R3 Tool Pro

النتائج 1 إلى 6 من 6

الموضوع: مشكلة الاقلاع 6500

  1. #1
    deihmi غير متواجد حالياً
    عضو اساسي
    تاريخ التسجيل
    Sep 2012
    المشاركات
    836
    معدل تقييم المستوى
    21
    شكراً
    1
    تم شكره
    1,347

    افتراضي مشكلة الاقلاع 6500

    السلام عليكم ورحمة الله وبركاتة جالي هاتف نوكيا 6500متوقف على نوكيا ويطفى عملت له فلاش اكتر من 5مرات على السيكلون وعلى التورنادو تفلش عادي لاكن يشعل نوكيا ويطفى ممكن حد يعطينا حل وجازاكم الله خير

    كود:
    Handling device: [Cyclone Team], [Cyclone Bootloader], [Platform: Classic]
    Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic]
    Initializing box...
    Box Firmware: Cyclone Main Application v02.11, (Nov 10 2012 00:51:46,  gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C)  KarwosSoft 2012
    Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
    Box Serial Number: C000800B
    HW Revision: C, Suitable for: Production, Case: 2011 - New Casing, MCU Manufacture Time: 2011, wk01
    Initializing security card...
    Card Serial Number: D00C030B
    Card Firmware Revision: 010A
    Card is activated
    Box is activated
    Started box selftests procedure
    USB Voltage	5,00v	PASSED
    MCU Voltage	3,27v	PASSED
    Core Voltage	1,75v	PASSED
    VBAT Voltage	0,01v	PASSED
    VBAT Voltage	4,82v	PASSED
    Box VPP disabled
    VPP Voltage	0,04v	PASSED
    Internal Box VPP Enabled
    VPP Voltage	4,83v	PASSED
    Box VPP disabled
    VPP Voltage	0,02v	PASSED
    External Box VPP Enabled
    VPP Voltage	0,04v	FAILED - IGNORED - Probably power supply is not connected
    Box VPP disabled
    All box selftests passed!
    Super DCT4 Activation: TRUE
    XGold/Blackberry Service Running, Counter: 99
    Avaiable Physical Memory: 1.1008GB
    Avaiable Virtual Memory: 1.804GB
    Avaiable Pagefile: 3.1023GB
    Initializing FBUS...
    All initialized - Ready to work
    Booting CMT...
    CMT_SYSTEM_ASIC_ID:	000000010000022600010006010C192101003000
    CMT_EM_ASIC_ID:		00000295
    CMT_EM_ASIC_ID:		00000B22
    CMT_PUBLIC_ID:		0C300018839B465038E5168D0C8EA09CC1B569D4
    CMT_ASIC_MODE_ID:	00
    CMT_ROOT_KEY_HASH:	BAF3A9C3DBFA8454937DB77F2B8852B1
    CMT_BOOT_ROM_CRC:	273F6D55
    CMT_SECURE_ROM_CRC:	DFAAF68F
    CMT Ready!
    Searching for BootCode: DualLine 32Bit
    RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using OLD BB5 FLASHING PROTOCOL
    If software STUCK HERE with box TX LED lit, that means:
    1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
    2. Your cable is not TX2 Enabled!
    3. Transmission error occured, try again
    In either cases, you need to reconnect your box from USB.
    FlashChip[0,CMT]: 0x0001003F00008A21, AMD, NOR
    Flash*******[0,CMT]: 00000000000000000000000000000000, NOR
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x0001003F (AMD), Size: 64MBytes, VPP: 9V
    RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
    Flashbus Write baud set to 2.0Mbits
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: A69838E8C5F20150E64E2E6E06DE6E50B26B593F
    APE Boot skipped on user request
    Flashbus Write baud set to 5.0Mbits
    Restarting MCU...
    Processing pre flash tasks...
    Backing up RPL...
    RPL Creation started...
    Processing CMT Part...
    Proceeding with Recovery Mode...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID:	000000010000022600010006010C192101003000
    CMT_EM_ASIC_ID:		00000295
    CMT_EM_ASIC_ID:		00000B22
    CMT_PUBLIC_ID:		0C300018839B465038E5168D0C8EA09CC1B569D4
    CMT_ASIC_MODE_ID:	00
    CMT_ROOT_KEY_HASH:	BAF3A9C3DBFA8454937DB77F2B8852B1
    CMT_BOOT_ROM_CRC:	273F6D55
    CMT_SECURE_ROM_CRC:	DFAAF68F
    CMT Ready!
    Searching for BootCode: DualLine 32Bit
    RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using OLD BB5 FLASHING PROTOCOL
    If software STUCK HERE with box TX LED lit, that means:
    1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
    2. Your cable is not TX2 Enabled!
    3. Transmission error occured, try again
    In either cases, you need to reconnect your box from USB.
    FlashChip[0,CMT]: 0x0001003F00008A21, AMD, NOR
