مساعدة مشكل ERROR MODE مع هاتف Huawei Y9 2019

cst_repair

:: عضو مميز ::
إنضم
2 يونيو 2013
المشاركات
280
مستوى التفاعل
370
النقاط
63
الإقامة
الجزائر الحبيبة
رد: مشكل ERROR MODE مع هاتف Huawei Y9 2019

تم عمل update emmc firmware . اي تمت كتابة فريم وير للذاكرة. يعني تم تصفير الحماية rpmb

حسب معلوماتي: عند عمل update emmc firmware يرجع rpmb clean


كود:
[left][b][size=3]model settings:
Interface : Emmc
voltage   : 1.8v
bus mode  : 1 bit
bus speed : Auto

connecting...
Device       : Samsung emmc agnd3r
page size    : 512 b
block size   : 512 b
block count  : 30535680
size         : 14.56 gb (14910.00 mb)
---------------------------------------------------------------
cid info

cid                   : 15010041474e44335201b938b048c131
manufacturer id       : 0x15
device/bga            : Bga (discrete embedded)
oem/application id    : 0x00
product name          : Agnd3r
product revision      : 0.1
product serial number : (hex) b938b048
manufacturing date    : 12/2014
---------------------------------------------------------------
csd info

csd                   : D02701320f5903fff6dbffef8e40400d
csd structure         : Csd version no. 1.2
spec version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                        4.51, 5.0, 5.01, 5.1
data read access time1: 15 ms
tran speed            : 26 mhz
read block length     : 512 bytes
wp group enable       : Yes
perm_write_protect    : No
tmp_write_protect     : No
---------------------------------------------------------------
extcsd info

revision 1.7 (for mmc v5.0, v5.01)
erase block size      : 512 kbytes
boot1 size            : 4096 kbytes
boot2 size            : 4096 kbytes
rpmb size             : 4096 kbytes

partition config      : (0x48) 01001000
boot partition enable : Boot partition 1
(bus width = 4bit)
boot ack              : Boot acknowledge sent during boot operation bit

boot bus conditions   : (0x01) 00000001
boot bus width        : X4 (sdr/ddr) bus width in boot operation mode
reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
boot mode             : Use single data rate + backward compatible timings in boot operation (default)

rst_n function        : (0x00) rst_n signal is temporary disabled (default)

partitioning support  : Device supports partitioning features
enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7626752 kbytes
partitions attribute  : 0x0
part setting completed: 0x0
gp partition 1 size   : 0 b
gp partition 2 size   : 0 b
gp partition 3 size   : 0 b
gp partition 4 size   : 0 b
enhanced area size    : (0x0) 0 b
enhanced area start   : (0x0) 0 b

backup ext_csd saved to file f:/medusa pro software/ext_csd backups/agnd3r_29_01_2021_15_20_08.bin.
Connect successful.
---------------------------------------------------------------
sw: 2.1.9; fw: 1.24.
P00: Gpt              (00000000, 00002000)	4 mb
p01: Private          (00002000, 00000200)	256 kb
p02: Modem            (00002200, 00000100)	128 kb
p03: Bat_model        (00002300, 00000010)	8 kb
p04: Rec_priv         (00002310, 00000010)	8 kb
p05: Pro_info         (00002320, 00000200)	256 kb

---------------------------------------------------------------
searching android build info...
Not found
---------------------------------------------------------------
downloaded file c:/program files (x86)/medusa pro software/firmwarefolder/klmag2gend-b031_agnd3r_vnc0_564e4330140314200100710030070315_7_1_r1_04_13_44_by_babak_nuri.bin.

Writing emmc firmware from file: F:/medusa pro software/emmc_firmwares/[color="#0000ff"]klmcg8gend-b031/klmcg8gend-b031_fw.bin...done[/color].
[color="#0000ff"]finalizing...done.[/color]
[color="#0000ff"]write cid succesfully completed[/color].
Disconnected.
[color="#0000ff"]emmc writing firmware done[/color].
Sw: 2.1.9; fw: 1.24.

Please disconnect battery and usb cable.

Model settings:
Interface : Emmc
voltage   : 1.8v
bus mode  : 1 bit
bus speed : Auto

connecting...
Device       : Samsung emmc cgnd3r
page size    : 512 b
block size   : 512 b
block count  : 30535680
size         : 14.56 gb (14910.00 mb)
---------------------------------------------------------------
cid info

cid                   : 15010043474e44335201446eee0b829d
manufacturer id       : 0x15
device/bga            : Bga (discrete embedded)
oem/application id    : 0x00
product name          : Cgnd3r
full name one from    : Klmcg8gend-b031
product revision      : 0.1
product serial number : (hex) 446eee0b
manufacturing date    : 08/2015
---------------------------------------------------------------
csd info

csd                   : D02701320f5903fff6dbffef8e40400d
csd structure         : Csd version no. 1.2
spec version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                        4.51, 5.0, 5.01, 5.1
data read access time1: 15 ms
tran speed            : 26 mhz
read block length     : 512 bytes
wp group enable       : Yes
perm_write_protect    : No
tmp_write_protect     : No
---------------------------------------------------------------
extcsd info

revision 1.7 (for mmc v5.0, v5.01)
erase block size      : 512 kbytes
boot1 size            : 4096 kbytes
boot2 size            : 4096 kbytes
rpmb size             : 4096 kbytes

partition config      : (0x00) 00000000
boot partition enable : Device not boot enabled (default)
(bus width = 1bit)
boot ack              : No boot acknowledge sent (default)

boot bus conditions   : (0x00) 00000000
boot bus width        : X1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
boot mode             : Use single data rate + backward compatible timings in boot operation (default)

rst_n function        : (0x00) rst_n signal is temporary disabled (default)

partitioning support  : Device supports partitioning features
enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7626752 kbytes
partitions attribute  : 0x0
part setting completed: 0x0
gp partition 1 size   : 0 b
gp partition 2 size   : 0 b
gp partition 3 size   : 0 b
gp partition 4 size   : 0 b
enhanced area size    : (0x0) 0 b
enhanced area start   : (0x0) 0 b

backup ext_csd saved to file f:/medusa pro software/ext_csd backups/cgnd3r_29_01_2021_15_23_24.bin.
Connect successful.
---------------------------------------------------------------
sw: 2.1.9; fw: 1.24.

---------------------------------------------------------------
searching android build info...
Not found
---------------------------------------------------------------
smart report not valid!
Device_life_time_est_typ_b    : 0% - 10% device life time used
device_life_time_est_typ_a    : 0% - 10% device life time used
pre_eol_info                  : Normal
sw: 2.1.9; fw: 1.24.[/size][/b][/left]

هدا يعتمد على تفسيمات الداكرة و كيف هي مقسمة
منطقة rpmb تحمل بيانات المصنع ولا يمكن حتى الولوج اليها في بعض التفسيمات والله اعلم
 
أعلى