بحاجة الى OPPO A5 2020 Full EEMC DUMP (backup) خاص ب Medusa pro
- بادئ الموضوع xmobix
- تاريخ البدء
رد: بحاجة الى OPPO A5 2020 Full EEMC DUMP (backup) خاص ب Medusa pro
عن تجربة ميدوسا برو فاشل مع هواتف oppo عبر ISP
على حسب خبرتي المتواضعة . ميدوسا في التعامل مع اجهزة oppo الافضل انك تعمل على emmc بشكل مباشر
عكس بوكس UFI و EasyJTAG ممكن تنجح عملية انعاش الهاتف عبر ISP فقط
جرب كتابة EXT_CSD على ميدوسا
عن تجربة ميدوسا برو فاشل مع هواتف oppo عبر ISP
على حسب خبرتي المتواضعة . ميدوسا في التعامل مع اجهزة oppo الافضل انك تعمل على emmc بشكل مباشر
عكس بوكس UFI و EasyJTAG ممكن تنجح عملية انعاش الهاتف عبر ISP فقط
جرب كتابة EXT_CSD على ميدوسا
رد: بحاجة الى OPPO A5 2020 Full EEMC DUMP (backup) خاص ب Medusa pro
ا ماهي مشكلة الهاتف .....§§
https://www.dzgsm.com/vb/threads/82115-repair-boot-oppo-a5-via-medusa-pro/
اذا كنت تملك medusa pro ارفع لك ملف اصلاح boot
ا ماهي مشكلة الهاتف .....§§
https://www.dzgsm.com/vb/threads/82115-repair-boot-oppo-a5-via-medusa-pro/
اذا كنت تملك medusa pro ارفع لك ملف اصلاح boot
رد: بحاجة الى OPPO A5 2020 Full EEMC DUMP (backup) خاص ب Medusa pro
شكرا على الرد اخواني
نعم أملك Medusa Pro وقمت بكتابة Ext_csd لكن دون جدوى
الأن الهاتف متوقف على LOGO
كما قمت بتفليش boot1..boot2...userdata (rom1-rom2-rom3)) ...كدلك فلشت Firmware من recovery
فلشت C.74....A.13...لكن دون جدوى
للعلم الهاتف كان على الاصدار ِCPH1931_11_A.52 لكن لم أجد هدا الاصدار لأجربه من recovery.
ارحب بكل الحلول من الاخوة الأكارم.
شكرا على الرد اخواني
نعم أملك Medusa Pro وقمت بكتابة Ext_csd لكن دون جدوى
الأن الهاتف متوقف على LOGO
كما قمت بتفليش boot1..boot2...userdata (rom1-rom2-rom3)) ...كدلك فلشت Firmware من recovery
فلشت C.74....A.13...لكن دون جدوى
للعلم الهاتف كان على الاصدار ِCPH1931_11_A.52 لكن لم أجد هدا الاصدار لأجربه من recovery.
ارحب بكل الحلول من الاخوة الأكارم.
رد: بحاجة الى OPPO A5 2020 Full EEMC DUMP (backup) خاص ب Medusa pro
وهدا LOG الخاص بالعملية
للتدكير الهاتف كان مقفل بالباسوورد.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC hC8aP
Page size : 512 B
Block size : 512 B
Block count : 122142720
Size : 58.24 GB (59640.00 MB)
---------------------------------------------------------------
CID Info
CID : 90014A68433861503E0351B158DF96C9
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : hC8aP
Product revision : 0.3
Product serial number : (hex) 51B158DF
Manufacturing date : 09/2019
---------------------------------------------------------------
CSD Info
CSD : D02700328F5903FFFFFFFFEF8E400043
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 16384 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 30531584 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/hC8aP_05_03_2021_22_17_29.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.0; FW: 1.24.