    Flash*******[0,CMT]: 00000000000000000000000000000000, NOR
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x0001003F (AMD), Size: 64MBytes, VPP: 9V
    RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
    Flashbus Write baud set to 2.0Mbits
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: A69838E8C5F20150E64E2E6E06DE6E50B26B593F
    APE Subsystem Not Found
    Flashbus Write baud set to 5.0Mbits
    NPC Backup stored in "0C300018839B465038E5168D0C8EA09CC1B569D4_30052013  _204314.NPC.CMT.crt"
    Recovery Mode Failed, storing Certificates Only
    Booting CMT...
    CMT_SYSTEM_ASIC_ID:	000000010000022600010006010C192101003000
    CMT_EM_ASIC_ID:		00000295
    CMT_EM_ASIC_ID:		00000B22
    CMT_PUBLIC_ID:		0C300018839B465038E5168D0C8EA09CC1B569D4
    CMT_ASIC_MODE_ID:	00
    CMT_ROOT_KEY_HASH:	BAF3A9C3DBFA8454937DB77F2B8852B1
    CMT_BOOT_ROM_CRC:	273F6D55
    CMT_SECURE_ROM_CRC:	DFAAF68F
    CMT Ready!
    Searching for BootCode: DualLine 32Bit
    RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using OLD BB5 FLASHING PROTOCOL
    If software STUCK HERE with box TX LED lit, that means:
    1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
    2. Your cable is not TX2 Enabled!
    3. Transmission error occured, try again
    In either cases, you need to reconnect your box from USB.
    FlashChip[0,CMT]: 0x0001003F00008A21, AMD, NOR
    Flash*******[0,CMT]: 00000000000000000000000000000000, NOR
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x0001003F (AMD), Size: 64MBytes, VPP: 9V
    RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
    Flashbus Write baud set to 2.0Mbits
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: A69838E8C5F20150E64E2E6E06DE6E50B26B593F
    APE Subsystem Not Found
    Flashbus Write baud set to 5.0Mbits
    Storing NPC...
    Storing CCC...
    Storing HWC...
    CMT VARIANT Not Found
    CMT PARTNERC Not Found
    Restoring from Recovery Mode...
    Restored from Recovery Mode OK
    Restarting MCU...
    RPL Saved OK
    RPL backup thread finished, continuing...
    Pre flash tasks finished, continuing...
    Processing rm240__10.00.mcusw (CMT)...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID:	000000010000022600010006010C192101003000
    CMT_EM_ASIC_ID:		00000295
    CMT_EM_ASIC_ID:		00000B22
    CMT_PUBLIC_ID:		0C300018839B465038E5168D0C8EA09CC1B569D4
    CMT_ASIC_MODE_ID:	00
    CMT_ROOT_KEY_HASH:	BAF3A9C3DBFA8454937DB77F2B8852B1
    CMT_BOOT_ROM_CRC:	273F6D55
    CMT_SECURE_ROM_CRC:	DFAAF68F
    CMT Ready!
    rm240__10.00.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
    Searching for BootCode: DualLine 32Bit
    RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using OLD BB5 FLASHING PROTOCOL
    If software STUCK HERE with box TX LED lit, that means:
    1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
    2. Your cable is not TX2 Enabled!
    3. Transmission error occured, try again
    In either cases, you need to reconnect your box from USB.
    FlashChip[0,CMT]: 0x0001003F00008A21, AMD, NOR
    Flash*******[0,CMT]: 00000000000000000000000000000000, NOR
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x0001003F (AMD), Size: 64MBytes, VPP: 9V
    RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
    Flashbus Write baud set to 2.0Mbits
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: A69838E8C5F20150E64E2E6E06DE6E50B26B593F
    Flashbus Write baud set to 5.0Mbits
    Started group flash erase
    EraseArea[0,CMT]: 0x00000000-0x0001FFFF, NOR
    EraseArea[0,CMT]: 0x00040000-0x000BFFFF, NOR
    EraseArea[0,CMT]: 0x000C0000-0x0013FFFF, NOR
    EraseArea[0,CMT]: 0x01480000-0x015FFFFF, NOR
    EraseArea[0,CMT]: 0x00140000-0x0147FFFF, NOR
    Waiting 320s for erasure finish...
    Erase taken 73.866s
    Writing all blocks...
    Initializing TurboCache...
    TurboCache Loaded!
    Writing CMT NOLO Certificate...
    Writing CMT KEYS Certificate...
    Writing CMT PRIMAPP Certificate...
    Writing CMT PASUBTOC Certificate...
    Writing CMT PAPUBKEYS Certificate...
    Writing CMT UPDAPP Certificate...
