Welcome to Octoplus Huawei Software v.‪1.1.6‬




To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode




To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode




To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'




Found COM ports:
1: COM1 Communications Port
2: COM5 USB Serial Port




2020-04-03 11:33:09 GMT -------------------------------------------------
Starting Reset FRP (Fastboot Mode)
Searching Fastboot devices...




Device Model: ‪AGS-W09‬
System: ‪AGS-W09C199B276‬
IMEI A: ‪4JPNU1912510214‬
S/N: ‪4JPNU19125102148‬
Connecting to server...
Writing Reset FRP data...




Reset FRP (Fastboot Mode) done.
Performed by ‪1.1.6‬ Software version.