صفحة 1 من 4 123 ... الأخيرةالأخيرة
النتائج 1 إلى 10 من 35

الموضوع: Repair Boot OPPO A5 Via Medusa Pro

  1. Top | #1

    :: مشرف ::
    :: قسم التلفاز و المستقبلات ::
    ::OctopLusJTAG/MudesaBox::


    تاريخ التسجيل
    Aug 2012
    الإقامة
    EL ASSAFIA **LAGHOUAT
    المشاركات
    2,674
    معدل تقييم المستوى
    274
    الشكر
    129
    تم شكره 2,848 في 479 مشاركة.

    افتراضي Repair Boot OPPO A5 Via Medusa Pro


    Repair Boot OPPO A5  Via Medusa Pro

    حصريا دعم ربير بوت OPPO A5



    Repair Boot OPPO A5  Via Medusa Pro


    Repair Boot OPPO A5  Via Medusa Pro

    ملاحظة مهمة : هناك خطا شائع عند توصيل EMMC لتتم قراءة صحيحة
    يتم الاستغناء على 2.8V ...والاعتمادفقط على 1.8V وتوصيل USB

    كود:
    Please disconnect battery and USB cable.
    
    Model Settings:
    Interface : eMMC
    Voltage   : 2.8V
    Bus Mode  : 1 bit
    Bus speed : Auto
    
    Connecting...
    Device       : Hynix eMMC HAG4a2
    Core         : 
    Page size    : 512 B
    Block size   : 512 B
    Block count  : 30777344
    Size         : 14.68 GB (15028.00 MB)
    ---------------------------------------------------------------
    CID Info
    
    CID                   : 90014A484147346132A5C0D7B2E1C535
    Manufacturer ID       : 0X90
    Device/BGA            : BGA (Discrete embedded)
    OEM/Application ID    : 0X4A
    Product name          : HAG4a2
    Product revision      : 10.5
    Product serial number : (hex) C0D7B2E1
    Manufacturing date    : 12/2018
    ---------------------------------------------------------------
    CSD Info
    
    CSD                   : D02701328F5903FFFFFFFFE78A400017
    CSD structure         : CSD version No. 1.2
    SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                            4.51, 5.0, 5.01, 5.1
    Data read access time1: 15 ms
    TRAN speed            : 26 MHz
    READ block length     : 512 Bytes
    WP group enable       : YES
    PERM_WRITE_PROTECT    : NO
    TMP_WRITE_PROTECT     : NO
    ---------------------------------------------------------------
    EXTCSD Info
    
    Revision 1.8 (for MMC v5.1)
    Erase block size      : 512 Kbytes
    Boot1 size            : 4096 Kbytes
    Boot2 size            : 4096 Kbytes
    RPMB size             : 4096 Kbytes
    
    Partition config      : (0x38) 00111000
    Boot partition enable : User area
    (Bus width = 1Bit)
    Boot ACK              : No boot acknowledge sent (default)
    
    Boot bus conditions   : (0x00) 00000000
    Boot bus width        : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
    Reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
    Boot mode             : Use single data rate + backward compatible timings in boot operation (default)
    
    RST_n function        : (0x01) RST_n signal is permanently enabled
    
    Partitioning support  : Device supports partitioning features
    Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
    Max enhanced data size: 7692288 Kbytes
    Partitions attribute  : 0x0
    Part setting completed: 0x0
    GP partition 1 size   : 0 b
    GP partition 2 size   : 0 b
    GP partition 3 size   : 0 b
    GP partition 4 size   : 0 b
    Enhanced area size    : (0x0) 0 b
    Enhanced area start   : (0x0) 0 b
    
    Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/HAG4a2_24_10_2020_12_41_47.bin.
    Connect successful.


    ملف SRF +Emmc pinout
    كود:
    Partition table has been found on device.
    
    Switched to boot area partition 1.
    Added partition BOOT1 to constructor file.
    
    Switched to boot area partition 2.
    Added partition BOOT2 to constructor file.
    
    Switched to user area.
    Added partition GPT to constructor file.
    Added partition oppodycnvbk to constructor file.
    Added partition oppostanvbk to constructor file.
    Added partition modemst1 to constructor file.
    Added partition modemst2 to constructor file.
    Added partition persist to constructor file.
    Added partition opporeserve1 to constructor file.
    Added partition opporeserve2 to constructor file.
    Added partition fsc to constructor file.
    Added partition ssd to constructor file.
    Added partition sbl1 to constructor file.
    Added partition rpm to constructor file.
    Added partition tz to constructor file.
    Added partition devcfg to constructor file.
    Added partition sbl1bak to constructor file.
    Added partition rpmbak to constructor file.
    Added partition tzbak to constructor file.
    Added partition devcfgbak to constructor file.
    Added partition dsp to constructor file.
    Added partition DDR to constructor file.
    Added partition fsg to constructor file.
    Added partition sec to constructor file.
    Added partition aboot to constructor file.
    Added partition abootbak to constructor file.
    Added partition modem to constructor file.
    Added partition dtbo to constructor file.
    Added partition vbmeta to constructor file.
    Added partition boot to constructor file.
    Added partition recovery to constructor file.
    Added partition devinfo to constructor file.
    Added partition splash to constructor file.
    Added partition LOGO to constructor file.
    Added partition DRIVER to constructor file.
    Added partition cache to constructor file.
    Added partition misc to constructor file.
    Added partition keystore to constructor file.
    Added partition config to constructor file.
    Added partition log to constructor file.
    Added partition oem to constructor file.
    Added partition limits to constructor file.
    Added partition mota to constructor file.
    Added partition dip to constructor file.
    Added partition mdtp to constructor file.
    Added partition syscfg to constructor file.
    Added partition mcfg to constructor file.
    Added partition lksecapp to constructor file.
    Added partition cmnlib to constructor file.
    Added partition cmnlib64 to constructor file.
    Added partition keymaster to constructor file.
    Added partition lksecappbak to constructor file.
    Added partition cmnlibbak to constructor file.
    Added partition cmnlib64bak to constructor file.
    Added partition keymasterbak to constructor file.
    Added partition apdp to constructor file.
    Added partition msadp to constructor file.
    Added partition dpo to constructor file.
    Added partition logdump to constructor file.
    Added partition vm-kystore to constructor file.
    Added partition vm-data to constructor file.
    Added partition hyp to constructor file.
    Added partition vm-system to constructor file.
    Added partition vm-linux to constructor file.
    SRF "C:/Users/m/Desktop/Oppo_A5 BY DAHMANI MED.srf" has been installed successfully



    Repair Boot OPPO A5  Via Medusa Pro

    كود:
    ---------------------------------------------------------------Repairing from file "C:/Users/m/Desktop/Oppo_A5 BY DAHMANI MED.srf".
    Write data verification is enabled.
    
    Switched to boot area partition 1.
    Writing BOOT1 partition...	Done.
    
    Switched to boot area partition 2.
    Writing BOOT2 partition...	Done.
    
    Switched to user area.
    Writing GPT partition...	Done.
    Writing oppodycnvbk partition...	Done.
    Writing oppostanvbk partition...	Done.
    Writing modemst1 partition...	Done.
    Writing modemst2 partition...	Done.
    Writing persist partition...	Done.
    Writing opporeserve1 partition...	Done.
    Writing opporeserve2 partition...	Done.
    Writing fsc partition...	Done.
    Writing ssd partition...	Done.
    Writing sbl1 partition...	Done.
    Writing rpm partition...	Done.
    Writing tz partition...	Done.
    Writing devcfg partition...	Done.
    Writing sbl1bak partition...	Done.
    Writing rpmbak partition...	Done.
    Writing tzbak partition...	Done.
    Writing devcfgbak partition...	Done.
    Writing dsp partition...	Done.
    Writing DDR partition...	Done.
    Writing fsg partition...	Done.
    Writing sec partition...	Done.
    Writing aboot partition...	Done.
    Writing abootbak partition...	Done.
    Writing modem partition...	Done.
    Writing dtbo partition...	Done.
    Writing vbmeta partition...	Done.
    Writing boot partition...	Done.
    Writing recovery partition...	Done.
    Writing devinfo partition...	Done.
    Writing splash partition...	Done.
    Writing LOGO partition...	Done.
    Writing DRIVER partition...	Done.
    Writing cache partition...	Done.
    Writing misc partition...	Done.
    Writing keystore partition...	Done.
    Writing config partition...	Done.
    Writing log partition...	Done.
    Writing oem partition...	Done.
    Writing limits partition...	Done.
    Writing mota partition...	Done.
    Writing dip partition...	Done.
    Writing mdtp partition...	Done.
    Writing syscfg partition...	Done.
    Writing mcfg partition...	Done.
    Writing lksecapp partition...	Done.
    Writing cmnlib partition...	Done.
    Writing cmnlib64 partition...	Done.
    Writing keymaster partition...	Done.
    Writing lksecappbak partition...	Done.
    Writing cmnlibbak partition...	Done.
    Writing cmnlib64bak partition...	Done.
    Writing keymasterbak partition...	Done.
    Writing apdp partition...	Done.
    Writing msadp partition...	Done.
    Writing dpo partition...	Done.
    Writing logdump partition...	Done.
    Writing vm-kystore partition...	Done.
    Writing vm-data partition...	Done.
    Writing hyp partition...	Done.
    Writing vm-system partition...	Done.
    Writing vm-linux partition...	Done.
    