    Writing CMT DSP0 Certificate...
    Writing CMT MCUSW Certificate...
    Programming Status OK!
    All blocks written OK! Time taken 94.818s
    Flashing Speed: 1804,05 kBit/S
    Restarting MCU...
    Processing rm240__10.00.mcusw (APE)...
    Processing rm240__10.00.ppm_m1 (CMT)...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID:	000000010000022600010006010C192101003000
    CMT_EM_ASIC_ID:		00000295
    CMT_EM_ASIC_ID:		00000B22
    CMT_PUBLIC_ID:		0C300018839B465038E5168D0C8EA09CC1B569D4
    CMT_ASIC_MODE_ID:	00
    CMT_ROOT_KEY_HASH:	BAF3A9C3DBFA8454937DB77F2B8852B1
    CMT_BOOT_ROM_CRC:	273F6D55
    CMT_SECURE_ROM_CRC:	DFAAF68F
    CMT Ready!
    rm240__10.00.ppm_m1, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
    Searching for BootCode: DualLine 32Bit
    RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using OLD BB5 FLASHING PROTOCOL
    If software STUCK HERE with box TX LED lit, that means:
    1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
    2. Your cable is not TX2 Enabled!
    3. Transmission error occured, try again
    In either cases, you need to reconnect your box from USB.
    FlashChip[0,CMT]: 0x0001003F00008A21, AMD, NOR
    Flash*******[0,CMT]: 00000000000000000000000000000000, NOR
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x0001003F (AMD), Size: 64MBytes, VPP: 9V
    RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
    Flashbus Write baud set to 2.0Mbits
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: A69838E8C5F20150E64E2E6E06DE6E50B26B593F
    Flashbus Write baud set to 5.0Mbits
    Started group flash erase
    EraseArea[0,CMT]: 0x01600000-0x01CBFFFF, NOR
    Waiting 320s for erasure finish...
    Erase taken 20.93s
    Writing all blocks...
    Initializing TurboCache...
    TurboCache Loaded!
    Programming Status OK!
    All blocks written OK! Time taken 25.849s
    Flashing Speed: 1682,84 kBit/S
    Restarting MCU...
    Processing rm240__10.00.ppm_m1 (APE)...
    Processing rm240__10.00_ISM_006.image_1_eg_brown (CMT)...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID:	000000010000022600010006010C192101003000
    CMT_EM_ASIC_ID:		00000295
    CMT_EM_ASIC_ID:		00000B22
    CMT_PUBLIC_ID:		0C300018839B465038E5168D0C8EA09CC1B569D4
    CMT_ASIC_MODE_ID:	00
    CMT_ROOT_KEY_HASH:	BAF3A9C3DBFA8454937DB77F2B8852B1
    CMT_BOOT_ROM_CRC:	273F6D55
    CMT_SECURE_ROM_CRC:	DFAAF68F
    CMT Ready!
    rm240__10.00_ISM_006.image_1_eg_brown, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
    Searching for BootCode: DualLine 32Bit
    RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using OLD BB5 FLASHING PROTOCOL
    If software STUCK HERE with box TX LED lit, that means:
    1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
    2. Your cable is not TX2 Enabled!
    3. Transmission error occured, try again
    In either cases, you need to reconnect your box from USB.
    FlashChip[0,CMT]: 0x0001003F00008A21, AMD, NOR
    Flash*******[0,CMT]: 00000000000000000000000000000000, NOR
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x0001003F (AMD), Size: 64MBytes, VPP: 9V
    RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
    Flashbus Write baud set to 2.0Mbits
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: A69838E8C5F20150E64E2E6E06DE6E50B26B593F
    Flashbus Write baud set to 5.0Mbits
    Started group flash erase
    EraseArea[0,CMT]: 0x01FC0000-0x03F9FFFF, NOR
    EraseArea[0,CMT]: 0x01CC0000-0x01FBFFFF, NOR
    Waiting 320s for erasure finish...
    Erase taken 64.179s
    Writing all blocks...
    Initializing TurboCache...
    TurboCache Loaded!
    Programming Status OK!
    All blocks written OK! Time taken 49.687s
    Flashing Speed: 1859,30 kBit/S
    Restarting MCU...
    Processing rm240__10.00_ISM_006.image_1_eg_brown (APE)...
    All images processed OK! Processing post flash tasks...
    Setting Factory Defaults...
    Factory defaults OK
    Reading info...
    Failed to read info -> Phone not detected
    Read info thread finished, continuing...
    Post flash tasks finished!
    Flashing successfully finished

