oppo a1k بيه قفل

F

fouad16

عضو أساسي
إنضم
2 نوفمبر 2014
المشاركات
227
مستوى التفاعل
106
النقاط
43
oppo a1k بيه قفل واريد فك القفل بدون فقدان البياناتمع العلم املك easy jitag plus
 
cst_repair

cst_repair

:: عضو مميز ::
إنضم
2 يونيو 2013
المشاركات
280
مستوى التفاعل
370
النقاط
63
الإقامة
الجزائر الحبيبة
رد: oppo a1k بيه قفل

fouad16 قال:
oppo a1k بيه قفل واريد فك القفل بدون فقدان البياناتمع العلم املك easy jitag plus
أنقر للتوسيع...

يمكن فتح القفل دون فقدان للبيانات سهولة باستعمال الايزي جيثاغ بليس

هدا بكتابة البارتيشن المرفق من خلال التقسيم param
 

المرفقات

  • A1k_Factory reset keep Media.rar
    267 بايت · المشاهدات: 12
.:: Mohamed Gsm ::.

.:: Mohamed Gsm ::.

:: مراقب البوكسات والبرامج المحمية ::
إنضم
2 أبريل 2017
المشاركات
5,098
مستوى التفاعل
5,328
النقاط
113
الإقامة
سيدي بلعباس
رد: oppo a1k بيه قفل

[video=youtube;YX9DCuQUJ5Q]https://www.youtube.com/watch?v=YX9DCuQUJ5Q&t=2s[/video]
 
F

fouad16

عضو أساسي
إنضم
2 نوفمبر 2014
المشاركات
227
مستوى التفاعل
106
النقاط
43
رد: oppo a1k بيه قفل

الشكر لكم لقد تم من دونفقدان البيانات باستعمال emmc file manager easy jitag

خاصية oppo password reset
Z3X EasyJtag EMMC File Manager v 1.18 at 29/06/2020 Started..
Box API Version: 3401
FS Driver Version: 29062020
SQLite Version: 3.32.0
FSCK Engine Version: 29062020
ESE DB Version: 29062020
System Util Version: 29062020
System: Windows NT 6.1 (Build 7601, Service Pack 1) / 32 BIT
CPU: Intel(R) Core(TM) i5-4590S CPU @ 3.00GHz
Total RAM: 3,42 GB
Telegram Support: https://t.me/z3xefm
FRP Apps: http://efm.easy-jtag.com/frp/

Z3X Card Serial: AA46E2DB
EasyJtag Plus Box Found at: COM94
EasyJtag Plus Box Firmware: 2.53.1

Source: EasyJtag Port [EMMC/SD/MMC]
Generation: GPT [QC/SAMS/BCM/INTEL/MTK]
Box Voltage set to: 2800 mV
Scanner Thread Created..

Config: 1011111111101111
Setup HiPower CLK: OFF
Disable HS Timing: TRUE
Connecting To EasyJtag Plus Box: 2800mV/1MHz/1BIT
EasyJtag Plus Box Found! Result: 0/OK
CMD Pullup Level: 2099 mV
CMD Active Level: 2540 mV
EasyJtag Plus S/N: E48F82366B9EF189
EasyJtag Plus Box FirmWare: 2.53

Box Bus Width = 1 BIT
Box Hardware = EasyJtag 2nd Generation

Search EMMC Chip...

EMMC NOT Found! Error: -1/CMD_TOUT_ERR

Scanner Thread Terminated
Elapsed: 00:00:01:220
Found 0 Partition(s)..

Search Partitions Fail..
Check EMMC or Run Pool Test..

Source: EasyJtag Port [EMMC/SD/MMC]
Generation: GPT [QC/SAMS/BCM/INTEL/MTK]
Box Voltage set to: 2800 mV
Scanner Thread Created..

Config: 1011111111101111
Setup HiPower CLK: OFF
Disable HS Timing: TRUE
Connecting To EasyJtag Plus Box: 2800mV/1MHz/1BIT
EasyJtag Plus Box Found! Result: 0/OK
CMD Pullup Level: 2103 mV
CMD Active Level: 2542 mV
EasyJtag Plus S/N: E48F82366B9EF189
EasyJtag Plus Box FirmWare: 2.53

Box Bus Width = 1 BIT
Box Hardware = EasyJtag 2nd Generation

Search EMMC Chip...

EMMC NOT Found! Error: -1/CMD_TOUT_ERR

Scanner Thread Terminated
Elapsed: 00:00:01:460
Found 0 Partition(s)..