    Smart Repair is successfully complete.
    SW: 2.1.4; FW: 1.24.
    Disconnected.
    

    قراءة دامب READ DUMP

    كود:
    CID Info
    
    CID                   : 90014A484147346132A5C0D7B2E1C535
    Manufacturer ID       : 0X90
    Device/BGA            : BGA (Discrete embedded)
    OEM/Application ID    : 0X4A
    Product name          : HAG4a2
    Product revision      : 10.5
    Product serial number : (hex) C0D7B2E1
    Manufacturing date    : 12/2018
    ---------------------------------------------------------------
    CSD Info
    
    CSD                   : D02701328F5903FFFFFFFFE78A400017
    CSD structure         : CSD version No. 1.2
    SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                            4.51, 5.0, 5.01, 5.1
    Data read access time1: 15 ms
    TRAN speed            : 26 MHz
    READ block length     : 512 Bytes
    WP group enable       : YES
    PERM_WRITE_PROTECT    : NO
    TMP_WRITE_PROTECT     : NO
    ---------------------------------------------------------------
    EXTCSD Info
    
    Revision 1.8 (for MMC v5.1)
    Erase block size      : 512 Kbytes
    Boot1 size            : 4096 Kbytes
    Boot2 size            : 4096 Kbytes
    RPMB size             : 4096 Kbytes
    
    Partition config      : (0x38) 00111000
    Boot partition enable : User area
    (Bus width = 1Bit)
    Boot ACK              : No boot acknowledge sent (default)
    
    Boot bus conditions   : (0x00) 00000000
    Boot bus width        : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
    Reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
    Boot mode             : Use single data rate + backward compatible timings in boot operation (default)
    
    RST_n function        : (0x01) RST_n signal is permanently enabled
    
    Partitioning support  : Device supports partitioning features
    Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
    Max enhanced data size: 7692288 Kbytes
    Partitions attribute  : 0x0
    Part setting completed: 0x0
    GP partition 1 size   : 0 b
    GP partition 2 size   : 0 b
    GP partition 3 size   : 0 b
    GP partition 4 size   : 0 b
    Enhanced area size    : (0x0) 0 b
    Enhanced area start   : (0x0) 0 b
    
    Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/HAG4a2_24_10_2020_13_17_56.bin.
    Connect successful.
    ---------------------------------------------------------------
    SW: 2.1.4; FW: 1.24.
    P00: GPT              (00000000, 00000028)	20 KB
    P01: oppodycnvbk      (00000028, 00005000)	10 MB
    P02: oppostanvbk      (00005028, 00005000)	10 MB
    P03: modemst1         (0000A028, 00000C00)	1536 KB
    P04: modemst2         (0000AC28, 00000C00)	1536 KB
    P05: persist          (0000B828, 00010000)	32 MB
    P06: opporeserve1     (0001B828, 00004000)	8 MB
    P07: opporeserve2     (0001F828, 00020000)	64 MB
    P08: fsc              (0003F828, 00000002)	1024 b
    P09: ssd              (0003F830, 00000010)	8 KB
    P10: sbl1             (0003F840, 00000400)	512 KB
    P11: rpm              (0003FC40, 00000400)	512 KB
    P12: tz               (00040040, 00001000)	2048 KB
    P13: devcfg           (00041040, 00000200)	256 KB
    P14: sbl1bak          (00041240, 00000400)	512 KB
    P15: rpmbak           (00041640, 00000400)	512 KB
    P16: tzbak            (00041A40, 00001000)	2048 KB
    P17: devcfgbak        (00042A40, 00000200)	256 KB
    P18: dsp              (00042C40, 00008000)	16 MB
    P19: DDR              (0004C000, 00000040)	32 KB
    P20: fsg              (0004C040, 00002000)	4 MB
    P21: sec              (0004E040, 00000020)	16 KB
    P22: aboot            (0004E060, 00000800)	1024 KB
    P23: abootbak         (0004E860, 00000800)	1024 KB
    P24: modem            (0004F060, 00040000)	128 MB
    P25: dtbo             (0008F060, 00004000)	8 MB
    P26: vbmeta           (00093060, 00000080)	64 KB
    P27: boot             (000930E0, 00020000)	64 MB
    P28: recovery         (000B30E0, 00020000)	64 MB
    P29: devinfo          (000D30E0, 00000800)	1024 KB
    P30: splash           (000D4000, 00005800)	11 MB
    P31: LOGO             (000D9800, 00010000)	32 MB
    P32: DRIVER           (000E9800, 00010000)	32 MB
    P33: cache            (000F9800, 00080000)	256 MB
    P34: misc             (00179800, 00000800)	1024 KB
    P35: keystore         (0017A000, 00000400)	512 KB
    P36: config           (0017A400, 00000040)	32 KB
    P37: log              (0017A440, 00020000)	64 MB
    P38: oem              (0019A440, 00000800)	1024 KB
    P39: limits           (0019C000, 00000040)	32 KB
    P40: mota             (001A0000, 00000400)	512 KB
    P41: dip              (001A0400, 00000800)	1024 KB
    P42: mdtp             (001A0C00, 00010000)	32 MB
    P43: syscfg           (001B0C00, 00000400)	512 KB
    P44: mcfg             (001B1000, 00002000)	4 MB
    P45: lksecapp         (001B4000, 00000100)	128 KB
    P46: cmnlib           (001B4100, 00000800)	1024 KB
    P47: cmnlib64         (001B4900, 00000800)	1024 KB
    P48: keymaster        (001B5100, 00000800)	1024 KB
    P49: lksecappbak      (001B5900, 00000100)	128 KB
    P50: cmnlibbak        (001B5A00, 00000800)	1024 KB
    P51: cmnlib64bak      (001B6200, 00000800)	1024 KB
    P52: keymasterbak     (001B6A00, 00000800)	1024 KB
    P53: apdp             (001B8000, 00000200)	256 KB
    P54: msadp            (001B8200, 00000200)	256 KB
    P55: dpo              (001B8400, 00000010)	8 KB
    P56: logdump          (001B8410, 00020000)	64 MB
    P57: vm-kystore       (001D8410, 00000800)	1024 KB
    P58: vm-data          (001D8C10, 00005000)	10 MB
    P59: hyp              (001E0000, 00004000)	8 MB
    P60: vm-system        (001E4000, 00020000)	64 MB
    P61: vm-linux         (00204000, 00010000)	32 MB
    P62: system           (00214000, 006B4800)	3433 MB
    P63: vendor           (008C8800, 0020FB00)	1055 MB
    P64: userdata         (00ADC000, 0127DFDF)	9.246 GB
    Backuping modemst1 partition... 
    Opening C:/Program Files/Medusa Pro Software/Backups/HAG4a2_modemst1_0xa028_0xc00_24_10_2020_13_17_56.bin file...
    Reading. Please wait... Done.
    Elapsed time 00:00:00 
    SW: 2.1.4; FW: 1.24.
    Backuping modemst2 partition... 
    Opening C:/Program Files/Medusa Pro Software/Backups/HAG4a2_modemst2_0xac28_0xc00_24_10_2020_13_17_56.bin file...
    Reading. Please wait... Done.
    Elapsed time 00:00:00 
    SW: 2.1.4; FW: 1.24.
    Backuping fsg partition... 
    Opening C:/Program Files/Medusa Pro Software/Backups/HAG4a2_fsg_0x4c040_0x2000_24_10_2020_13_17_56.bin file...
    Reading. Please wait... Done.
    Elapsed time 00:00:01 
    SW: 2.1.4; FW: 1.24.
    
