تصليح بوت Repair boot Xpower-2__M320

.:: Sebti _ Gsm ::.

:: مراقب قسم بوكسات الجيتاق JTAG ::
إنضم
30 ديسمبر 2015
المشاركات
1,669
مستوى التفاعل
2,934
النقاط
113
الإقامة
Ghardaïa


تم بعون الله تصليح بوت LG Xpower-2__M320 على Medusa Pro

اولا الجهاز فقد البوت بعد تمرير Firmware غير متوافقة
كان يحمل هذا الاصدار SW version: LGM320AT-00-V11w-GLOBAL-COM-FEB-05-2019+0
وبعد تمرير Firmware: LGM320AT-00-V10e-AME-XX-JUN-12-2018+0.oct "فقد الوعي" فقد البوت.



تانيا: بعد فتج الهاتف وتلحيم النقاط وتحقيق الاتصال وتمرير الملف الموجود في سيبورت Medusa Pro عن طريق Smart repair
يمر الملف بنجاح لاكن الهاتف بقي "مغمى عليه" "الهاتف مدعوم على Medusa Pro"

كود:
[LEFT]Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Brand     : LG
Model     : M320
SRF       : C:/Program Files (x86)/Medusa Pro Software/SRF/LG_M320_EMMC.srf
Voltage   : 1.8V
Bus Mode  : 1 bit
Bus speed : Auto

Connecting...
Device       : Samsung eMMC QE63MB
Page size    : 512 B
Block size   : 512 B
Block count  : 30535680
Size         : 14.56 GB (14910.00 MB)
---------------------------------------------------------------
CID Info

CID                   : 150100514536334D42033C6C904825F7
Manufacturer ID       : 0X15
Device/BGA            : BGA (Discrete embedded)
OEM/Application ID    : 0X00
Product name          : QE63MB
Product revision      : 0.3
Product serial number : (hex) 3C6C9048
Manufacturing date    : 02/2018
---------------------------------------------------------------
CSD Info

CSD                   : D02701320F5903FFF6DBFFEF8E40400D
CSD structure         : CSD version No. 1.2
SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                        4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed            : 26 MHz
READ block length     : 512 Bytes
WP group enable       : YES
PERM_WRITE_PROTECT    : NO
TMP_WRITE_PROTECT     : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.8 (for MMC v5.1)
Erase block size      : 512 Kbytes
Boot1 size            : 4096 Kbytes
Boot2 size            : 4096 Kbytes
RPMB size             : 4096 Kbytes

Partition config      : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK              : Boot acknowledge sent during boot operation Bit

Boot bus conditions   : (0x00) 00000000
Boot bus width        : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode             : Use single data rate + backward compatible timings in boot operation (default)