Search Partitions Fail..
Check EMMC or Run Pool Test..

Source: EasyJtag Port [EMMC/SD/MMC]
Generation: GPT [QC/SAMS/BCM/INTEL/MTK]
Box Voltage set to: 2800 mV
Scanner Thread Created..

Config: 1011111111101111
Setup HiPower CLK: OFF
Disable HS Timing: TRUE
Connecting To EasyJtag Plus Box: 2800mV/1MHz/1BIT
EasyJtag Plus Box Found! Result: 0/OK
CMD Pullup Level: 2105 mV
CMD Active Level: 2265 mV
EasyJtag Plus S/N: E48F82366B9EF189
EasyJtag Plus Box FirmWare: 2.53

Box Bus Width = 1 BIT
Box Hardware = EasyJtag 2nd Generation

Search EMMC Chip...

EMMC NOT Found! Error: -1/CMD_TOUT_ERR

Scanner Thread Terminated
Elapsed: 00:00:01:450
Found 0 Partition(s)..

Search Partitions Fail..
Check EMMC or Run Pool Test..

Source: EasyJtag Port [EMMC/SD/MMC]
Generation: GPT [QC/SAMS/BCM/INTEL/MTK]
Box Voltage set to: 2800 mV
Scanner Thread Created..

Config: 1011111111101111
Setup HiPower CLK: OFF
Disable HS Timing: TRUE
Connecting To EasyJtag Plus Box: 2800mV/1MHz/1BIT
EasyJtag Plus Box Found! Result: 0/OK
CMD Pullup Level: 2105 mV
CMD Active Level: 2269 mV
EasyJtag Plus S/N: E48F82366B9EF189
EasyJtag Plus Box FirmWare: 2.53

Box Bus Width = 1 BIT
Box Hardware = EasyJtag 2nd Generation

Search EMMC Chip...

EMMC NOT Found! Error: -1/CMD_TOUT_ERR

Scanner Thread Terminated
Elapsed: 00:00:01:430
Found 0 Partition(s)..

Search Partitions Fail..
Check EMMC or Run Pool Test..

Source: EasyJtag Port [EMMC/SD/MMC]
Generation: GPT [QC/SAMS/BCM/INTEL/MTK]
Box Voltage set to: 2800 mV
Scanner Thread Created..

Config: 1011111111101111
Setup HiPower CLK: OFF
Disable HS Timing: TRUE
Connecting To EasyJtag Plus Box: 2800mV/1MHz/1BIT
EasyJtag Plus Box Found! Result: 0/OK
CMD Pullup Level: 48 mV
CMD Active Level: 140 mV
EasyJtag Plus S/N: E48F82366B9EF189
EasyJtag Plus Box FirmWare: 2.53

Box Bus Width = 1 BIT
Box Hardware = EasyJtag 2nd Generation

Search EMMC Chip...

EMMC NOT Found! Error: -1/CMD_TOUT_ERR

Scanner Thread Terminated
Elapsed: 00:00:01:440
Found 0 Partition(s)..

Search Partitions Fail..
Check EMMC or Run Pool Test..

Source: EasyJtag Port [EMMC/SD/MMC]
Generation: GPT [QC/SAMS/BCM/INTEL/MTK]
Box Voltage set to: 2800 mV
Scanner Thread Created..

Config: 1011111111101111
Setup HiPower CLK: OFF
Disable HS Timing: TRUE
Connecting To EasyJtag Plus Box: 2800mV/1MHz/1BIT
EasyJtag Plus Box Found! Result: 0/OK
CMD Pullup Level: 2114 mV
CMD Active Level: 2269 mV
EasyJtag Plus S/N: E48F82366B9EF189
EasyJtag Plus Box FirmWare: 2.53

Box Bus Width = 1 BIT
Box Hardware = EasyJtag 2nd Generation

Search EMMC Chip...

EMMC Chip Found! 0/OK
EMMC CID: 150100514436334D420332D5CE7216B5
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC VENDOR: SAMSUNG
EMMC NAME: QD63MB
EMMC SERIAL: 32D5CE72
EMMC REVISION: 03
EMMC ROM1 Size: 61071360 Block(s)/29820 MB
EMMC ROM2/3 Size: 8192 Block(s)/4096 KB
EMMC RPMB Size: 32768 Block(s)/16384 KB
EMMC RPMB Counter: 2144
EMMC RPMB Answer: 0/OK
Switch To ROM1 Part: 0/OK

EMMC REV: 1.8 (for MMC v5.1)
EMMC VER: MMC 5.1
EMMC DEV Life Time: 0x01 -> Normal
EMMC MLC Life Time: 0x01 -> 0% - 10% Life Time Used
EMMC SLC Life Time: 0x01 -> 0% - 10% Life Time Used
EMMC Boot Config: 0x48/0x02/0x01
ExtCSD Automatically Saved..

