السلام عليكم
عندي مشكلة في هاتف DOOGEE X53
عند القيام بحذف frp العملية ناجحة 100/100
لكن عند عملية التلفيش لايمر و هذا انفو العملية
عندي مشكلة في هاتف DOOGEE X53
عند القيام بحذف frp العملية ناجحة 100/100
لكن عند عملية التلفيش لايمر و هذا انفو العملية
Operation : Write Flash [ v2.06 ]
Repartition : Enabled
Flash Verify : Disabled
Reg.Pre-Erase : Enabled
Verify HW/SW : Enabled
SData Backup : Disabled
Safe UserData : Disabled
Files :11
[FL] : Set : preloader_zechin6580_we_n.bin
[FL] : Set : lk.bin
[FL] : Set : boot.img
[FL] : Set : recovery.img
[FL] : Set : logo.bin
[FL] : Set : trustzone1.img
[FL] : Set : trustzone2.img
[FL] : Set : secro.img
[FL] : Set : system.img
[FL] : Set : cache.img
[FL] : Set : userdata.img
[FL] : Total size : 0xC60B8CF8 [ 3,09 GB ]
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port (COM4)
MODE : BOOTROM
PORT : 4
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : SecLevel : 0x00000001
BROM : SecMode : SBC
BROM : BOOTROM
MODE : 0_base : BASE_v1724 | Manual : Disabled
Fail to disable Dog!
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 460001154D323645E5720342139563D8
DAInf: 4 : 2 : 156
DA : EXT_RAM NOT initialized!
eMMC : OK
eMMC : 150100464536324D420372E5D8639513
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
EMI : DEV : MT6752
EMI : SRC : preloader_zechin6580_we_n.bin
EMI : CNT : 0004
EMI : [00] : eMCP : eMMC+LP/DDR3 , ID : 150100464531324D42 : VEN : SAMSUNG | DEV : FE12MB : RAM : [ 1,00 GB ]
EMI : [01] : eMCP : eMMC+LP/DDR3 , ID : 150100463832324D42 : VEN : SAMSUNG | DEV : F822MB : RAM : [ 1,00 GB ]
EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 90014A484147326505 : VEN : HYNIX | DEV : HAG2e : RAM : [ 1,00 GB ]
EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 450100445331303136 : VEN : SANDISK | DEV : DS1016 : RAM : [ 1,00 GB ]
EMI : Init EMI from PRELOADER
INIT : 0xBC : PRELOADER_INFO [ 0x00000000 : [ 0 B ] ]
DA : Failed to configure DA!
ERROR : 00000BC4 : DEVICE NOT FOUND
Error : Fail to init protocol!
Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!
Reconnect Power/Cable!
و هذا أنفو الهاتف
Operation : Identify [ v2.06 ]
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port (COM4)
MODE : BOOTROM
PORT : 4
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : SecLevel : 0x00000001
BROM : SecMode : SBC
BROM : BOOTROM
MODE : 0_base : BASE_v1712 | Manual : Disabled
Fail to disable Dog!
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 460001154D323645E5720342139563D8
DAInf: 4 : 2 : 156
DA : EXT_RAM NOT initialized!
eMMC : OK
eMMC : 150100464536324D420372E5D8639513
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
EMI : DEV : INFINITY
EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
INIT : 0xBC : LP/DDR3 [ 0x00000000 : [ 0 B ] ]
DRAM : DRAM: 0x40000000 [ 1,00 GB ]
DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info
EMMC: 150100464536324D420372E5D8639513
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : FE62MB
EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0x3A3E00000 [ 14,56 GB ]
SRAM: 0x00020000 [ 128,00 KB ]
DRAM: 0x40000000 [ 1,00 GB ]
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000
RNID : 77D4BD5B6E31587E48AA8978DE391F01
STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT
DA : USB : FULL-SPEED
DA : USB : Change Port Speed
PTFN : MediaTek DA USB VCOM (Android) (COM5)
MODE : PRELOADER PORT
PORT : 5
Boot done!
Patch Level : NRD90M
Display ID : DOOGEE-X53-Android7.0
Ver. CodeName : REL
Ver. Release : 7.0
Sec. Patch : 2019-02-05
Build Time : 1555508091
Product Model : X53
Product Brand : DOOGEE
Product Name : X53
Product Device : X53
Product Board : X53
Product Manfct : DOOGEE
Board Platform : mt6580
Product Info : zechin6580_we_n
USERDATA : PLAIN ( NOT encrypted )
Done!
Elapsed: 00:00:21
هل من حل على العلم لقد قمت بتحميل جميع الفلاشات هذا الهاتف عند طريق مواضيع الإخوة
