فلاش هاتف كوندور phq519

[Ahmedbio09]

السلام عليكم
اطلب المساعدة لفلاش هاتف كوندور PHQ519
رسالة الخطا
Selected firmware doesn't match to current HW or EMPTY battery! مع العلم انو البطارية مشحونة 100% ; و حملت نوعين من الفلاش بدون جدوى
Reconnect Power/Cable!




Operation : Flash [ v1.27 ]

======= Flash
Files set for flashing :
[ MCU ] : sw699_condor.pac
CRVersion : BP_R1.0.0
PacCPUinfo : SC77xx
PacVersion : PHQ519_125A_V0_0_5
File : fdl1.bin
File : fdl2.bin
File : nvitem.bin
File : nvitem_wcn.bin
File : u-boot-spl-16k.bin
File : SC7702_sc7731g_band128.bin
File : DSP_DM_G2.bin
File : SC8800G_x30g_wcn_dts_modem.bin
File : boot.img
File : recovery.img
File : system.img
File : userdata.img
File : boot_logo.bmp
File : prodnv.img
File : cache.img
File : u-boot.bin

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 14 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
PMTManager : Load 0x18 records
PMTManager : PMT Update Failed!!!
Selected firmware doesn't match to current HW or EMPTY battery!
Flashing terminated!

Elapsed: 00:00:00

Reconnect Power/Cable!


Loading : sw699_mmx.pac
CRVersion : BP_R1.0.0
PacCPUinfo : SC77xx
PacVersion : MMX_Q336_SW_V8.0.7_HW_V1.0.0_300515
FastCheck : 0x00430FB005

Loading files ...

File : fdl1.bin
File : fdl2.bin
File : nvitem.bin
File : nvitem_wcn.bin
File : u-boot-spl-16k.bin
File : SC7702_sc7731g_band128.bin
File : DSP_DM_G2.bin
File : SC8800G_x30g_wcn_dts_modem.bin
File : boot.img
File : recovery.img
File : system.img
File : userdata.img
File : boot_logo.bmp
File : prodnv.img
File : cache.img
File : u-boot.bin
File : SC7730_UMS.xml

Load Ok!

Operation : Flash [ v1.27 ]

======= Flash
Files set for flashing :
[ MCU ] : sw699_mmx.pac
CRVersion : BP_R1.0.0
PacCPUinfo : SC77xx
PacVersion : MMX_Q336_SW_V8.0.7_HW_V1.0.0_300515
File : fdl1.bin
File : fdl2.bin
File : nvitem.bin
File : nvitem_wcn.bin
File : u-boot-spl-16k.bin
File : SC7702_sc7731g_band128.bin
File : DSP_DM_G2.bin
File : SC8800G_x30g_wcn_dts_modem.bin
File : boot.img
File : recovery.img
File : system.img
File : userdata.img
File : boot_logo.bmp
File : prodnv.img
File : cache.img
File : u-boot.bin

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 14 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
PMTManager : Load 0x18 records
PMTManager : PMT Update Failed!!!
Selected firmware doesn't match to current HW or EMPTY battery!
Flashing terminated!

Elapsed: 00:00:00

Reconnect Power/Cable!