RST_n function        : (0x01) RST_n signal is permanently enabled

Partitioning support  : Device supports partitioning features
Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7626752 Kbytes
Partitions attribute  : 0x0
Part setting completed: 0x0
GP partition 1 size   : 0 b
GP partition 2 size   : 0 b
GP partition 3 size   : 0 b
GP partition 4 size   : 0 b
Enhanced area size    : (0x0) 0 b
Enhanced area start   : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/QE63MB_24_02_2020_14_07_44.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.0.3; FW: 1.24.
P00: GPT              (00000000, 00000400)	512 KB
P01: proinfo          (00000400, 00001800)	3072 KB
P02: spare1           (00001C00, 00002400)	4.5 MB
P03: misc2            (00004000, 00004000)	8 MB
P04: ftm              (00008000, 00004000)	8 MB
P05: nvram            (0000C000, 00002800)	5 MB
P06: spare2           (0000E800, 00001800)	3072 KB
P07: protect1         (00010000, 00004000)	8 MB
P08: protect2         (00014000, 00004000)	8 MB
P09: lk               (00018000, 00000800)	1024 KB
P10: lk2              (00018800, 00000800)	1024 KB
P11: laf              (00019000, 0000E000)	28 MB
P12: para             (00027000, 00000400)	512 KB
P13: boot             (00027400, 00008C00)	17.5 MB
P14: recovery         (00030000, 00009800)	19 MB
P15: recoverybak      (00039800, 00009800)	19 MB
P16: logo             (00043000, 00004000)	8 MB
P17: lo_bak_go        (00047000, 00004000)	8 MB
P18: expdb            (0004B000, 00005000)	10 MB
P19: seccfg           (00050000, 00004000)	8 MB
P20: oemkeystore      (00054000, 00004000)	8 MB
P21: secro            (00058000, 00003000)	6 MB
P22: spare3           (0005B000, 00001000)	2048 KB
P23: keystore         (0005C000, 00004000)	8 MB
P24: tee1             (00060000, 00002800)	5 MB
P25: tee2             (00062800, 00002800)	5 MB
P26: eksst            (00065000, 00000400)	512 KB
P27: encrypt          (00065400, 00000400)	512 KB
P28: spare4           (00065800, 00002800)	5 MB
P29: persist_lg       (00068000, 00004000)	8 MB
P30: mpt              (0006C000, 0000B000)	22 MB
P31: lgfota           (00077000, 00005000)	10 MB
P32: rct              (0007C000, 00000800)	1024 KB
P33: factory          (0007C800, 0001C000)	56 MB
P34: efuse            (00098800, 00000400)	512 KB
P35: spare5           (00098C00, 00003400)	6.5 MB
P36: persist          (0009C000, 00018000)	48 MB
P37: nvcfg            (000B4000, 00004000)	8 MB
P38: nvdata           (000B8000, 00010000)	32 MB
P39: metadata         (000C8000, 00010000)	32 MB
P40: md1img           (000D8000, 0000C000)	24 MB
P41: md1dsp           (000E4000, 00002000)	4 MB
P42: md1arm7          (000E6000, 00001800)	3072 KB
P43: md3img           (000E7800, 00002800)	5 MB
P44: cust             (000EA000, 00032000)	100 MB
P45: frp              (0011C000, 00004000)	8 MB
P46: system           (00120000, 007C0000)	3968 MB
P47: cache            (008E0000, 00100000)	512 MB
P48: lafbak           (009E0000, 0000E000)	28 MB
P49: spare6           (009EE000, 00002000)	4 MB
P50: OP               (009F0000, 002A8000)	1360 MB
P51: userdata         (00C98000, 0107EC00)	8.248 GB
P52: flashinfo        (FFFF0084, FFFFFFFF00017F7D)	1.718e+10 GB
Backuping nvdata partition... 
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/QE63MB_nvdata_0xb8000_0x10000_24_02_2020_14_07_44.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:12 
SW: 2.0.3; FW: 1.24.
Repairing from file "C:/Program Files (x86)/Medusa Pro Software/SRF/LG_M320_EMMC.srf".
Write data verification is enabled.

Switched to boot area partition 1.
Writing BOOT1 partition...	Done.

Switched to boot area partition 2.
Writing BOOT2 partition...	Done.

Switched to user area.
Writing GPT partition...	Done.
Writing proinfo partition...	Done.
Writing spare1 partition...	Done.
Writing misc2 partition...	Done.
Writing ftm partition...	Done.
Writing nvram partition...	Done.
Writing spare2 partition...	Done.
Writing protect1 partition...	Done.
Writing protect2 partition...	Done.
Writing lk partition...	Done.
Writing lk2 partition...	Done.
Writing laf partition...	Done.
Writing para partition...	Done.
Writing boot partition...	Done.
Writing recovery partition...	Done.
Writing recoverybak partition...	Done.
Writing logo partition...	Done.
Writing lo_bak_go partition...	Done.
Writing expdb partition...	Done.
Writing seccfg partition...	Done.
Writing oemkeystore partition...	Done.
Writing secro partition...	Done.
Writing spare3 partition...	Done.
Writing keystore partition...	Done.
Writing tee1 partition...	Done.
Writing tee2 partition...	Done.
Writing eksst partition...	Done.
Writing encrypt partition...	Done.
Writing spare4 partition...	Done.
Writing persist_lg partition...	Done.
Writing mpt partition...	Done.
Writing lgfota partition...	Done.
Writing rct partition...	Done.
Writing factory partition...	Done.
Writing efuse partition...	Done.
Writing spare5 partition...	Done.
Writing persist partition...	Done.
Writing nvcfg partition...	Done.
Writing nvdata partition...	Done.
Writing metadata partition...	Done.
Writing md1img partition...	Done.
Writing md1dsp partition...	Done.
Writing md1arm7 partition...	Done.
Writing md3img partition...	Done.
Writing cust partition...	Done.
Writing frp partition...	Done.
Writing lafbak partition...	Done.
Writing spare6 partition...	Done.
Writing OP partition...	Done.