  2. #2
    hasni غير متواجد حالياً
    :: مراقب ::
    قسم SonyEricsson
    قسم Se-Tool
    تاريخ التسجيل
    Mar 2012
    الدولة
    الشـــــــــ02ــــــلف
    المشاركات
    4,510
    معدل تقييم المستوى
    190
    شكراً
    18,928
    تم شكره
    16,305

    افتراضي

    100/100 اعطه اصدار rm240__12.35 .

  3. #3
    deihmi غير متواجد حالياً
    عضو اساسي
    تاريخ التسجيل
    Sep 2012
    المشاركات
    836
    معدل تقييم المستوى
    21
    شكراً
    1
    تم شكره
    1,347

    افتراضي

    شكرا خويا حسني سوف اعلمكم بالنتيجة

  4. #4
    hasni غير متواجد حالياً
    :: مراقب ::
    قسم SonyEricsson
    قسم Se-Tool
    تاريخ التسجيل
    Mar 2012
    الدولة
    الشـــــــــ02ــــــلف
    المشاركات
    4,510
    معدل تقييم المستوى
    190
    شكراً
    18,928
    تم شكره
    16,305

    افتراضي

    الفلاش في هذا الموضوع

    الروابط تظهر للاعضاء فقط

  5. #5
    deihmi غير متواجد حالياً
    عضو اساسي
    تاريخ التسجيل
    Sep 2012
    المشاركات
    836
    معدل تقييم المستوى
    21
    شكراً
    1
    تم شكره
    1,347

    افتراضي رد: مشكلة الاقلاع 6500

    السلام عليكم خويا حسني جربت القلاشة RM443 12.35 لاكن المشكلة كما هي شاشة بيضاء ويطفى