P00: GPT (00000000, 00000028) 20 KB
P01: oppodycnvbk (00000028, 00005000) 10 MB
P02: oppostanvbk (00005028, 00005000) 10 MB
P03: modemst1 (0000A028, 00001000) 2048 KB
P04: modemst2 (0000B028, 00001000) 2048 KB
P05: opporeserve1 (0000C028, 00004000) 8 MB
P06: opporeserve2 (00010028, 00020000) 64 MB
P07: opporeserve3 (00030028, 00020000) 64 MB
P08: oppo_sec (00050028, 00005000) 10 MB
P09: xbl (00060000, 00001C00) 3584 KB
P10: xblbak (00061C00, 00001C00) 3584 KB
P11: xbl_config (00080000, 00000100) 128 KB
P12: xbl_configbak (00080100, 00000100) 128 KB
P13: tz (000A0000, 00002000) 4 MB
P14: tzbak (000C0000, 00002000) 4 MB
P15: rpm (000E0000, 00000400) 512 KB
P16: rpmbak (00100000, 00000400) 512 KB
P17: hyp (00120000, 00004000) 8 MB
P18: hypbak (00140000, 00004000) 8 MB
P19: boot (00144000, 00030000) 96 MB
P20: bootbak (00174000, 00030000) 96 MB
P21: cache (001A4000, 00080000) 256 MB
P22: keymaster (00240000, 00000400) 512 KB
P23: keymasterbak (00240400, 00000400) 512 KB
P24: cmnlib (00240800, 00000400) 512 KB
P25: cmnlib64 (00240C00, 00000400) 512 KB
P26: cmnlibbak (00241000, 00000400) 512 KB
P27: cmnlib64bak (00241400, 00000400) 512 KB
P28: mdtpsecapp (00241800, 00002000) 4 MB
P29: mdtpsecappbak (00243800, 00002000) 4 MB
P30: mdtp (00245800, 00010000) 32 MB
P31: mdtpbak (00255800, 00010000) 32 MB
P32: modem (00265800, 00080000) 256 MB
P33: dsp (002E5800, 00020000) 64 MB
P34: dspbak (00305800, 00020000) 64 MB
P35: abl (00325800, 00000800) 1024 KB
P36: ablbak (00326000, 00000800) 1024 KB
P37: ddr (00326800, 00000800) 1024 KB
P38: bluetooth (00327000, 00000800) 1024 KB
P39: bluetoothbak (00327800, 00000800) 1024 KB
P40: ssd (00340000, 00000010) 8 KB
P41: dtbo (00340010, 0000C000) 24 MB
P42: dtbobak (0034C010, 0000C000) 24 MB
P43: recovery (00360000, 00020000) 64 MB
P44: recoverybak (00380000, 00020000) 64 MB
P45: imagefv (003A0000, 00001000) 2048 KB
P46: imagefvbak (003A1000, 00001000) 2048 KB
P47: uefisecapp (003A2000, 00001000) 2048 KB
P48: uefisecappbak (003A3000, 00001000) 2048 KB
P49: persist (003A4000, 00010000) 32 MB
P50: metadata (003B4000, 00008000) 16 MB
P51: misc (003BC000, 00000800) 1024 KB
P52: keystore (003BC800, 00000400) 512 KB
P53: devcfg (003BCC00, 00000100) 128 KB
P54: devcfgbak (003BCD00, 00000100) 128 KB
P55: qupfw (003BCE00, 000000A0) 80 KB
P56: qupfwbak (003BCEA0, 000000A0) 80 KB
P57: frp (003BCF40, 00000400) 512 KB
P58: rawdump (003BD340, 00040000) 128 MB
P59: devinfo (00400000, 00000008) 4 KB
P60: dip (00400008, 00000800) 1024 KB
P61: apdp (00420000, 00000200) 256 KB
P62: spunvm (00420200, 00004000) 8 MB
P63: splash (00424200, 00010520) 32.64 MB
P64: limits (00440000, 00000008) 4 KB
P65: toolsfv (00440008, 00000800) 1024 KB
P66: logfs (00460000, 00004000) 8 MB
P67: cateloader (00464000, 00001000) 2048 KB
P68: logdump (00465000, 00020000) 64 MB
P69: vbmeta (004A0000, 00000080) 64 KB
P70: vbmetabak (004A0080, 00000080) 64 KB
P71: storsec (004A0100, 00000100) 128 KB
P72: multiimgoem (004A0200, 00000040) 32 KB
P73: multiimgqti (004A0240, 00000040) 32 KB
P74: secdata (004A0280, 00000032) 25 KB
P75: catefv (004A02B8, 00000400) 512 KB
P76: catecontentfv (004A06B8, 00000800) 1024 KB
P77: uefivarstore (004A0EB8, 00000400) 512 KB
P78: DRIVER (004C0000, 00010000) 32 MB
P79: fsg (004E0000, 00001000) 2048 KB
P80: fsc (00500000, 00000100) 128 KB
P81: system (00500100, 00C7E000) 6.246 GB
P82: vendor (0117E100, 00322000) 1604 MB
P83: odm (014A0100, 00080000) 256 MB
P84: userdata (01520100, 05F5BEDF) 47.68 GB
Backuping modemst1 partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/hC8aP_modemst1_0xa028_0x1000_05_03_2021_22_17_29.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.0; FW: 1.24.
Backuping modemst2 partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/hC8aP_modemst2_0xb028_0x1000_05_03_2021_22_17_29.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.0; FW: 1.24.
Backuping fsg partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/hC8aP_fsg_0x4e0000_0x1000_05_03_2021_22_17_29.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.0; FW: 1.24.
---------------------------------------------------------------
Searching Android build info...
Ok
Disk/Image size : 8f800000 bytes
Device sector size : 512 bytes
Partition offset : 5243136
Number of sectors : 13099008
Build ID : PKQ1.190714.001
Release ID : 9
Architecture ABI : arm64-v8a
Architecture ABI List : arm64-v8a,armeabi-v7a,armeabi
Build Description : trinket-user 9 PKQ1.190714.001 eng.root.20191011.004944 release-keys
---------------------------------------------------------------
Partition table has been found on device.
Partition table has been found on device.
Save to F:/OPPO/CPH1931 A5 2020/oppo A5 2020 backup FAHIM/vendor folder...
Reading partition vendor... Done.
Reading is finished.
SW: 2.2.0; FW: 1.24.
وهدا LOG الخاص بالعملية
للتدكير الهاتف كان مقفل بالباسوورد.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC hC8aP
Page size : 512 B
Block size : 512 B
Block count : 122142720
Size : 58.24 GB (59640.00 MB)
---------------------------------------------------------------
CID Info
CID : 90014A68433861503E0351B158DF96C9
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : hC8aP
Product revision : 0.3
Product serial number : (hex) 51B158DF
Manufacturing date : 09/2019
---------------------------------------------------------------
CSD Info
CSD : D02700328F5903FFFFFFFFEF8E400043
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 16384 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 30531584 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/hC8aP_05_03_2021_22_17_29.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.0; FW: 1.24.
P00: GPT (00000000, 00000028) 20 KB
P01: oppodycnvbk (00000028, 00005000) 10 MB
P02: oppostanvbk (00005028, 00005000) 10 MB
P03: modemst1 (0000A028, 00001000) 2048 KB
P04: modemst2 (0000B028, 00001000) 2048 KB
P05: opporeserve1 (0000C028, 00004000) 8 MB
P06: opporeserve2 (00010028, 00020000) 64 MB
P07: opporeserve3 (00030028, 00020000) 64 MB
P08: oppo_sec (00050028, 00005000) 10 MB
P09: xbl (00060000, 00001C00) 3584 KB
P10: xblbak (00061C00, 00001C00) 3584 KB
P11: xbl_config (00080000, 00000100) 128 KB
P12: xbl_configbak (00080100, 00000100) 128 KB
P13: tz (000A0000, 00002000) 4 MB
P14: tzbak (000C0000, 00002000) 4 MB
P15: rpm (000E0000, 00000400) 512 KB
P16: rpmbak (00100000, 00000400) 512 KB
P17: hyp (00120000, 00004000) 8 MB
P18: hypbak (00140000, 00004000) 8 MB
P19: boot (00144000, 00030000) 96 MB
P20: bootbak (00174000, 00030000) 96 MB
P21: cache (001A4000, 00080000) 256 MB
P22: keymaster (00240000, 00000400) 512 KB
P23: keymasterbak (00240400, 00000400) 512 KB
P24: cmnlib (00240800, 00000400) 512 KB
P25: cmnlib64 (00240C00, 00000400) 512 KB
P26: cmnlibbak (00241000, 00000400) 512 KB
P27: cmnlib64bak (00241400, 00000400) 512 KB
P28: mdtpsecapp (00241800, 00002000) 4 MB
P29: mdtpsecappbak (00243800, 00002000) 4 MB
P30: mdtp (00245800, 00010000) 32 MB
P31: mdtpbak (00255800, 00010000) 32 MB
P32: modem (00265800, 00080000) 256 MB
P33: dsp (002E5800, 00020000) 64 MB
P34: dspbak (00305800, 00020000) 64 MB
P35: abl (00325800, 00000800) 1024 KB
P36: ablbak (00326000, 00000800) 1024 KB
P37: ddr (00326800, 00000800) 1024 KB
P38: bluetooth (00327000, 00000800) 1024 KB
P39: bluetoothbak (00327800, 00000800) 1024 KB
P40: ssd (00340000, 00000010) 8 KB
P41: dtbo (00340010, 0000C000) 24 MB
P42: dtbobak (0034C010, 0000C000) 24 MB
P43: recovery (00360000, 00020000) 64 MB
P44: recoverybak (00380000, 00020000) 64 MB
P45: imagefv (003A0000, 00001000) 2048 KB
P46: imagefvbak (003A1000, 00001000) 2048 KB
P47: uefisecapp (003A2000, 00001000) 2048 KB
P48: uefisecappbak (003A3000, 00001000) 2048 KB
P49: persist (003A4000, 00010000) 32 MB
P50: metadata (003B4000, 00008000) 16 MB
P51: misc (003BC000, 00000800) 1024 KB
P52: keystore (003BC800, 00000400) 512 KB
P53: devcfg (003BCC00, 00000100) 128 KB