Smart Repair is successfully complete.
SW: 2.0.3; FW: 1.24.
Disconnected.[/LEFT]

تم تجريب عدد من الـ Firmware اصدار حديثة عن طريق Factory repair لاكن لا نتيجة اجابية


الغريب في الحل: انه عند تمرير Firmware M320N وبالتحديد اصدار: M320n20d_00_OPEN_EU_OP_1212.kdz
عن طريق Factory repair. اشتغل الهاتف والحمد لله. مع العلم انه هاتف LG_M320


كود:
[LEFT]Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Brand     : LG
Model     : M320
SRF       : C:/Program Files (x86)/Medusa Pro Software/SRF/LG_M320_EMMC.srf
Voltage   : 1.8V
Bus Mode  : 1 bit
Bus speed : Auto

Connecting...
Device       : Samsung eMMC QE63MB
Page size    : 512 B
Block size   : 512 B
Block count  : 30535680
Size         : 14.56 GB (14910.00 MB)
---------------------------------------------------------------
CID Info

CID                   : 150100514536334D42033C6C904825F7
Manufacturer ID       : 0X15
Device/BGA            : BGA (Discrete embedded)
OEM/Application ID    : 0X00
Product name          : QE63MB
Product revision      : 0.3
Product serial number : (hex) 3C6C9048
Manufacturing date    : 02/2018
---------------------------------------------------------------
CSD Info

CSD                   : D02701320F5903FFF6DBFFEF8E40400D
CSD structure         : CSD version No. 1.2
SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                        4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed            : 26 MHz
READ block length     : 512 Bytes
WP group enable       : YES
PERM_WRITE_PROTECT    : NO
TMP_WRITE_PROTECT     : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.8 (for MMC v5.1)
Erase block size      : 512 Kbytes
Boot1 size            : 4096 Kbytes
Boot2 size            : 4096 Kbytes
RPMB size             : 4096 Kbytes

Partition config      : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK              : Boot acknowledge sent during boot operation Bit

Boot bus conditions   : (0x00) 00000000
Boot bus width        : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode             : Use single data rate + backward compatible timings in boot operation (default)

RST_n function        : (0x01) RST_n signal is permanently enabled

Partitioning support  : Device supports partitioning features
Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7626752 Kbytes
Partitions attribute  : 0x0
Part setting completed: 0x0
GP partition 1 size   : 0 b
GP partition 2 size   : 0 b
GP partition 3 size   : 0 b
GP partition 4 size   : 0 b
Enhanced area size    : (0x0) 0 b
Enhanced area start   : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/QE63MB_24_02_2020_14_14_27.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.0.3; FW: 1.24.
P00: GPT              (00000000, 00000400)	512 KB
P01: proinfo          (00000400, 00001800)	3072 KB
P02: spare1           (00001C00, 00002400)	4.5 MB
P03: misc2            (00004000, 00004000)	8 MB
P04: ftm              (00008000, 00004000)	8 MB
P05: nvram            (0000C000, 00002800)	5 MB
P06: spare2           (0000E800, 00001800)	3072 KB
P07: protect1         (00010000, 00004000)	8 MB
P08: protect2         (00014000, 00004000)	8 MB
P09: lk               (00018000, 00000800)	1024 KB
P10: lk2              (00018800, 00000800)	1024 KB
P11: laf              (00019000, 0000E000)	28 MB
P12: para             (00027000, 00000400)	512 KB
P13: boot             (00027400, 00008C00)	17.5 MB
P14: recovery         (00030000, 00009800)	19 MB
P15: recoverybak      (00039800, 00009800)	19 MB
P16: logo             (00043000, 00004000)	8 MB
P17: lo_bak_go        (00047000, 00004000)	8 MB
P18: expdb            (0004B000, 00005000)	10 MB
P19: seccfg           (00050000, 00004000)	8 MB
P20: oemkeystore      (00054000, 00004000)	8 MB
P21: secro            (00058000, 00003000)	6 MB
P22: spare3           (0005B000, 00001000)	2048 KB
P23: keystore         (0005C000, 00004000)	8 MB
P24: tee1             (00060000, 00002800)	5 MB
P25: tee2             (00062800, 00002800)	5 MB
P26: eksst            (00065000, 00000400)	512 KB
P27: encrypt          (00065400, 00000400)	512 KB
P28: spare4           (00065800, 00002800)	5 MB
P29: persist_lg       (00068000, 00004000)	8 MB
P30: mpt              (0006C000, 0000B000)	22 MB
P31: lgfota           (00077000, 00005000)	10 MB
P32: rct              (0007C000, 00000800)	1024 KB
P33: factory          (0007C800, 0001C000)	56 MB
P34: efuse            (00098800, 00000400)	512 KB
P35: spare5           (00098C00, 00003400)	6.5 MB
P36: persist          (0009C000, 00018000)	48 MB
P37: nvcfg            (000B4000, 00004000)	8 MB
P38: nvdata           (000B8000, 00010000)	32 MB
P39: metadata         (000C8000, 00010000)	32 MB
P40: md1img           (000D8000, 0000C000)	24 MB
P41: md1dsp           (000E4000, 00002000)	4 MB
P42: md1arm7          (000E6000, 00001800)	3072 KB
P43: md3img           (000E7800, 00002800)	5 MB
P44: cust             (000EA000, 00032000)	100 MB
P45: frp              (0011C000, 00004000)	8 MB
P46: system           (00120000, 007C0000)	3968 MB
P47: cache            (008E0000, 00100000)	512 MB
P48: lafbak           (009E0000, 0000E000)	28 MB
P49: spare6           (009EE000, 00002000)	4 MB
P50: OP               (009F0000, 00019000)	50 MB
P51: userdata         (00A09000, 0130DC00)	9.527 GB
P52: flashinfo        (01D16C00, 00008000)	16 MB
Backuping nvdata partition... 
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/QE63MB_nvdata_0xb8000_0x10000_24_02_2020_14_14_27.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:12 
SW: 2.0.3; FW: 1.24.
Opening H:/LG/M320__xpower-2/M320n20d_00_OPEN_EU_OP_1212.kdz file...
Write data verification is enabled.
Writing. Please wait...

Switched to boot area partition 1.
Writing partition preloader...	Done.

Switched to user area.
Writing partition pgpt...	Done.
Writing partition lk...	Done.
Writing partition lk2...	Done.
Writing partition laf...	Done.
Writing partition boot...	Done.
Writing partition recovery...	Done.
Writing partition logo...	Done.
Writing partition lo_bak_go...	Done.
Writing partition secro...	Done.
Writing partition tee1...	Done.
Writing partition tee2...	Done.
Writing partition rct...	Done.
Writing partition factory...	Done.
Writing partition efuse...	Done.
Writing partition md1img...	Done.
Writing partition md1dsp...	Done.
Writing partition md1arm7...	Done.
Writing partition md3img...	Done.
Writing partition cust...	Done.
Writing partition sgpt...	Done.
Writing is finished.
SW: 2.0.3; FW: 1.24.
Disconnected.
[/LEFT]

انشاء ملف SRF
كود:
[LEFT][B][SIZE=2]Welcome to Medusa Pro Software version 2.0.3. 
Started.
Reader #0: Generic EMV Smartcard Reader 0

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Brand     : LG
Model     : M320
SRF       : C:/Program Files (x86)/Medusa Pro Software/SRF/LG_M320_EMMC.srf
Voltage   : 1.8V
Bus Mode  : 1 bit
Bus speed : Auto

Connecting...
Device       : Samsung eMMC QE63MB
Page size    : 512 B
Block size   : 512 B
Block count  : 30535680
Size         : 14.56 GB (14910.00 MB)
---------------------------------------------------------------
CID Info

CID                   : 150100514536334D42033C6C904825F7
Manufacturer ID       : 0X15
Device/BGA            : BGA (Discrete embedded)
OEM/Application ID    : 0X00
Product name          : QE63MB
Product revision      : 0.3
Product serial number : (hex) 3C6C9048
Manufacturing date    : 02/2018
---------------------------------------------------------------
CSD Info

CSD                   : D02701320F5903FFF6DBFFEF8E40400D
CSD structure         : CSD version No. 1.2
SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                        4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed            : 26 MHz
READ block length     : 512 Bytes
WP group enable       : YES
PERM_WRITE_PROTECT    : NO
TMP_WRITE_PROTECT     : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.8 (for MMC v5.1)
Erase block size      : 512 Kbytes
Boot1 size            : 4096 Kbytes
Boot2 size            : 4096 Kbytes
RPMB size             : 4096 Kbytes