Scanning Data From EMMC. Please wait..

Scanning GUID Partition Table from ROM1
GUID Partition Table is Found. Max Parts: 128
GPT: GPT [000000000000 - 000000004400] Size: 17,00 KB
GPT: BOOT_PARA [000000008000 - 000000100000] Size: 1,00 MB
GPT: RECOVERY [000000108000 - 000002000000] Size: 32,00 MB
GPT: PARA [000002108000 - 000000080000] Size: 512,00 KB
GPT: OPPORESERVE1 [000002188000 - 000000800000] Size: 8,00 MB
GPT: OPPORESERVE2 [000002988000 - 000004000000] Size: 64,00 MB
GPT: OPPORESERVE3 [000006988000 - 000004000000] Size: 64,00 MB
GPT: OPPO_CUSTOM [00000A988000 - 000000100000] Size: 1,00 MB
GPT: EXPDB [00000AA88000 - 000001400000] Size: 20,00 MB
GPT: FRP [00000BE88000 - 000000100000] Size: 1,00 MB
GPT: VBMETA [00000BF88000 - 000000800000] Size: 8,00 MB
GPT: NVCFG [00000C788000 - 000002000000] Size: 32,00 MB
GPT: NVDATA [00000E788000 - 000004000000] Size: 64,00 MB
GPT: METADATA [000012788000 - 000002000000] Size: 32,00 MB
GPT: PROTECT1 [000014788000 - 000000800000] Size: 8,00 MB
GPT: PROTECT2 [000014F88000 - 000000878000] Size: 8,47 MB
GPT: SECCFG [000015800000 - 000000800000] Size: 8,00 MB
GPT: PERSIST [000016000000 - 000003000000] Size: 48,00 MB
GPT: SEC1 [000019000000 - 000000200000] Size: 2,00 MB
GPT: PROINFO [000019200000 - 000000300000] Size: 3,00 MB
GPT: MD1IMG [000019500000 - 000006400000] Size: 100,00 MB
GPT: SPMFW [00001F900000 - 000000100000] Size: 1,00 MB
GPT: SCP1 [00001FA00000 - 000000100000] Size: 1,00 MB
GPT: SCP2 [00001FB00000 - 000000100000] Size: 1,00 MB
GPT: SSPM_1 [00001FC00000 - 000000100000] Size: 1,00 MB
GPT: SSPM_2 [00001FD00000 - 000000100000] Size: 1,00 MB
GPT: GZ1 [00001FE00000 - 000001000000] Size: 16,00 MB
GPT: GZ2 [000020E00000 - 000001000000] Size: 16,00 MB
GPT: NVRAM [000021E00000 - 000004000000] Size: 64,00 MB
GPT: LK [000025E00000 - 000000100000] Size: 1,00 MB
GPT: LK2 [000025F00000 - 000000100000] Size: 1,00 MB
GPT: BOOT [000026000000 - 000002000000] Size: 32,00 MB
GPT: LOGO [000028000000 - 000001000000] Size: 16,00 MB
GPT: DTBO [000029000000 - 000001000000] Size: 16,00 MB
GPT: TEE1 [00002A000000 - 000000500000] Size: 5,00 MB
GPT: TEE2 [00002A500000 - 000000B00000] Size: 11,00 MB
GPT: ODM [00002B000000 - 000010000000] Size: 256,00 MB
GPT: VENDOR [00003B000000 - 000039800000] Size: 920,00 MB
GPT: SYSTEM [000074800000 - 00012C000000] Size: 4,69 GB
GPT: CACHE [0001A0800000 - 00001B000000] Size: 432,00 MB
GPT: USERDATA [0001BB800000 - 0005888FBE00] Size: 22,13 GB
GPT: OTP [0007440FBE00 - 000002B00000] Size: 43,00 MB
GPT: FLASHINFO [000746BFBE00 - 000001000000] Size: 16,00 MB
GPT: BACKUP_GPT [000747BFBE00 - 000000004200] Size: 16,50 KB
Reading Table Completed
Scanning GUID Partition Table from ROM2
GPT Signature Not Found. Break..
Scanning GUID Partition Table from ROM3
GPT Signature Not Found. Break..

Partition #9 mount as [/mnt/vendor/opporeserve] -> 64,00 MB
Partition #15 mount as [/mnt/vendor/nvcfg] -> 32,00 MB
Partition #16 mount as [/mnt/vendor/nvdata] -> 64,00 MB
Partition #18 mount as [/mnt/vendor/protect_f] -> 8,00 MB
Partition #19 mount as [/mnt/vendor/protect_s] -> 8,47 MB
Partition #21 mount as [/mnt/vendor/persist] -> 48,00 MB
Partition #40 mount as [/dev_40] -> 256,00 MB
Partition #41 mount as [/dev_41] -> 920,00 MB
Partition #42 mount as [/dev_42] -> 4,69 GB
Partition #43 mount as [/cache] -> 432,00 MB
Partition #44 mount as [/data] -> 22,13 GB

EmptyCheck:
EMPTY -> #4 - [BOOT_PARA]
EMPTY -> #9 - [OPPORESERVE3]
EMPTY -> #11 - [EXPDB]

Error Reading Sector: 605248, Count: 512, Err: -4/R_DATA_CRC_ERR
Try Again #1
EMPTY -> #16 - [METADATA]
EMPTY -> #21 - [SEC1]
EMPTY -> #29 - [GZ1]
EMPTY -> #30 - [GZ2]
EMPTY -> #44 - [OTP]
EmptyCheck: Done

=================================
Warning! Device Blocked by FRP
For Reset FRP Try to Tools Tab
Press Reset FRP Button
Partition #13 -> FRP
=================================

Android Info:
Platform = mt6765

Android Info:
Vendor = OPPO
CPU ABI = arm64-v8a
Android Version = 9
Security Patch = 2019-06-05

Android Info:
Brand = OPPO
Device = OP486C
Model = CPH1923
Product = CPH1923
Firm Version = CPH1923EX_11_A.17
Inc. Version = 1559382133
Firm Date = Sat Jun 1 17:42:13 CST 2019
OPPO Name = OPPO A1k

Error Reading Sector: 14544904, Count: 8, Err: -3/R_DATA_TOUT_ERR
Try Again #1

Scanner Thread Terminated
Elapsed: 00:01:01:601
Found 47 Partition(s)..
Scan Done. Init Main Engine...

Resetting EasyJtag Box. Wait..
CMD Pullup Level: 2113 mV
CMD Active Level: 2268 mV
Reader Engine Initialized.. 0/OK
Source: EasyJtag Port [EMMC/SD/MMC]
Generation: GPT [QC/SAMS/BCM/INTEL/MTK]
Bus Mode: 1BIT
Operation Done: [Init Engine], Elapsed: 00:00:01:560

Source: EasyJtag Port [EMMC/SD/MMC]
Generation: GPT [QC/SAMS/BCM/INTEL/MTK]
Box Voltage set to: 2800 mV
Scanner Thread Created..

Config: 1011111111101111
Setup HiPower CLK: OFF
Disable HS Timing: TRUE
Connecting To EasyJtag Plus Box: 2800mV/1MHz/1BIT
EasyJtag Plus Box Found! Result: 0/OK
CMD Pullup Level: 2111 mV
CMD Active Level: 2539 mV
EasyJtag Plus S/N: E48F82366B9EF189
EasyJtag Plus Box FirmWare: 2.53

Box Bus Width = 1 BIT
Box Hardware = EasyJtag 2nd Generation

Search EMMC Chip...

EMMC Chip Found! 0/OK
EMMC CID: 150100514436334D420332D5CE7216B5
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC VENDOR: SAMSUNG
EMMC NAME: QD63MB
EMMC SERIAL: 32D5CE72
EMMC REVISION: 03
EMMC ROM1 Size: 61071360 Block(s)/29820 MB
EMMC ROM2/3 Size: 8192 Block(s)/4096 KB
EMMC RPMB Size: 32768 Block(s)/16384 KB
EMMC RPMB Counter: 2144
EMMC RPMB Answer: 0/OK
Switch To ROM1 Part: 0/OK

EMMC REV: 1.8 (for MMC v5.1)
EMMC VER: MMC 5.1
EMMC DEV Life Time: 0x01 -> Normal
EMMC MLC Life Time: 0x01 -> 0% - 10% Life Time Used
EMMC SLC Life Time: 0x01 -> 0% - 10% Life Time Used
EMMC Boot Config: 0x48/0x02/0x01
ExtCSD Automatically Saved..