    Handling device: [Cyclone Team], [Cyclone Bootloader], [Platform: Classic]
    Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic]
    Initializing box...
    Box Firmware: Cyclone Main Application v02.11, (Nov 10 2012 00:51:46, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2012
    Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
    Box Serial Number: C000800B
    HW Revision: C, Suitable for: Production, Case: 2011 - New Casing, MCU Manufacture Time: 2011, wk01
    Initializing security card...
    Card Serial Number: D00C030B
    Card Firmware Revision: 010A
    Card is activated
    Box is activated
    Started box selftests procedure
    USB Voltage 4,99v PASSED
    MCU Voltage 3,28v PASSED
    Core Voltage 1,76v PASSED
    VBAT Voltage 0,68v PASSED
    VBAT Voltage 4,97v PASSED
    Box VPP disabled
    VPP Voltage 0,00v PASSED
    Internal Box VPP Enabled
    VPP Voltage 4,88v PASSED
    Box VPP disabled
    VPP Voltage 0,04v PASSED
    External Box VPP Enabled
    VPP Voltage 0,02v FAILED - IGNORED - Probably power supply is not connected
    Box VPP disabled
    All box selftests passed!
    Super DCT4 Activation: TRUE
    XGold/Blackberry Service Running, Counter: 99
    Avaiable Physical Memory: 1.1023GB
    Avaiable Virtual Memory: 1.821GB
    Avaiable Pagefile: 3.1023GB
    Initializing FBUS...
    All initialized - Ready to work
    Retrieving Variants for Product RM-240 - wait...
    5 Variants Retrieved
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101003000
    CMT_EM_ASIC_ID: 00000295
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 0C300018839B465038E5168D0C8EA09CC1B569D4
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
    CMT_BOOT_ROM_CRC: 273F6D55
    CMT_SECURE_ROM_CRC: DFAAF68F
    CMT Ready!
    Searching for BootCode: DualLine 32Bit
    RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using OLD BB5 FLASHING PROTOCOL
    If software STUCK HERE with box TX LED lit, that means:
    1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
    2. Your cable is not TX2 Enabled!
    3. Transmission error occured, try again
    In either cases, you need to reconnect your box from USB.
    FlashChip[0,CMT]: 0x0001003F00008A21, AMD, NOR
    Flash*******[0,CMT]: 00000000000000000000000000000000, NOR
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x0001003F (AMD), Size: 64MBytes, VPP: 9V
    RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
    Flashbus Write baud set to 2.0Mbits
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: A69838E8C5F20150E64E2E6E06DE6E50B26B593F
    APE Boot skipped on user request
    Flashbus Write baud set to 5.0Mbits
    Restarting MCU...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101003000
    CMT_EM_ASIC_ID: 00000295
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 0C300018839B465038E5168D0C8EA09CC1B569D4
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
    CMT_BOOT_ROM_CRC: 273F6D55
    CMT_SECURE_ROM_CRC: DFAAF68F
    CMT Ready!
    Searching for BootCode: DualLine 32Bit
    RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using OLD BB5 FLASHING PROTOCOL
    If software STUCK HERE with box TX LED lit, that means:
    1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
    2. Your cable is not TX2 Enabled!
    3. Transmission error occured, try again
    In either cases, you need to reconnect your box from USB.
    FlashChip[0,CMT]: 0x0001003F00008A21, AMD, NOR
    Flash*******[0,CMT]: 00000000000000000000000000000000, NOR
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x0001003F (AMD), Size: 64MBytes, VPP: 9V
    RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
    Flashbus Write baud set to 2.0Mbits
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: A69838E8C5F20150E64E2E6E06DE6E50B26B593F
    APE Boot skipped on user request
    Flashbus Write baud set to 5.0Mbits
    Restarting MCU...
    Processing pre flash tasks...
    Backing up RPL...
    RPL Creation started...
    Processing CMT Part...
    Storing Product Code...
    Failed to Create RPL from phone -> Failed to read Product Code, Phone is not responding
    RPL backup thread finished, continuing...
    Pre flash tasks finished, continuing...
    Processing rm240__12.35.mcusw (CMT)...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101003000
    CMT_EM_ASIC_ID: 00000295
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 0C300018839B465038E5168D0C8EA09CC1B569D4
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
    CMT_BOOT_ROM_CRC: 273F6D55
    CMT_SECURE_ROM_CRC: DFAAF68F
    CMT Ready!
    rm240__12.35.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
    Searching for BootCode: DualLine 32Bit
    RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using OLD BB5 FLASHING PROTOCOL
    If software STUCK HERE with box TX LED lit, that means:
    1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
    2. Your cable is not TX2 Enabled!
    3. Transmission error occured, try again
    In either cases, you need to reconnect your box from USB.
