الهاتف لم يقلع بعد الفلاش الخاطئ تم تجريب كتابة PIT + BL ولكن لم ينفع
احتاج دامب ان امكن او اي طريقة مجربة وشكرا
كود:
Meter: 37
now error solved after add 100ohm resistanc
but phone not power on
Welcome to Medusa Pro Software version 2.1.2.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 1
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
ERROR[001]: Can not connect. No target device present.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 2.0V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC QD63MB
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100514436334D4203EF0E9A3C9651
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QD63MB
Product revision : 0.3
Product serial number : (hex) EF0E9A3C
Manufacturing date : 09/2019
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 16384 Kbytes
Partition config : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 8Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : (0x02) 00000010
Boot bus width : x8 (sdr/ddr) bus width in boot operation mode
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/QD63MB_22_09_2020_19_10_34.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.1.2; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: boot_para (00002000, 00000800) 1024 KB
P02: para (00002800, 00000400) 512 KB
P03: efuse (00002C00, 00000400) 512 KB
P04: nvram (00003000, 00020000) 64 MB
P05: efs (00023000, 00004000) 8 MB
P06: sec_efs (00027000, 00004000) 8 MB
P07: bota (0002B000, 0000A800) 21 MB
P08: param (00035800, 00002000) 4 MB
P09: up_param (00037800, 00002000) 4 MB
P10: expdb (00039800, 0000A000) 20 MB
P11: frp (00043800, 00000800) 1024 KB
P12: nvcfg (00044000, 00010000) 32 MB
P13: nvdata (00054000, 00020000) 64 MB
P14: metadata (00074000, 00010000) 32 MB
P15: protect1 (00084000, 00004000) 8 MB
P16: protect2 (00088000, 00004000) 8 MB
P17: seccfg (0008C000, 00004000) 8 MB
P18: persist (00090000, 00018000) 48 MB
P19: persistent (000A8000, 00000400) 512 KB
P20: misc (000A8400, 00003C00) 7.5 MB
P21: sec1 (000AC000, 00001000) 2048 KB
P22: proinfo (000AD000, 00001800) 3072 KB
P23: md1img (000AE800, 00032000) 100 MB
P24: spmfw (000E0800, 00000800) 1024 KB
P25: scp1 (000E1000, 00000800) 1024 KB
P26: sspm_1 (000E1800, 00000800) 1024 KB
P27: lk (000E2000, 00001000) 2048 KB
P28: steady (000E3000, 00002000) 4 MB
P29: boot (000E5000, 00010000) 32 MB
P30: recovery (000F5000, 00010000) 32 MB
P31: dtbo (00105000, 00004000) 8 MB
P32: tee1 (00109000, 00003000) 6 MB
P33: vendor (0010C000, 000E0000) 448 MB
P34: product (001EC000, 000D8000) 432 MB
P35: system (002C4000, 006D8000) 3504 MB
P36: vbmeta (0099C000, 00004000) 8 MB
P37: cache (009A0000, 000C8000) 400 MB
P38: omr (00A68000, 00018000) 48 MB
P39: userdata (00A80000, 02FBC000) 23.87 GB
Backuping efs partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/QD63MB_efs_0x23000_0x4000_22_09_2020_19_10_34.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:03
SW: 2.1.2; FW: 1.24.
Backuping nvdata partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/QD63MB_nvdata_0x54000_0x20000_22_09_2020_19_10_34. bin file...
Reading. Please wait... Done.
Elapsed time 00:00:26
SW: 2.1.2; FW: 1.24.
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : 47c00000 bytes
Device sector size : 512 bytes
Partition offset : 2899968
Number of sectors : 7176192
Build ID : QP1A.190711.020
Display Build ID : QP1A.190711.020.A107FXXU5BTCB
Release ID : 10
Architecture ABI : armeabi-v7a
Architecture ABI2 : armeabi
Architecture ABI List : armeabi-v7a,armeabi
Build Description : a10sxx-user 10 QP1A.190711.020 A107FXXU5BTCB release-keys
---------------------------------------------------------------
Selected pit file: D:/flash/samsung/A107F/A107f Repir Boot By Elsoftgy/A107f Repir Boot By Elsoftgy/A10S_EUR_OPEN.pit
Open file "D:/flash/samsung/A107F/A107f Repir Boot By Elsoftgy/A107f Repir Boot By Elsoftgy/BL_A107FXXS5ASL3_CL17409491_QB28227036_REV00_user_ low_ship_MULTI_CERT.tar.md5".
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Writing PIT
Write data verification is enabled.
Writing. Please wait...
Switched to boot area partition 1.
Writing partition bootloader... from 0 to 182 Done.
Switched to user area.
Writing partition efuse... from 2C00 to 1 Done.
Writing partition param... from 35800 to 748 Done.
Writing partition up_param... from 37800 to 748 Done.
Writing partition lk... from E2000 to 673 Done.
Writing is finished.
SW: 2.1.2; FW: 1.24.
Disconnected.احتاج دامب ان امكن او اي طريقة مجربة وشكرا