Partition config      : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK              : Boot acknowledge sent during boot operation Bit

Boot bus conditions   : (0x00) 00000000
Boot bus width        : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode             : Use single data rate + backward compatible timings in boot operation (default)

RST_n function        : (0x01) RST_n signal is permanently enabled

Partitioning support  : Device supports partitioning features
Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7626752 Kbytes
Partitions attribute  : 0x0
Part setting completed: 0x0
GP partition 1 size   : 0 b
GP partition 2 size   : 0 b
GP partition 3 size   : 0 b
GP partition 4 size   : 0 b
Enhanced area size    : (0x0) 0 b
Enhanced area start   : (0x0) 0 b

---------------------------------------------------------------Searching Android build info...
Ok

Disk/Image size       : a3e00000 bytes
Device sector size    : 512 bytes
Partition offset      : 1179648
Number of sectors     : 8126464
Device Manufacturer   :[COLOR="#008000"] lge[/COLOR]
Device Platform       :[COLOR="#008000"] mt6750[/COLOR]
Build ID              : [COLOR="#008000"]O11019[/COLOR]
Display Build ID      : [COLOR="#008000"]O11019[/COLOR]
Release ID            : [COLOR="#008000"]8.1.0[/COLOR]
Device Model          : [COLOR="#008000"]LG-M320[/COLOR]
Device Name           : [COLOR="#008000"]mlv7_global_com[/COLOR]
Architecture ABI      : [COLOR="#008000"]armeabi-v7a[/COLOR]
Architecture ABI2     :[COLOR="#008000"] armeabi[/COLOR]
Architecture ABI List : [COLOR="#008000"]armeabi-v7a,armeabi[/COLOR]
Build Description     : [COLOR="#008000"]mlv7_global_com-user 8.1.0 O11019 1834621046f47 release-keys[/COLOR]

Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/QE63MB_24_02_2020_14_47_10.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.0.3; FW: 1.24.
P00: GPT              (00000000, 00000400)	512 KB
P01: proinfo          (00000400, 00001800)	3072 KB
P02: spare1           (00001C00, 00002400)	4.5 MB
P03: misc2            (00004000, 00004000)	8 MB
P04: ftm              (00008000, 00004000)	8 MB
P05: nvram            (0000C000, 00002800)	5 MB
P06: spare2           (0000E800, 00001800)	3072 KB
P07: protect1         (00010000, 00004000)	8 MB
P08: protect2         (00014000, 00004000)	8 MB
P09: lk               (00018000, 00000800)	1024 KB
P10: lk2              (00018800, 00000800)	1024 KB
P11: laf              (00019000, 0000E000)	28 MB
P12: para             (00027000, 00000400)	512 KB
P13: boot             (00027400, 00008C00)	17.5 MB
P14: recovery         (00030000, 00009800)	19 MB
P15: recoverybak      (00039800, 00009800)	19 MB
P16: logo             (00043000, 00004000)	8 MB
P17: lo_bak_go        (00047000, 00004000)	8 MB
P18: expdb            (0004B000, 00005000)	10 MB
P19: seccfg           (00050000, 00004000)	8 MB
P20: oemkeystore      (00054000, 00004000)	8 MB
P21: secro            (00058000, 00003000)	6 MB
P22: spare3           (0005B000, 00001000)	2048 KB
P23: keystore         (0005C000, 00004000)	8 MB
P24: tee1             (00060000, 00002800)	5 MB
P25: tee2             (00062800, 00002800)	5 MB
P26: eksst            (00065000, 00000400)	512 KB
P27: encrypt          (00065400, 00000400)	512 KB
P28: spare4           (00065800, 00002800)	5 MB
P29: persist_lg       (00068000, 00004000)	8 MB
P30: mpt              (0006C000, 0000B000)	22 MB
P31: lgfota           (00077000, 00005000)	10 MB
P32: rct              (0007C000, 00000800)	1024 KB
P33: factory          (0007C800, 0001C000)	56 MB
P34: efuse            (00098800, 00000400)	512 KB
P35: spare5           (00098C00, 00003400)	6.5 MB
P36: persist          (0009C000, 00018000)	48 MB
P37: nvcfg            (000B4000, 00004000)	8 MB
P38: nvdata           (000B8000, 00010000)	32 MB
P39: metadata         (000C8000, 00010000)	32 MB
P40: md1img           (000D8000, 0000C000)	24 MB
P41: md1dsp           (000E4000, 00002000)	4 MB
P42: md1arm7          (000E6000, 00001800)	3072 KB
P43: md3img           (000E7800, 00002800)	5 MB
P44: cust             (000EA000, 00032000)	100 MB
P45: frp              (0011C000, 00004000)	8 MB
P46: system           (00120000, 007C0000)	3968 MB
P47: cache            (008E0000, 00100000)	512 MB
P48: lafbak           (009E0000, 0000E000)	28 MB
P49: spare6           (009EE000, 00002000)	4 MB
P50: OP               (009F0000, 00019000)	50 MB
P51: userdata         (00A09000, 0130DC00)	9.527 GB
P52: flashinfo        (01D16C00, 00008000)	16 MB
Backuping nvdata partition... 
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/QE63MB_nvdata_0xb8000_0x10000_24_02_2020_14_47_10.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:12 
SW: 2.0.3; FW: 1.24.
Partition table has been found on device.

