السلام عليكم و رحمة الله تعالى و بركاته
تم بحمد الله حذف حساب جوجل و سحب الفلاشة على دونجل cm2 واجهة SPD ( تم التحويل الى صيغة PAC ) + سحب الفلاشة على بوكس miracle
CM2 DONGLE
انفو الهاتف
--------------------------------------------------------------------------
MIRACLE BOX
انفو الهاتف
تم بحمد الله حذف حساب جوجل و سحب الفلاشة على دونجل cm2 واجهة SPD ( تم التحويل الى صيغة PAC ) + سحب الفلاشة على بوكس miracle
CM2 DONGLE
انفو الهاتف
كود:
[LEFT][SIZE=4][COLOR=#0000FF]Operation : Check/Read Info [ v1.27 ][/COLOR][/SIZE]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
==== Wait for phone...
Phone found! [ 86 ]
Boot Ver : [SIZE=4][COLOR=#0000FF]SC7731 C[/COLOR][/SIZE]rev eMMC Loader v2.0
FLASH : eMMC Flash , Structure : Ok!
[SIZE=4][COLOR=#0000FF]Reading extended info[/COLOR][/SIZE] ...
Model Name : V2510
Model Brand : [SIZE=4][COLOR=#0000FF]WIKO[/COLOR][/SIZE]
Model Device: V2510
AndrVersion : [SIZE=4][COLOR=#0000FF]6.0[/COLOR][/SIZE]
BaseBand CPU: [SIZE=4][COLOR=#0000FF]V2510[/COLOR][/SIZE]
CompileDate : 10/16/2017 1:41:16 AM
Project Ver : MRA58K release-keys
Model Ext : [SIZE=4][COLOR=#0000FF]SUNNY2[/COLOR][/SIZE]
ExtraInfo : HWInfo not exists, normal phone
Elapsed: 00:00:30[/LEFT]بيانات حذف الحساب
كود:
[LEFT][SIZE=4][COLOR=#0000FF]Operation : Format File System / Reset Settings [ v1.27 ][/COLOR][/SIZE]
Settings : SmartFormat is On
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
==== Wait for phone...
Phone found! [ 86 ]
Boot Ver : [SIZE=4][COLOR=#0000FF]SC7731 C[/COLOR][/SIZE]rev eMMC Loader v2.0
Boot Ok!
FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!
eMMC phone detected! Will use 'Safe Format' mode!
Mount : /data
Size : 0x000000012A1F7000
State : 0x0001
Mount : /cache
Size : 0x0000000009600000
State : 0x0001
Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!
Android 5.x/6.x : Reset FRP Lock
[SIZE=4][COLOR=#0000FF]Reset Ok[/COLOR][/SIZE]!
[/LEFT]بيانات سحب الفلاشة
كود:
[LEFT][SIZE=4][COLOR=#0000FF]Operation : Read FullFlash [ v1.27 ][/COLOR][/SIZE]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
==== Wait for phone...
Phone found! [ 86 ]
Port Opened
Boot Ver : SC7731 Crev eMMC Loader v2.0
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_trunck_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : sysinfo.img
[Build Ok] : userdata.img
[SIZE=4][COLOR=#0000FF]AndroidInfo created[/COLOR][/SIZE]
Firmware Size : [SIZE=4][COLOR=#0000FF]2428 MiB[/COLOR][/SIZE]
Saved to : D:\WIKO SUNNY2 6.0 10162017 (CM2 DONGLE)\V2510_V2510_6.0_MRA58K_release-keys_SUNNY2\
Done!
Elapsed: 00:09:53[/LEFT]فيديو يوضح عملية السحب
[video=youtube_share;Vxui1tH0uXs]https://youtu.be/Vxui1tH0uXs[/video]
فلاشة خاصة بدونجل CM2 فقط
[video=youtube_share;Vxui1tH0uXs]https://youtu.be/Vxui1tH0uXs[/video]
فلاشة خاصة بدونجل CM2 فقط
فلاشة بصيغة PAC
--------------------------------------------------------------------------
MIRACLE BOX
انفو الهاتف
كود:
[LEFT] 1. Power Off Phone , Remove Battery, Insert Battery Back
2. Please Hold BootKey(UP and DOWN),Insert USB cable
3. Use Miracle Boot Key In cases Boot key not Find
4. Battery Should be Charged more then 50%
Scanning USB Serial port...
SU2Serial Port: COM86
Connecting to Phone,Wait..
Done.
Infor: SPRD3
Initialize [SIZE=4][COLOR=#0000FF]boot32[/COLOR][/SIZE]...
Being analyzed DATA...
id:MRA58K release-keys
version:[SIZE=4][COLOR=#0000FF]6.0[/COLOR][/SIZE]
hardware:[SIZE=4][COLOR=#0000FF]V2510_V1.0.0[/COLOR][/SIZE]
model:[SIZE=4][COLOR=#0000FF]SUNNY2[/COLOR][/SIZE]
brand:WIKO
manufacturer:[SIZE=4][COLOR=#0000FF]WIKO[/COLOR][/SIZE]
Done.[/LEFT]بيانات سحب الفلاشة
كود:
[LEFT] 1. Power Off Phone , Remove Battery, Insert Battery Back
2. Please Hold BootKey(UP and DOWN),Insert USB cable
3. Use Miracle Boot Key In cases Boot key not Find
4. Battery Should be Charged more then 50%
Scanning USB Serial port...
SU2Serial Port: COM86
Connecting to Phone,Wait..
Done.
Infor: SPRD3
Initialize boot32...
[SIZE=4][COLOR=#0000FF]reading,Wait[/COLOR][/SIZE]...
prodnv...
wfixnv1...
splloader...
wmodem...
wdsp...
wcnmodem...
logo...
fbootlogo...
boot...
recovery...
persist...
system...
cache...
Read Completed.
>>File save to: D:\WIKO SUNNY2 6.0 10162017 (MIRACLE BOX CRACK)\[SIZE=4][COLOR=#0000FF]SCxx_200830133031.mira[/COLOR][/SIZE][/LEFT]بالتوفيق للجميع
التعديل الأخير: