رد: ممكن dump لجهاز b1s
نفس المشكل
Operation : Write Flash [ v2.21 ]
Repartition : Enabled
Flash Verify : Disabled
Reg.Pre-Erase : Enabled
Verify HW/SW : Enabled
SData Backup : Disabled
Safe UserData : Disabled
Flash Format : Disabled
Files :12
[FL] : Set : preloader.bin
[FL] : Set : lk.bin
[FL] : Set : lk2.bin
[FL] : Set : boot.bin
[FL] : Set : recovery.bin
[FL] : Set : logo.bin
[FL] : Set : tee1.bin
[FL] : Set : tee2.bin
[FL] : Set : nvdata.bin
[FL] : Set : secro.bin
[FL] : Set : system.bin
[FL] : Set : cache.bin
[FL] : Total size : 0x658DC09C [ 1,59 GB ]
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM (Android) (COM9)
MODE : PRELOADER PORT
PORT : 9
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BROM|BL : 0xFF|0x01
BROM : PRELOADER PORT
MODE : 0_base : BASE_v2012 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 5400017030373232B601013815857909
DAInf: 4 : 2 : 156
DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info
EMMC: 7001005432323730380101B69798515
EMMC: VEN : KINGSTON | OEM : 01 | DEV : T22708
EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0x1C8000000 [ 7,13 GB ]
SRAM: 0x00020000 [ 128,00 KB ]
DRAM: 0x40000000 [ 1,00 GB ]
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000
RNID : 50719BFAFBA19737AC427BB76EFBEC5A
STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT
DA : USB : HIGH-SPEED
Boot done!
[FL] : HW verification passed!
SEC_DL : False (CUST)
SEC_DL : SECURE USB DL DISABLED
SEC_ID : 0x35464646304237304435444533464335
[FL] : Pre-Erase
Erase : 0x0000000000000000 : 0x0000000000400000
Erase : 0x0000000000000000 : 0x0000000000080000
Erase : 0x0000000000380000 : 0x0000000000500000
Erase : 0x0000000001C80000 : 0x0000000004380000
Erase : 0x0000000018000000 : 0x00000001B8F80000
ERR : 0x00000BE0
ERR : DA : INVALID RANGE
ERR : 0x00000000|0x00000000
Error : Flashing failed!
>>> Seems as something wrong with device! Check battery charge and device state!
Reconnect Power/Cable!
