السلام عليكم ورحمة الله وبركاته
تم بفضل الله النجاح في تغيير EMMC
من تابليت CONDOR نسيت موديل :strongly:
ذاكرة من نوع KINGSTON مع زيادة حجم الذاكرة وسرعة الاداء
لوغ فشل العملية (تلف EMMC)
لوغ بعدتغيير EMMC
LOG FLASH AND FORMAT
نجاح العملية :
لا تنســــــــــــونا من دعواتكــــم في هذا الشهــــــــــــــــــــــر
تم بفضل الله النجاح في تغيير EMMC
من تابليت CONDOR نسيت موديل :strongly:
ذاكرة من نوع KINGSTON مع زيادة حجم الذاكرة وسرعة الاداء
لوغ فشل العملية (تلف EMMC)
كود:
Operation : Identify [ v2.11 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
[COLOR="#B22222"]>>> ERROR : FLASH FDL NOT started![/COLOR]
>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!
Reconnect Power/Cable!لوغ بعدتغيير EMMC
كود:
[B]Operation : Identify [ v2.11 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0004
[COLOR="#0000CD"]FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
[/COLOR]FDL : Control transfered!
Boot Done!
[/B]LOG FLASH AND FORMAT
كود:
[B]Operation : Flash Firmware [ v2.11 ]
Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0004
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : Control transfered!
Boot Done!
PMTMng : Load PMT
PMTMng : 0x24
PMTMng : Update PMT Ok!
UBOOT : u-boot.bin
UBOOT : u-boot.bin
CODE : sml.bin
CODE : sml.bin
CODE : tos.bin
CODE : tos.bin
CODE : vbmeta.img
CODE : vbmeta.img
CODE : dtb.img
CODE : dtbo.img
CODE : ldsp_l.bin
CODE : gdsp_l.bin
CODE : modem_l.bin
CODE : modem_wcn.img
CODE : gnssmodem.bin
CODE : gnssbdmodem.bin
CODE : pm_sys.bin
CODE : boot.img
CODE : recovery.img
FSIMG : persist.img
CODE : boot_logo.bmp
CODE : fastboot_logo.bmp
FSIMG : system.img
FSIMG : vendor.img
FSIMG : otp_product.img
FSIMG : userdata.img
FSIMG : cache.img
FSIMG : prodnv.img
UBOOT : u-boot-spl.bin
ERASE : FLASH_L
ERASE : MISC
ERASE : UBOOT_LOG
[COLOR="#4B0082"][B]Flashing finished!
[/B][/COLOR]Reconnect Power/Cable!
Done!
Elapsed: 00:08:58
Operation : Format FS / Reset Settings [ v2.11 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0004
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : Control transfered!
Boot Done!
[COLOR="#800080"]Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP
[/COLOR]
Reconnect Power/Cable!
Done!
Elapsed: 00:01:21
[/B]نجاح العملية :
لا تنســــــــــــونا من دعواتكــــم في هذا الشهــــــــــــــــــــــر
