تم اصلاح هاتف كندور T7 باعادة برمجة وتمرير ملفات الاصلاح
ملفات مسحوبة من هاتف سليم
كود:
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC FE62MB
Page size : 512 B
Block size : 512 B
Block count : 30535680
Size : 14.56 GB (14910.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100464536324D4203F5C5F225B53B
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : FE62MB
Product revision : 0.3
Product serial number : (hex) F5C5F225
Manufacturing date : 11/2018
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7626752 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/FE62MB_10_05_2021_21_31_20.bin.
Connect successful.READ boot area partition 1
boot area partition 2
EXT_CSD :up:
كود:
Switched to boot area partition 1.
Opening C:/Users/m/Desktop/Samsung eMMC FE62MB_10_05_2021_23_27_00.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 2.2.0.1; FW: 1.24.
Switched to boot area partition 2.
Opening C:/Users/m/Desktop/Samsung eMMC FE62MB_10_05_2021_23_27_18.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 2.2.0.1; FW: 1.24.
EXT_CSD saved to file C:/Users/m/Desktop/EXT_CSD_10_05_2021_23_27_41.bin.
Switched to user area.
Opening C:/Users/m/Desktop/Samsung eMMC FE62MB_10_05_2021_23_27_56.bin file...
Reading. Please wait...
Canceled...
Elapsed time 00:07:30
SW: 2.2.0.1; FW: 1.SRF CONDOR T7
كود:
Switched to boot area partition 1.
Opening C:/Users/m/Desktop/Samsung eMMC FE62MB_10_05_2021_23_27_00.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 2.2.0.1; FW: 1.24.
Switched to boot area partition 2.
Opening C:/Users/m/Desktop/Samsung eMMC FE62MB_10_05_2021_23_27_18.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 2.2.0.1; FW: 1.24.
EXT_CSD saved to file C:/Users/m/Desktop/EXT_CSD_10_05_2021_23_27_41.bin.
Switched to user area.
Opening C:/Users/m/Desktop/Samsung eMMC FE62MB_10_05_2021_23_27_56.bin file...
Reading. Please wait...
Canceled...
Elapsed time 00:07:30
SW: 2.2.0.1; FW: 1.24.
Partition table has been found on device.
Please select file.
Switched to boot area partition 1.
Added partition BOOT1 to constructor file.
Switched to boot area partition 2.
Added partition BOOT2 to constructor file.
Switched to user area.
Added partition GPT to constructor file.
Added partition boot_para to constructor file.
Added partition recovery to constructor file.
Added partition para to constructor file.
Added partition expdb to constructor file.
Added partition frp to constructor file.
Added partition nvcfg to constructor file.
Added partition nvdata to constructor file.
Added partition metadata to constructor file.
Added partition protect1 to constructor file.
Added partition protect2 to constructor file.
Added partition seccfg to constructor file.
Added partition persist to constructor file.
Added partition sec1 to constructor file.
Added partition proinfo to constructor file.
Added partition md1img to constructor file.
Added partition md1dsp to constructor file.
Added partition spmfw to constructor file.
Added partition mcupmfw to constructor file.
Added partition gz1 to constructor file.
Added partition gz2 to constructor file.
Added partition nvram to constructor file.
Added partition lk to constructor file.
Added partition lk2 to constructor file.
Added partition loader_ext1 to constructor file.
Added partition loader_ext2 to constructor file.
Added partition boot to constructor file.
Added partition logo to constructor file.
Added partition odmdtbo to constructor file.
Added partition tee1 to constructor file.
Added partition tee2 to constructor file.
Added partition vendor to constructor file.
Added partition flashinfo to constructor file.
SRF "C:/Program Files/Medusa Pro Software/firmwareFolder/[COLOR="#FF0000"]condor_T7 BY DAHMANI.srf[/COLOR]" has been installed successfully.
[/CODE
[/B]
[B][COLOR="#B22222"][SIZE=5]firmwareFolder/condor_T7 BY DAHMANI.srf"
[/SIZE][/COLOR][/B]
[B][CODE]Repairing from file "C:/Program Files/Medusa Pro Software/firmwareFolder/condor_T7 BY DAHMANI.srf".
Write data verification is enabled.
Switched to boot area partition 1.
Writing BOOT1 partition... Done.
Switched to boot area partition 2.
Writing BOOT2 partition... Done.
Switched to user area.
Writing GPT partition... Done.
Writing boot_para partition... Done.
Writing recovery partition... Done.
Writing para partition... Done.
Writing expdb partition... Done.
Writing frp partition... Done.
Writing nvcfg partition... Done.
Writing nvdata partition... Done.
Writing metadata partition... Done.
Writing protect1 partition... Done.
Writing protect2 partition... Done.
Writing seccfg partition... Done.
Writing persist partition... Done.
Writing sec1 partition... Done.
Writing proinfo partition... Done.
Writing md1img partition... Done.
Writing md1dsp partition... Done.
Writing spmfw partition... Done.
Writing mcupmfw partition... Done.
Writing gz1 partition... Done.
Writing gz2 partition... Done.
Writing nvram partition... Done.
Writing lk partition... Done.
Writing lk2 partition... Done.
Writing loader_ext1 partition... Done.
Writing loader_ext2 partition... Done.
Writing boot partition... Done.
Writing logo partition... Done.
Writing odmdtbo partition... Done.
Writing tee1 partition... Done.
Writing tee2 partition... Done.
Writing vendor partition...