    ---------------------------------------------------------------Searching Android build info...
    Ok
    
    Disk/Image size       : ab400000 bytes
    Device sector size    : 512 bytes
    Partition offset      : 2179072
    Number of sectors     : 7030784
    Build ID              : OPM1.171019.026
    Release ID            : 8.1.0
    Architecture ABI      : arm64-v8a
    Architecture ABI List : arm64-v8a,armeabi-v7a,armeabi
    Build Description     : S88051AA1-user 8.1.0 OPM1.171019.026 eng.root.20190624.211613 release-keys
    
    ---------------------------------------------------------------Please select file.
    
    Switched to boot area partition 1.
    Opening C:/Users/m/Desktop/OPPO A5/Hynix eMMC HAG4a2_24_10_2020_13_18_58.bin file...
    Reading. Please wait... Done.
    Elapsed time 00:00:01 
    SW: 2.1.4; FW: 1.24.
    
    Switched to boot area partition 2.
    Opening C:/Users/m/Desktop/OPPO A5/Hynix eMMC HAG4a2_24_10_2020_13_19_13.bin file...
    Reading. Please wait... Done.
    Elapsed time 00:00:01 
    SW: 2.1.4; FW: 1.24.
    EXT_CSD saved to file C:/Users/m/Desktop/OPPO A5/EXT_CSD_24_10_2020_13_19_22.bin.
    
    Switched to user area.
    Opening E:/Hynix eMMC HAG4a2_24_10_2020_13_19_39.bin file...
    Reading. Please wait...


    Repair Boot OPPO A5  Via Medusa Pro

    الملفات ستكون على سيرفر OCTOPLUS /MEDUSA PRO


    والله ولي التوفيق
    توقيع dahmani med
    غيّر حياتك.. واصنع مجدك بنفسك .. ولا تنظر الى غيرك ....فلن يكون ابدا مثلك

    Repair Boot OPPO A5  Via Medusa Pro

  2. 54 من أعضاء المنتدى أعجبوا بمشاركة dahmani med


  3. Top | #2

    عضو اساسي
    تاريخ التسجيل
    Sep 2013
    الإقامة
    قالول (الشلف)
    المشاركات
    1,326
    معدل تقييم المستوى
    183
    الشكر
    2,659
    تم شكره 521 في 231 مشاركة.

    افتراضي رد: Repair Boot OPPO A5 Via Medusa Pro

    جزاك الله كل خير اخي

  4. Top | #3

    :: عضو مميز ::

    تاريخ التسجيل
    Nov 2019
    الإقامة
    B A T N A
    المشاركات
    844
    معدل تقييم المستوى
    193
    الشكر
    473
    تم شكره 256 في 48 مشاركة.

    افتراضي رد: Repair Boot OPPO A5 Via Medusa Pro

    عليكم السلام

    يعطيك الصحة خويا دحماني

  5. Top | #4

    :: Super User ::

    تاريخ التسجيل
    Dec 2015
    الإقامة
    غرداية _ متلـيلي
    المشاركات
    1,020
    معدل تقييم المستوى
    185
    الشكر
    922
    تم شكره 1,307 في 228 مشاركة.

    افتراضي رد: Repair Boot OPPO A5 Via Medusa Pro

    ممــــــتاز جـــــدا اخي دحماني

    وفقك الله الى مايحبه ويرضاه
    توقيع .:: Sebti _ Gsm ::.
    «رأس الحكمة مخافة الله»
    "'لَا إِلَهَ إِلَّا أَنْتَ سُبْحَانَكَ إِنِّي كُنْتُ مِنَ الظَّالِمِينَ""

  6. Top | #5

    :: عضو محترف ::

    تاريخ التسجيل
    Jan 2016
    المشاركات
    671
    معدل تقييم المستوى
    194
    الشكر
    553
    تم شكره 220 في 35 مشاركة.

