تم بعون الله. فورمات مع ازالة قفل الشاشة (OPPO A1K (CPH1923 على Medusa Pro
حمل الملف التالي مشاهدة المرفق Pin pattren Remove.rar. تابع الشرح على الصور
كود:
[LEFT][B][SIZE=2]Welcome to Medusa Pro Software version 2.1.2.
Started.
Reader #0: Generic EMV Smartcard Reader 0
Reader #1: Generic EMV Smartcard Reader 2
Please disconnect battery and USB cable.
[COLOR="#0000FF"]Model Settings:[/COLOR]
Interface : [COLOR="#008000"]eMMC[/COLOR]
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
[COLOR="#0000FF"]Connecting...[/COLOR]
Device : [COLOR="#008000"]Samsung eMMC QD63MB[/COLOR]
Page size : [COLOR="#008000"]512 B[/COLOR]
Block size : [COLOR="#008000"]512 B[/COLOR]
Block count : [COLOR="#008000"]61071360[/COLOR]
Size : [COLOR="#008000"]29.12 GB (29820.00 MB[/COLOR])
---------------------------------------------------------------
[COLOR="#0000FF"]CID Info[/COLOR]
CID : 150100514436334D4203F84C9BFFA63B
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QD63MB
Product revision : 0.3
Product serial number : (hex) F84C9BFF
Manufacturing date : 10/2019
---------------------------------------------------------------
[COLOR="#0000FF"]CSD Info[/COLOR]
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
[COLOR="#0000FF"]EXTCSD Info[/COLOR]
Revision 1.8 (for MMC v5.1)
Erase block size : [COLOR="#008000"]512 Kbytes[/COLOR]
Boot1 size : [COLOR="#008000"]4096 Kbytes[/COLOR]
Boot2 size : [COLOR="#008000"]4096 Kbytes[/COLOR]
RPMB size : [COLOR="#008000"]16384 Kbytes[/COLOR]
Partition config : [COLOR="#008000"](0x48) 01001000[/COLOR]
Boot partition enable : [COLOR="#008000"]Boot partition 1[/COLOR]
[COLOR="#0000FF"](Bus width = 8Bit)[/COLOR]
Boot ACK : [COLOR="#008000"]Boot acknowledge sent during boot operation Bit[/COLOR]
Boot bus conditions :[COLOR="#008000"] (0x02) 00000010[/COLOR]
Boot bus width : [COLOR="#008000"]x8 (sdr/ddr) bus width in boot operation mode[/COLOR]
Reset boot bus conditions : [COLOR="#008000"]Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)[/COLOR]
Boot mode : [COLOR="#008000"]Use single data rate + backward compatible timings in boot operation (default)[/COLOR]
RST_n function : [COLOR="#008000"](0x01) RST_n signal is permanently enabled[/COLOR]
Partitioning support : [COLOR="#008000"]Device supports partitioning features[/COLOR]
Enhanced attribute : [COLOR="#008000"]Device can have enhanced technological features in partitions and user data area.[/COLOR]
Max enhanced data size: [COLOR="#008000"]15261696 Kbytes[/COLOR]
Partitions attribute :[COLOR="#008000"] 0x0[/COLOR]
Part setting completed: [COLOR="#008000"]0x0[/COLOR]
GP partition 1 size :[COLOR="#008000"] 0 b[/COLOR]
GP partition 2 size :[COLOR="#008000"] 0 b[/COLOR]
GP partition 3 size : [COLOR="#008000"]0 b[/COLOR]
GP partition 4 size : [COLOR="#008000"]0 b[/COLOR]
Enhanced area size : [COLOR="#008000"](0x0) 0 b[/COLOR]
Enhanced area start : [COLOR="#008000"](0x0) 0 b[/COLOR]
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/QD63MB_08_09_2020_13_30_45.bin.