    FlashChip[0,CMT]: 0x0001003F00008A21, AMD, NOR
    Flash*******[0,CMT]: 00000000000000000000000000000000, NOR
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x0001003F (AMD), Size: 64MBytes, VPP: 9V
    RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
    Flashbus Write baud set to 2.0Mbits
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: A69838E8C5F20150E64E2E6E06DE6E50B26B593F
    Flashbus Write baud set to 5.0Mbits
    Started group flash erase
    EraseArea[0,CMT]: 0x00000000-0x0001FFFF, NOR
    EraseArea[0,CMT]: 0x00040000-0x000BFFFF, NOR
    EraseArea[0,CMT]: 0x000C0000-0x0013FFFF, NOR
    EraseArea[0,CMT]: 0x01480000-0x015FFFFF, NOR
    EraseArea[0,CMT]: 0x00140000-0x0147FFFF, NOR
    Waiting 320s for erasure finish...
    Erase taken 74.538s
    Writing all blocks...
    Initializing TurboCache...
    TurboCache Loaded!
    Writing CMT NOLO Certificate...
    Writing CMT KEYS Certificate...
    Writing CMT PRIMAPP Certificate...
    Writing CMT PASUBTOC Certificate...
    Writing CMT PAPUBKEYS Certificate...
    Writing CMT UPDAPP Certificate...
    Writing CMT DSP0 Certificate...
    Writing CMT MCUSW Certificate...
    Programming Status OK!
    All blocks written OK! Time taken 94.786s
    Flashing Speed: 1804,85 kBit/S
    Restarting MCU...
    Processing rm240__12.35.mcusw (APE)...
    Processing rm240__12.35.ppm_a (CMT)...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101003000
    CMT_EM_ASIC_ID: 00000295
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 0C300018839B465038E5168D0C8EA09CC1B569D4
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
    CMT_BOOT_ROM_CRC: 273F6D55
    CMT_SECURE_ROM_CRC: DFAAF68F
    CMT Ready!
    rm240__12.35.ppm_a, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
    Searching for BootCode: DualLine 32Bit
    RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using OLD BB5 FLASHING PROTOCOL
    If software STUCK HERE with box TX LED lit, that means:
    1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
    2. Your cable is not TX2 Enabled!
    3. Transmission error occured, try again
    In either cases, you need to reconnect your box from USB.
    FlashChip[0,CMT]: 0x0001003F00008A21, AMD, NOR
    Flash*******[0,CMT]: 00000000000000000000000000000000, NOR
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x0001003F (AMD), Size: 64MBytes, VPP: 9V
    RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
    Flashbus Write baud set to 2.0Mbits
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: A69838E8C5F20150E64E2E6E06DE6E50B26B593F
    Flashbus Write baud set to 5.0Mbits
    Started group flash erase
    EraseArea[0,CMT]: 0x01600000-0x01CBFFFF, NOR
    Waiting 320s for erasure finish...
    Erase taken 23.26s
    Writing all blocks...
    Initializing TurboCache...
    TurboCache Loaded!
    Programming Status OK!
    All blocks written OK! Time taken 31.278s
    Flashing Speed: 1705,91 kBit/S
    Restarting MCU...
    Processing rm240__12.35.ppm_a (APE)...
    Processing rm240__12.35_ism_015.image_a_3_se_silver_v2 (CMT)...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101003000
    CMT_EM_ASIC_ID: 00000295
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 0C300018839B465038E5168D0C8EA09CC1B569D4
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
    CMT_BOOT_ROM_CRC: 273F6D55
    CMT_SECURE_ROM_CRC: DFAAF68F
    CMT Ready!
    rm240__12.35_ism_015.image_a_3_se_silver_v2, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
    Searching for BootCode: DualLine 32Bit
    RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using OLD BB5 FLASHING PROTOCOL
    If software STUCK HERE with box TX LED lit, that means:
    1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
    2. Your cable is not TX2 Enabled!
    3. Transmission error occured, try again
    In either cases, you need to reconnect your box from USB.
    FlashChip[0,CMT]: 0x0001003F00008A21, AMD, NOR
    Flash*******[0,CMT]: 00000000000000000000000000000000, NOR
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x0001003F (AMD), Size: 64MBytes, VPP: 9V
    RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
    Flashbus Write baud set to 2.0Mbits
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: A69838E8C5F20150E64E2E6E06DE6E50B26B593F
    Flashbus Write baud set to 5.0Mbits
    Started group flash erase
    EraseArea[0,CMT]: 0x01FC0000-0x03F9FFFF, NOR
    EraseArea[0,CMT]: 0x01CC0000-0x01FBFFFF, NOR
    Waiting 320s for erasure finish...
    Erase taken 66.301s
    Writing all blocks...
    Initializing TurboCache...
    TurboCache Loaded!
    Programming Status OK!
    All blocks written OK! Time taken 50.92s
    Flashing Speed: 1886,19 kBit/S
    Restarting MCU...
    Processing rm240__12.35_ism_015.image_a_3_se_silver_v2 (APE)...
    All images processed OK! Processing post flash tasks...
    Setting Factory Defaults...
    Factory defaults OK
    Reading info...
    Failed to read info -> Phone not detected
    Read info thread finished, continuing...
    Post flash tasks finished!
    Flashing successfully finished!