Scanning Data From EMMC. Please wait..

Scanning GUID Partition Table from ROM1
GUID Partition Table is Found. Max Parts: 128
GPT: GPT [000000000000 - 000000004400] Size: 17,00 KB
GPT: BOOT_PARA [000000008000 - 000000100000] Size: 1,00 MB
GPT: RECOVERY [000000108000 - 000002000000] Size: 32,00 MB
GPT: PARA [000002108000 - 000000080000] Size: 512,00 KB
GPT: OPPORESERVE1 [000002188000 - 000000800000] Size: 8,00 MB
GPT: OPPORESERVE2 [000002988000 - 000004000000] Size: 64,00 MB
GPT: OPPORESERVE3 [000006988000 - 000004000000] Size: 64,00 MB
GPT: OPPO_CUSTOM [00000A988000 - 000000100000] Size: 1,00 MB
GPT: EXPDB [00000AA88000 - 000001400000] Size: 20,00 MB
GPT: FRP [00000BE88000 - 000000100000] Size: 1,00 MB
GPT: VBMETA [00000BF88000 - 000000800000] Size: 8,00 MB
GPT: NVCFG [00000C788000 - 000002000000] Size: 32,00 MB
GPT: NVDATA [00000E788000 - 000004000000] Size: 64,00 MB
GPT: METADATA [000012788000 - 000002000000] Size: 32,00 MB
GPT: PROTECT1 [000014788000 - 000000800000] Size: 8,00 MB
GPT: PROTECT2 [000014F88000 - 000000878000] Size: 8,47 MB
GPT: SECCFG [000015800000 - 000000800000] Size: 8,00 MB
GPT: PERSIST [000016000000 - 000003000000] Size: 48,00 MB
GPT: SEC1 [000019000000 - 000000200000] Size: 2,00 MB
GPT: PROINFO [000019200000 - 000000300000] Size: 3,00 MB
GPT: MD1IMG [000019500000 - 000006400000] Size: 100,00 MB
GPT: SPMFW [00001F900000 - 000000100000] Size: 1,00 MB
GPT: SCP1 [00001FA00000 - 000000100000] Size: 1,00 MB
GPT: SCP2 [00001FB00000 - 000000100000] Size: 1,00 MB
GPT: SSPM_1 [00001FC00000 - 000000100000] Size: 1,00 MB
GPT: SSPM_2 [00001FD00000 - 000000100000] Size: 1,00 MB
GPT: GZ1 [00001FE00000 - 000001000000] Size: 16,00 MB
GPT: GZ2 [000020E00000 - 000001000000] Size: 16,00 MB
GPT: NVRAM [000021E00000 - 000004000000] Size: 64,00 MB
GPT: LK [000025E00000 - 000000100000] Size: 1,00 MB
GPT: LK2 [000025F00000 - 000000100000] Size: 1,00 MB
GPT: BOOT [000026000000 - 000002000000] Size: 32,00 MB
GPT: LOGO [000028000000 - 000001000000] Size: 16,00 MB
GPT: DTBO [000029000000 - 000001000000] Size: 16,00 MB
GPT: TEE1 [00002A000000 - 000000500000] Size: 5,00 MB
GPT: TEE2 [00002A500000 - 000000B00000] Size: 11,00 MB
GPT: ODM [00002B000000 - 000010000000] Size: 256,00 MB
GPT: VENDOR [00003B000000 - 000039800000] Size: 920,00 MB
GPT: SYSTEM [000074800000 - 00012C000000] Size: 4,69 GB
GPT: CACHE [0001A0800000 - 00001B000000] Size: 432,00 MB
GPT: USERDATA [0001BB800000 - 0005888FBE00] Size: 22,13 GB
GPT: OTP [0007440FBE00 - 000002B00000] Size: 43,00 MB
GPT: FLASHINFO [000746BFBE00 - 000001000000] Size: 16,00 MB
GPT: BACKUP_GPT [000747BFBE00 - 000000004200] Size: 16,50 KB
Reading Table Completed
Scanning GUID Partition Table from ROM2
GPT Signature Not Found. Break..
Scanning GUID Partition Table from ROM3
GPT Signature Not Found. Break..