    افتراضي رد: Repair Boot OPPO A5 Via Medusa Pro

    جزاك الله خيرا اخ دحماني
    بارك الله فيك

  7. Top | #6

    عضو نشط
    تاريخ التسجيل
    May 2016
    الإقامة
    العلمة - سطيف
    المشاركات
    221
    معدل تقييم المستوى
    22
    الشكر
    270
    تم شكره 473 في 97 مشاركة.

    افتراضي رد: Repair Boot OPPO A5 Via Medusa Pro

    يعطيك الصحة بارك الله فيك

  8. Top | #7

    عضو اساسي
    تاريخ التسجيل
    Mar 2016
    المشاركات
    550
    معدل تقييم المستوى
    54
    الشكر
    3,834
    تم شكره 848 في 334 مشاركة.

    افتراضي رد: Repair Boot OPPO A5 Via Medusa Pro

    جزاك الله خيرا اخي
    بالتوفيق

  9. Top | #8

    عضو اساسي
    تاريخ التسجيل
    Dec 2018
    الإقامة
    عنابة
    المشاركات
    557
    معدل تقييم المستوى
    160
    الشكر
    405
    تم شكره 141 في 25 مشاركة.

    افتراضي رد: Repair Boot OPPO A5 Via Medusa Pro

    عندما أرى موضوع جديد لك افرح

    الله يبارك خويا دحماني

  10. Top | #9

    :: عضو مميز ::

    تاريخ التسجيل
    Feb 2016
    المشاركات
    1,563
    معدل تقييم المستوى
    201
    الشكر
    2,348
    تم شكره 1,181 في 378 مشاركة.

    افتراضي رد: Repair Boot OPPO A5 Via Medusa Pro

    جزاك الله كل خير اخي

  11. Top | #10

    :: مشرف ::
    :: قسم Octoplus Box ::
    :: قسم Chimera Tool ::
    :: قسم Infinity Best ::
    :: قسم Hydra Dongle ::


    تاريخ التسجيل
    Sep 2015
    الإقامة
    العالم الاسلامي
    المشاركات
    2,013
    معدل تقييم المستوى
    128
    الشكر
    886
    تم شكره 3,611 في 848 مشاركة.

    افتراضي رد: Repair Boot OPPO A5 Via Medusa Pro

    جزاك الله خيرا اخ دحماني
    بارك الله فيك
    توقيع ProfKefah
    قناتي على اليوتيوب

    تفعيل البوكس والدونجل وكريدت فتح شبكة سامسونغ وايكلاود وشبكة الايفون في العراق

صفحة 1 من 4 123 ... الأخيرةالأخيرة

المواضيع المتشابهه

  1. Repair Boot Samsung G532G Via Medusa Pro
    بواسطة .:: Mohamed Gsm ::. في المنتدى قسم Medusa Pro box / Octoplus Pro JTAG
    مشاركات: 24
    آخر مشاركة: منذ 2 يوم, 08:57
  2. دعم حصري REPAIR BOOT LG LMX510 MTK بــــ: medusa pro
    بواسطة dahmani med في المنتدى قسم Medusa Pro box / Octoplus Pro JTAG
    مشاركات: 28
    آخر مشاركة: 17-09-2020, 19:09
  3. Repair Dead Boot Samsung G361H BY Medusa Pro
    بواسطة .:: Mohamed Gsm ::. في المنتدى قسم Medusa Pro box / Octoplus Pro JTAG
    مشاركات: 5
    آخر مشاركة: 05-05-2020, 01:43
  4. تصليح بوت repair boot Condor_TB717L. على Medusa Pro
    بواسطة .:: Sebti _ Gsm ::. في المنتدى قسم Medusa Pro box / Octoplus Pro JTAG
    مشاركات: 16
    آخر مشاركة: 13-04-2020, 12:46
  5. تصليح بوت repair boot Condor_TGW_102L. على Medusa Pro
    بواسطة .:: Sebti _ Gsm ::. في المنتدى قسم Medusa Pro box / Octoplus Pro JTAG
    مشاركات: 7
    آخر مشاركة: 02-02-2020, 23:34

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •  
Powered by vBulletin® Copyright © 2020 vBulletin Solutions, Inc. All rights reserved.