Switched to boot area partition 1.
Added partition BOOT1 to constructor file.

Switched to boot area partition 2.
Added partition BOOT2 to constructor file.

Switched to user area.
Added partition GPT to constructor file.
Added partition proinfo to constructor file.
Added partition spare1 to constructor file.
Added partition misc2 to constructor file.
Added partition ftm to constructor file.
Added partition nvram to constructor file.
Added partition spare2 to constructor file.
Added partition protect1 to constructor file.
Added partition protect2 to constructor file.
Added partition lk to constructor file.
Added partition lk2 to constructor file.
Added partition laf to constructor file.
Added partition para to constructor file.
Added partition boot to constructor file.
Added partition recovery to constructor file.
Added partition recoverybak to constructor file.
Added partition logo to constructor file.
Added partition lo_bak_go to constructor file.
Added partition expdb to constructor file.
Added partition seccfg to constructor file.
Added partition oemkeystore to constructor file.
Added partition secro to constructor file.
Added partition spare3 to constructor file.
Added partition keystore to constructor file.
Added partition tee1 to constructor file.
Added partition tee2 to constructor file.
Added partition eksst to constructor file.
Added partition encrypt to constructor file.
Added partition spare4 to constructor file.
Added partition persist_lg to constructor file.
Added partition mpt to constructor file.
Added partition lgfota to constructor file.
Added partition rct to constructor file.
Added partition factory to constructor file.
Added partition efuse to constructor file.
Added partition spare5 to constructor file.
Added partition persist to constructor file.
Added partition nvcfg to constructor file.
Added partition nvdata to constructor file.
Added partition metadata to constructor file.
Added partition md1img to constructor file.
Added partition md1dsp to constructor file.
Added partition md1arm7 to constructor file.
Added partition md3img to constructor file.
Added partition cust to constructor file.
Added partition frp to constructor file.
Added partition cache to constructor file.
Added partition lafbak to constructor file.
Added partition spare6 to constructor file.
Added partition OP to constructor file.
Added partition flashinfo to constructor file.
SRF "C:/Program Files (x86)/Medusa Pro Software/SRF/LG_M320N.srf" has been installed successfully.
[COLOR="#FF0000"]Disconnected[/COLOR][/SIZE][/B].[/LEFT]

تحمل ملف SRF من هنـــــــــــــــا

بعد تصليح البوت تم التفليش باستعمال نفس الـ M320n20d_00_OPEN_EU_OP_1212.kdz Firmware على Octoplus LG



تم بعون الله
 

.:: Sebti _ Gsm ::.

:: مراقب قسم بوكسات الجيتاق JTAG ::
إنضم
30 ديسمبر 2015
المشاركات
1,669
مستوى التفاعل
2,934
النقاط
113
الإقامة
Ghardaïa
رد: تصليح بوت Repair boot Xpower-2__M320