Partition #9 mount as [/mnt/vendor/opporeserve] -> 64,00 MB
Partition #15 mount as [/mnt/vendor/nvcfg] -> 32,00 MB
Partition #16 mount as [/mnt/vendor/nvdata] -> 64,00 MB
Partition #18 mount as [/mnt/vendor/protect_f] -> 8,00 MB
Partition #19 mount as [/mnt/vendor/protect_s] -> 8,47 MB
Partition #21 mount as [/mnt/vendor/persist] -> 48,00 MB
Partition #40 mount as [/dev_40] -> 256,00 MB
Partition #41 mount as [/dev_41] -> 920,00 MB
Partition #42 mount as [/dev_42] -> 4,69 GB
Partition #43 mount as [/cache] -> 432,00 MB
Partition #44 mount as [/data] -> 22,13 GB

EmptyCheck:
EMPTY -> #4 - [BOOT_PARA]
EMPTY -> #9 - [OPPORESERVE3]
EMPTY -> #11 - [EXPDB]
EMPTY -> #16 - [METADATA]

Error Reading Sector: 819200, Count: 512, Err: -3/R_DATA_TOUT_ERR
Try Again #1
EMPTY -> #21 - [SEC1]
EMPTY -> #29 - [GZ1]
EMPTY -> #30 - [GZ2]
EMPTY -> #44 - [OTP]
EmptyCheck: Done

=================================
Warning! Device Blocked by FRP
For Reset FRP Try to Tools Tab
Press Reset FRP Button
Partition #13 -> FRP
=================================

Android Info:
Platform = mt6765

Android Info:
Vendor = OPPO
CPU ABI = arm64-v8a
Android Version = 9
Security Patch = 2019-06-05

Android Info:
Brand = OPPO
Device = OP486C
Model = CPH1923
Product = CPH1923
Firm Version = CPH1923EX_11_A.17
Inc. Version = 1559382133
Firm Date = Sat Jun 1 17:42:13 CST 2019
OPPO Name = OPPO A1k

Scanner Thread Terminated
Elapsed: 00:00:57:958
Found 47 Partition(s)..
Scan Done. Init Main Engine...

Resetting EasyJtag Box. Wait..
CMD Pullup Level: 2111 mV
CMD Active Level: 2536 mV
Reader Engine Initialized.. 0/OK
Source: EasyJtag Port [EMMC/SD/MMC]
Generation: GPT [QC/SAMS/BCM/INTEL/MTK]
Bus Mode: 1BIT
Operation Done: [Init Engine], Elapsed: 00:00:01:561

Universal Wipe User Data v1.0

Break by User..

Source: EasyJtag Port [EMMC/SD/MMC]
Generation: GPT [QC/SAMS/BCM/INTEL/MTK]
Box Voltage set to: 2800 mV
Scanner Thread Created..

Config: 1011111111101111
Setup HiPower CLK: OFF
Disable HS Timing: TRUE
Connecting To EasyJtag Plus Box: 2800mV/1MHz/1BIT
EasyJtag Plus Box Found! Result: 0/OK
CMD Pullup Level: 743 mV
CMD Active Level: 1547 mV
EasyJtag Plus S/N: E48F82366B9EF189
EasyJtag Plus Box FirmWare: 2.53

Box Bus Width = 1 BIT
Box Hardware = EasyJtag 2nd Generation

Search EMMC Chip...

EMMC NOT Found! Error: -1/CMD_TOUT_ERR

Scanner Thread Terminated
Elapsed: 00:00:05:191
Found 0 Partition(s)..

Search Partitions Fail..
Check EMMC or Run Pool Test..

Source: EasyJtag Port [EMMC/SD/MMC]
Generation: GPT [QC/SAMS/BCM/INTEL/MTK]
Box Voltage set to: 2800 mV
Scanner Thread Created..

Config: 1011111111101111
Setup HiPower CLK: OFF
Disable HS Timing: TRUE
Connecting To EasyJtag Plus Box: 2800mV/1MHz/1BIT
EasyJtag Plus Box Found! Result: 0/OK
CMD Pullup Level: 2764 mV
CMD Active Level: 2813 mV
EasyJtag Plus S/N: E48F82366B9EF189
EasyJtag Plus Box FirmWare: 2.53

Box Bus Width = 1 BIT
Box Hardware = EasyJtag 2nd Generation

Search EMMC Chip...

EMMC NOT Found! Error: -1/CMD_TOUT_ERR

Scanner Thread Terminated
Elapsed: 00:00:01:430
Found 0 Partition(s)..

Search Partitions Fail..
Check EMMC or Run Pool Test..

Source: EasyJtag Port [EMMC/SD/MMC]
Generation: GPT [QC/SAMS/BCM/INTEL/MTK]
Box Voltage set to: 2800 mV
Scanner Thread Created..

Config: 1011111111101111
Setup HiPower CLK: OFF
Disable HS Timing: TRUE
Connecting To EasyJtag Plus Box: 2800mV/1MHz/1BIT
EasyJtag Plus Box Found! Result: 0/OK
CMD Pullup Level: 2111 mV
CMD Active Level: 2265 mV
EasyJtag Plus S/N: E48F82366B9EF189
EasyJtag Plus Box FirmWare: 2.53

Box Bus Width = 1 BIT
Box Hardware = EasyJtag 2nd Generation

Search EMMC Chip...

EMMC Chip Found! 0/OK
EMMC CID: 150100514436334D420332D5CE7216B5
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC VENDOR: SAMSUNG
EMMC NAME: QD63MB
EMMC SERIAL: 32D5CE72
EMMC REVISION: 03
EMMC ROM1 Size: 61071360 Block(s)/29820 MB
EMMC ROM2/3 Size: 8192 Block(s)/4096 KB
EMMC RPMB Size: 32768 Block(s)/16384 KB
EMMC RPMB Counter: 2162
EMMC RPMB Answer: 0/OK
Switch To ROM1 Part: 0/OK

EMMC REV: 1.8 (for MMC v5.1)
EMMC VER: MMC 5.1
EMMC DEV Life Time: 0x01 -> Normal
EMMC MLC Life Time: 0x01 -> 0% - 10% Life Time Used
EMMC SLC Life Time: 0x01 -> 0% - 10% Life Time Used
EMMC Boot Config: 0x48/0x02/0x01
ExtCSD Automatically Saved..

Scanning Data From EMMC. Please wait..

Scanning GUID Partition Table from ROM1
GUID Partition Table is Found. Max Parts: 128
GPT: GPT [000000000000 - 000000004400] Size: 17,00 KB
GPT: BOOT_PARA [000000008000 - 000000100000] Size: 1,00 MB
GPT: RECOVERY [000000108000 - 000002000000] Size: 32,00 MB
GPT: PARA [000002108000 - 000000080000] Size: 512,00 KB
GPT: OPPORESERVE1 [000002188000 - 000000800000] Size: 8,00 MB
GPT: OPPORESERVE2 [000002988000 - 000004000000] Size: 64,00 MB
GPT: OPPORESERVE3 [000006988000 - 000004000000] Size: 64,00 MB
GPT: OPPO_CUSTOM [00000A988000 - 000000100000] Size: 1,00 MB
GPT: EXPDB [00000AA88000 - 000001400000] Size: 20,00 MB
GPT: FRP [00000BE88000 - 000000100000] Size: 1,00 MB
GPT: VBMETA [00000BF88000 - 000000800000] Size: 8,00 MB
GPT: NVCFG [00000C788000 - 000002000000] Size: 32,00 MB
GPT: NVDATA [00000E788000 - 000004000000] Size: 64,00 MB
GPT: METADATA [000012788000 - 000002000000] Size: 32,00 MB
GPT: PROTECT1 [000014788000 - 000000800000] Size: 8,00 MB
GPT: PROTECT2 [000014F88000 - 000000878000] Size: 8,47 MB
GPT: SECCFG [000015800000 - 000000800000] Size: 8,00 MB
GPT: PERSIST [000016000000 - 000003000000] Size: 48,00 MB
GPT: SEC1 [000019000000 - 000000200000] Size: 2,00 MB
GPT: PROINFO [000019200000 - 000000300000] Size: 3,00 MB
GPT: MD1IMG [000019500000 - 000006400000] Size: 100,00 MB
GPT: SPMFW [00001F900000 - 000000100000] Size: 1,00 MB
GPT: SCP1 [00001FA00000 - 000000100000] Size: 1,00 MB
GPT: SCP2 [00001FB00000 - 000000100000] Size: 1,00 MB
GPT: SSPM_1 [00001FC00000 - 000000100000] Size: 1,00 MB
GPT: SSPM_2 [00001FD00000 - 000000100000] Size: 1,00 MB
GPT: GZ1 [00001FE00000 - 000001000000] Size: 16,00 MB
GPT: GZ2 [000020E00000 - 000001000000] Size: 16,00 MB
GPT: NVRAM [000021E00000 - 000004000000] Size: 64,00 MB
GPT: LK [000025E00000 - 000000100000] Size: 1,00 MB
GPT: LK2 [000025F00000 - 000000100000] Size: 1,00 MB
GPT: BOOT [000026000000 - 000002000000] Size: 32,00 MB
GPT: LOGO [000028000000 - 000001000000] Size: 16,00 MB
GPT: DTBO [000029000000 - 000001000000] Size: 16,00 MB
GPT: TEE1 [00002A000000 - 000000500000] Size: 5,00 MB
GPT: TEE2 [00002A500000 - 000000B00000] Size: 11,00 MB
GPT: ODM [00002B000000 - 000010000000] Size: 256,00 MB
GPT: VENDOR [00003B000000 - 000039800000] Size: 920,00 MB
GPT: SYSTEM [000074800000 - 00012C000000] Size: 4,69 GB
GPT: CACHE [0001A0800000 - 00001B000000] Size: 432,00 MB
GPT: USERDATA [0001BB800000 - 0005888FBE00] Size: 22,13 GB
GPT: OTP [0007440FBE00 - 000002B00000] Size: 43,00 MB
GPT: FLASHINFO [000746BFBE00 - 000001000000] Size: 16,00 MB
GPT: BACKUP_GPT [000747BFBE00 - 000000004200] Size: 16,50 KB
Reading Table Completed
Scanning GUID Partition Table from ROM2
GPT Signature Not Found. Break..
Scanning GUID Partition Table from ROM3
GPT Signature Not Found. Break..