P54: devcfgbak (003BCD00, 00000100) 128 KB
P55: qupfw (003BCE00, 000000A0) 80 KB
P56: qupfwbak (003BCEA0, 000000A0) 80 KB
P57: frp (003BCF40, 00000400) 512 KB
P58: rawdump (003BD340, 00040000) 128 MB
P59: devinfo (00400000, 00000008) 4 KB
P60: dip (00400008, 00000800) 1024 KB
P61: apdp (00420000, 00000200) 256 KB
P62: spunvm (00420200, 00004000) 8 MB
P63: splash (00424200, 00010520) 32.64 MB
P64: limits (00440000, 00000008) 4 KB
P65: toolsfv (00440008, 00000800) 1024 KB
P66: logfs (00460000, 00004000) 8 MB
P67: cateloader (00464000, 00001000) 2048 KB
P68: logdump (00465000, 00020000) 64 MB
P69: vbmeta (004A0000, 00000080) 64 KB
P70: vbmetabak (004A0080, 00000080) 64 KB
P71: storsec (004A0100, 00000100) 128 KB
P72: multiimgoem (004A0200, 00000040) 32 KB
P73: multiimgqti (004A0240, 00000040) 32 KB
P74: secdata (004A0280, 00000032) 25 KB
P75: catefv (004A02B8, 00000400) 512 KB
P76: catecontentfv (004A06B8, 00000800) 1024 KB
P77: uefivarstore (004A0EB8, 00000400) 512 KB
P78: DRIVER (004C0000, 00010000) 32 MB
P79: fsg (004E0000, 00001000) 2048 KB
P80: fsc (00500000, 00000100) 128 KB
P81: system (00500100, 00C7E000) 6.246 GB
P82: vendor (0117E100, 00322000) 1604 MB
P83: odm (014A0100, 00080000) 256 MB
P84: userdata (01520100, 05F5BEDF) 47.68 GB
Backuping modemst1 partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/hC8aP_modemst1_0xa028_0x1000_05_03_2021_22_17_29.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.0; FW: 1.24.
Backuping modemst2 partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/hC8aP_modemst2_0xb028_0x1000_05_03_2021_22_17_29.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.0; FW: 1.24.
Backuping fsg partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/hC8aP_fsg_0x4e0000_0x1000_05_03_2021_22_17_29.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.0; FW: 1.24.
---------------------------------------------------------------
Searching Android build info...
Ok
Disk/Image size : 8f800000 bytes
Device sector size : 512 bytes
Partition offset : 5243136
Number of sectors : 13099008
Build ID : PKQ1.190714.001
Release ID : 9
Architecture ABI : arm64-v8a
Architecture ABI List : arm64-v8a,armeabi-v7a,armeabi
Build Description : trinket-user 9 PKQ1.190714.001 eng.root.20191011.004944 release-keys
---------------------------------------------------------------
Partition table has been found on device.
Partition table has been found on device.
Save to F:/OPPO/CPH1931 A5 2020/oppo A5 2020 backup FAHIM/vendor folder...
Reading partition vendor... Done.
Reading is finished.
SW: 2.2.0; FW: 1.24.
رد: بحاجة الى OPPO A5 2020 Full EEMC DUMP (backup) خاص ب Medusa pro
اعمل نسخة احتياطية للملفات المهمة
سارفع لك ملفات مسحوبة عن طريق medusa pro +srf repaire
اعمل نسخة احتياطية للملفات المهمة
سارفع لك ملفات مسحوبة عن طريق medusa pro +srf repaire
رد: بحاجة الى OPPO A5 2020 Full EEMC DUMP (backup) خاص ب Medusa pro
جرب اولا ملف الاصلاح srf
https://www.mediafire.com/file/dgq70wqpheo6mjh/OPPO+A5.rar/file
password على الخاص
جرب اولا ملف الاصلاح srf
https://www.mediafire.com/file/dgq70wqpheo6mjh/OPPO+A5.rar/file
password على الخاص
رد: بحاجة الى OPPO A5 2020 Full EEMC DUMP (backup) خاص ب Medusa pro
لم الاحظ ذلك ....هههه:bangin:
ان شاء الله غدا نشوفلك حل
لم الاحظ ذلك ....هههه:bangin:
ان شاء الله غدا نشوفلك حل
رد: بحاجة الى OPPO A5 2020 Full EEMC DUMP (backup) خاص ب Medusa pro
ممكن حل الهاتف كان به كود استعملت بوكس جيتاق مع العلم انني حدفت كود من قبل لكن هدا الهاتف اصبح لا يعمل لكن عند تركيب الشاحن تسمع هزاز يعمل ممكن الحل مستعجل oppo a5 cph 1931
ممكن حل الهاتف كان به كود استعملت بوكس جيتاق مع العلم انني حدفت كود من قبل لكن هدا الهاتف اصبح لا يعمل لكن عند تركيب الشاحن تسمع هزاز يعمل ممكن الحل مستعجل oppo a5 cph 1931