[COLOR="#008000"]Connect successful.[/COLOR]
---------------------------------------------------------------
[COLOR="#0000FF"]SW: 2.1.2; FW: 1.24.[/COLOR]
P00: GPT (00000000, 00000040) 32 KB
P01: boot_para (00000040, 00000800) 1024 KB
P02: recovery (00000840, 00010000) 32 MB
P03: para (00010840, 00000400) 512 KB
P04: opporeserve1 (00010C40, 00004000) 8 MB
P05: opporeserve2 (00014C40, 00020000) 64 MB
P06: opporeserve3 (00034C40, 00020000) 64 MB
P07: oppo_custom (00054C40, 00000800) 1024 KB
P08: expdb (00055440, 0000A000) 20 MB
P09: frp (0005F440, 00000800) 1024 KB
P10: vbmeta (0005FC40, 00004000) 8 MB
P11: nvcfg (00063C40, 00010000) 32 MB
P12: nvdata (00073C40, 00020000) 64 MB
P13: metadata (00093C40, 00010000) 32 MB
P14: protect1 (000A3C40, 00004000) 8 MB
P15: protect2 (000A7C40, 000043C0) 8.469 MB
P16: seccfg (000AC000, 00004000) 8 MB
P17: persist (000B0000, 00018000) 48 MB
P18: sec1 (000C8000, 00001000) 2048 KB
P19: proinfo (000C9000, 00001800) 3072 KB
P20: md1img (000CA800, 00032000) 100 MB
P21: spmfw (000FC800, 00000800) 1024 KB
P22: scp1 (000FD000, 00000800) 1024 KB
P23: scp2 (000FD800, 00000800) 1024 KB
P24: sspm_1 (000FE000, 00000800) 1024 KB
P25: sspm_2 (000FE800, 00000800) 1024 KB
P26: gz1 (000FF000, 00008000) 16 MB
P27: gz2 (00107000, 00008000) 16 MB
P28: nvram (0010F000, 00020000) 64 MB
P29: lk (0012F000, 00000800) 1024 KB
P30: lk2 (0012F800, 00000800) 1024 KB
P31: boot (00130000, 00010000) 32 MB
P32: logo (00140000, 00008000) 16 MB
P33: dtbo (00148000, 00008000) 16 MB
P34: tee1 (00150000, 00002800) 5 MB
P35: tee2 (00152800, 00005800) 11 MB
P36: odm (00158000, 00080000) 256 MB
P37: vendor (001D8000, 001CC000) 920 MB
P38: system (003A4000, 00960000) 4.688 GB
P39: cache (00D04000, 000D8000) 432 MB
P40: userdata (00DDC000, 02C447DF) 22.13 GB
P41: otp (03A207DF, 00015800) 43 MB
P42: flashinfo (03A35FDF, 00008000) 16 MB
Backuping nvdata partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/QD63MB_nvdata_0x73c40_0x20000_08_09_2020_13_30_45.bin file...
Reading. Please wait... [COLOR="#008000"]Done[/COLOR].
Elapsed time 00:00:25
[COLOR="#0000FF"]SW: 2.1.2; FW: 1.24.[/COLOR]
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : 47c00000 bytes
Device sector size : 512 bytes
Partition offset : 3817472
Number of sectors : 9830400
Build ID : [COLOR="#0000FF"]PPR1.180610.011[/COLOR]
Release ID : [COLOR="#0000FF"]9[/COLOR]
Architecture ABI :[COLOR="#0000FF"] arm64-v8a[/COLOR]
Architecture ABI List : [COLOR="#0000FF"]arm64-v8a,armeabi-v7a,armeabi[/COLOR]
Build Description : [COLOR="#0000FF"]full_oppo6762_18540-user 9 PPR1.180610.011 eng.root.20200604.213901 release-keys[/COLOR]
---------------------------------------------------------------Partition table has been found on device.
Partition table was not found in file C:/Users/Sebti Gsm/Desktop/oppo a1k/Pin pattren Remove/Factory reset keep Media.bin.
Partition table has been found on device.
Partition table was not found in file C:/Users/Sebti Gsm/Desktop/oppo a1k/Pin pattren Remove/Factory reset format data.bin.
Partition table has been found on device.
Don't forget to reconnect the device after writing to see changes.
Writting partitions. Please wait...
Writing partition para from C:/Users/Sebti Gsm/Desktop/oppo a1k/Pin pattren Remove/Factory reset keep Media.bin file...
ERROR[012]: Write error.
Attempting to read...
[COLOR="#008000"]Done.[/COLOR]
Writing is finished.
[COLOR="#0000FF"]SW: 2.1.2; FW: 1.24.[/COLOR]
Reconnect the device to see changes.
[/SIZE][/B][/LEFT]تمت العملية بنجاح
تم انشاء ملف SRF
من هنــــــــا ملف SRF لتصليح البوت
غير مجرب. على مسؤوليتك الخاصة
