akramalaeddine
عضو
- إنضم
- 27 مايو 2018
- المشاركات
- 5
- مستوى التفاعل
- 0
- النقاط
- 0
ا
هذه هي مراحل الفلاش
Card found : S/N : 284E2869 , v0147
Chinese Miracle II [MTK module] v 1.58
Scatter Load Ok , BaseBand : MT6580 , Project : wd45bl , Storage : EMMC
Files found : 14 , Set to Flash : 13
Ready to Flash!
Operation : Flash [ v1.58 ]
======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 23 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : NOT INSTALLED
Initialize Memory ...
DRAM configured from ScatFW!
DRAM initialize passed!
DRAM size : 0x40000000
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x00 , OEM : 0000
[eMMC] : FLASH_INF : [NOT_IN_BASE] ,
[eMMC] : FLASH_CID : 00000000000000000000000000000000
[eMMC] : FLASH_BRT : 0x00000000 , 0x00000000 , 0x00000000
[eMMC] : FLASH_LEN : 0x0000000000000000
[eMMC] : FLASH_UCP : 0 MiB [eMMC BAD_CONN]
DEV RID : 0x50181C7BE7F3176EBE5BDBD901AC0727
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : DA_HANDSET_ROM_INFO_NOT_FOUND
SOC VERIFY : C1
Boot Ok!
ScatCFG : BaseBand : MT6580 , Project : wd45bl , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled
Switching to HSUSB
HSUSB Init Ok
BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!
BL : BatteryLevel : 3746 mV
BL : BatteryLevel Ok
BL : Flash Pre-Erase
Total blocks to Erase : 1
Erase : 0x0000000001C80000-0xFFFFFFFFFC380000
Erase Error! Something went wrong!
Operation Failed
Elapsed: 00:00:23
Reconnect Power/Cable!
لسلام عليكم حاولت تمرير فلاش لهاتف
starlight plus
لكن بدون جدوى
مع العلم اني أستعمل دونغل cm2
starlight plus
لكن بدون جدوى
مع العلم اني أستعمل دونغل cm2
هذه هي مراحل الفلاش
Card found : S/N : 284E2869 , v0147
Chinese Miracle II [MTK module] v 1.58
Scatter Load Ok , BaseBand : MT6580 , Project : wd45bl , Storage : EMMC
Files found : 14 , Set to Flash : 13
Ready to Flash!
Operation : Flash [ v1.58 ]
======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 23 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : NOT INSTALLED
Initialize Memory ...
DRAM configured from ScatFW!
DRAM initialize passed!
DRAM size : 0x40000000
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x00 , OEM : 0000
[eMMC] : FLASH_INF : [NOT_IN_BASE] ,
[eMMC] : FLASH_CID : 00000000000000000000000000000000
[eMMC] : FLASH_BRT : 0x00000000 , 0x00000000 , 0x00000000
[eMMC] : FLASH_LEN : 0x0000000000000000
[eMMC] : FLASH_UCP : 0 MiB [eMMC BAD_CONN]
DEV RID : 0x50181C7BE7F3176EBE5BDBD901AC0727
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : DA_HANDSET_ROM_INFO_NOT_FOUND
SOC VERIFY : C1
Boot Ok!
ScatCFG : BaseBand : MT6580 , Project : wd45bl , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled
Switching to HSUSB
HSUSB Init Ok
BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!
BL : BatteryLevel : 3746 mV
BL : BatteryLevel Ok
BL : Flash Pre-Erase
Total blocks to Erase : 1
Erase : 0x0000000001C80000-0xFFFFFFFFFC380000
Erase Error! Something went wrong!
Operation Failed
Elapsed: 00:00:23
Reconnect Power/Cable!