  6. #6
    salah eddine غير متواجد حالياً
    عضو نشط
    تاريخ التسجيل
    Mar 2013
    المشاركات
    215
    معدل تقييم المستوى
    8
    شكراً
    225
    تم شكره
    346

    افتراضي رد: مشكلة الاقلاع 6500

    اخي ممكن تجرب نزع الايسي الموضح في الصورة
    واعلامنا بالنتيجة
    الصور المرفقة الصور المرفقة

المواضيع المتشابهه

  1. c3300k مشكلة عدم الاقلاع هل من حل ؟؟؟؟؟؟؟؟
    بواسطة djamelgsm في المنتدى قسم صيانة السامسونج ( Samsung )
    مشاركات: 10
    آخر مشاركة: 01-30-2014, 23:22
  2. مشكلة في الاقلاع c5212
    بواسطة jezif في المنتدى قسم صيانة السامسونج ( Samsung )
    مشاركات: 5
    آخر مشاركة: 01-05-2014, 21:15
  3. مشكلة الاقلاع x1-01
    بواسطة deihmi في المنتدى قسم صيانة النوكيا ( Nokia )
    مشاركات: 8
    آخر مشاركة: 07-08-2013, 20:41
  4. مشكلة الاقلاع a230
    بواسطة deihmi في المنتدى قسم صيانة ال جى ( LG )
    مشاركات: 2
    آخر مشاركة: 06-01-2013, 13:47
  5. مشكلة في نوكيا 6500 rm-240
    بواسطة Hamza42 في المنتدى قسم سارس بوكس Saras Boxes
    مشاركات: 14
    آخر مشاركة: 07-16-2012, 19:19

الكلمات الدلالية لهذا الموضوع

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •  
الأرشيف | الاتصال بنا | Privacy-Policy