FF425D19CC96F06DF56
DA: USB : HIGH-SPEED
Boot done
Verify device config...
Ok
No loaders to verify
Format Ok: RESET PROTECTION
Done
Elapsed: 00:01:04
Reconnect Power/Cable now