Partition #9 mount as [/mnt/vendor/opporeserve] -> 64,00 MB
Partition #15 mount as [/mnt/vendor/nvcfg] -> 32,00 MB
Partition #16 mount as [/mnt/vendor/nvdata] -> 64,00 MB
Partition #18 mount as [/mnt/vendor/protect_f] -> 8,00 MB
Partition #19 mount as [/mnt/vendor/protect_s] -> 8,47 MB
Partition #21 mount as [/mnt/vendor/persist] -> 48,00 MB
Partition #40 mount as [/dev_40] -> 256,00 MB
Partition #41 mount as [/dev_41] -> 920,00 MB
Partition #42 mount as [/dev_42] -> 4,69 GB
Partition #43 mount as [/cache] -> 432,00 MB
Partition #44 mount as [/data] -> 22,13 GB

EmptyCheck:
EMPTY -> #4 - [BOOT_PARA]
EMPTY -> #9 - [OPPORESERVE3]
EMPTY -> #11 - [EXPDB]
EMPTY -> #16 - [METADATA]
EMPTY -> #21 - [SEC1]
EMPTY -> #29 - [GZ1]
EMPTY -> #30 - [GZ2]
EMPTY -> #44 - [OTP]
EmptyCheck: Done

=================================
Warning! Device Blocked by FRP
For Reset FRP Try to Tools Tab
Press Reset FRP Button
Partition #13 -> FRP
=================================

Android Info:
Platform = mt6765

Android Info:
Vendor = OPPO
CPU ABI = arm64-v8a
Android Version = 9
Security Patch = 2019-06-05

Android Info:
Brand = OPPO
Device = OP486C
Model = CPH1923
Product = CPH1923
Firm Version = CPH1923EX_11_A.17
Inc. Version = 1559382133
Firm Date = Sat Jun 1 17:42:13 CST 2019
OPPO Name = OPPO A1k

Scanner Thread Terminated
Elapsed: 00:00:46:070
Found 47 Partition(s)..
Scan Done. Init Main Engine...

Resetting EasyJtag Box. Wait..
CMD Pullup Level: 2109 mV
CMD Active Level: 2541 mV
Reader Engine Initialized.. 0/OK
Source: EasyJtag Port [EMMC/SD/MMC]
Generation: GPT [QC/SAMS/BCM/INTEL/MTK]
Bus Mode: 1BIT
Operation Done: [Init Engine], Elapsed: 00:00:01:590

Universal Wipe User Data v1.0

Wiping MISC Partition..
Partition MISC Not Found. Skip..

Wiping PARA Partition..
Partition #7 is '/PARA'. Erasing..
Wipe Mode: Oppo/Vivo Factory Reset
Wipe 'PARA' Partition Done..

Done Wiping Data..

Elapsed Time: [00:00:00:060]
Operation Done: [Universal Wipe Data], Elapsed: 00:00:00:070
 
يجب تسجيل الدخول أو التسجيل كي تتمكن من الرد هنا.
أعلى