معلومات عن الجهاز بعد نجاح التفليش على Read info Octoplus LG

كود:
[LEFT][B][SIZE=2]Welcome to Octoplus/Octopus Box LG Software version 2.9.9
--------------------------------------------------------------------------------
Platform: LG MTK
Selected port: COM4
Selected baudrate: 115200
Selected model: M320N
Selected USB connection type
Power phone OFF, press and hold "Vol+" button and connect the 
cable
Phone found at port COM154
Mode: Emergency
Initializing flash...OK
Model ID: LG-M320
Platform: mt6750
Android version: 8.1.0
[COLOR="#0000FF"]SW version:[/COLOR] [COLOR="#006400"]LGM320AT-00-V20e-GLOBAL-COM-DEC-12-2018+0[/COLOR]
LAF Version: 1.1
Product ID: CT64S170529003844
IMEI: 357569-08-XXXXXX-X
Target operator: GLOBAL
Hardware: rev_10
Battery level: 87%
Reading partitions...OK
Checking security...
Checking security passed!
--------------------------------------------------------------------------------
IMEI A: 357569-08-XXXXXX-X
IMEI B: 357569-08-XXXXXX-X
Bluetooth address: 04:1B:6D:79:XX:XX
Wi-Fi MAC address: 04:1B:6D:CD:7XX:XX
SPC: 000000
--------------------------------------------------------------------------------
Performed by 2.9.9 Software version.
[/SIZE][/B][/LEFT]
 
التعديل الأخير:

DZ-Djamel-GSM

:: مراقب عام ::
إنضم
9 يوليو 2018
المشاركات
5,452
مستوى التفاعل
4,334
النقاط
113
الإقامة
DzGsm
رد: تصليح بوت Repair boot Xpower-2__M320

السلام عليكم

بارك الله فيك أخي سبتي عمل شاق وتجربة ممتازة موفق إن شاء الله شكراً لك
 

ALICHAIMA

:: عضو محترف ::
إنضم
6 يناير 2016
المشاركات
970
مستوى التفاعل
635
النقاط
93
الإقامة
DZGSM
رد: تصليح بوت Repair boot Xpower-2__M320

بارك الله فيك اخي سبتي شكرا لك
 

pera

:: عضو محترف ::, ,
إنضم
19 مايو 2016
المشاركات
1,825
مستوى التفاعل
1,584
النقاط
113
رد: تصليح بوت Repair boot Xpower-2__M320

السلام عليكم
بارك الله فيك اخي
 

dahmani med

:: مراقب قسم العام + قسم الهاردوير والصيانة ::
إنضم
19 أغسطس 2012
المشاركات
3,397
مستوى التفاعل
7,523
النقاط
113
الإقامة
EL ASSAFIA **LAGHOUAT
رد: تصليح بوت Repair boot Xpower-2__M320

بارك الله فيك على التجربة معلومات الجهاز ممكن تجدها بالكارت مير
 

.:: Sebti _ Gsm ::.

:: مراقب قسم بوكسات الجيتاق JTAG ::
إنضم
30 ديسمبر 2015
المشاركات
1,669
مستوى التفاعل
2,934
النقاط
113
الإقامة
Ghardaïa
رد: تصليح بوت Repair boot Xpower-2__M320

بارك الله فيك على التجربة معلومات الجهاز ممكن تجدها بالكارت مير

وفيك البركة اخي الدحماني المعلومات الموجودة في البطاقة الام هي lgm320tv_main (2)
 

dahmani med

:: مراقب قسم العام + قسم الهاردوير والصيانة ::
إنضم
19 أغسطس 2012
المشاركات
3,397
مستوى التفاعل
7,523
النقاط
113
الإقامة
EL ASSAFIA **LAGHOUAT
رد: تصليح بوت Repair boot Xpower-2__M320

موضوع يستاهل التثبيت اخي سبتي
 

15ziko

عضو أساسي
إنضم
2 يونيو 2013
المشاركات
980
مستوى التفاعل
650
النقاط
0
الإقامة
souk ahras
رد: تصليح بوت Repair boot Xpower-2__M320

بارك الله فيك أخي
:nosweat:
 

dawmi

عضو أساسي
إنضم
6 أغسطس 2018
المشاركات
825
مستوى التفاعل
105
النقاط
43
رد: تصليح بوت Repair boot Xpower-2__M320

جزاك الله كل خير اخي سبتي مشاركة الاخوة ملف الإصلاح والطريقة دليل على كرمك ونبل أخلاقك نتمنى لك السداد والتوفيق
 

Dr-GsM

عضو أساسي
إنضم
5 مارس 2015
المشاركات
1,284
مستوى التفاعل
627
النقاط
0
رد: تصليح بوت Repair boot Xpower-2__M320

شكر لك اخ شبتي عمل قيم وجهد رائع ربي يبارك فيك و يحفظك من العين
 

دراجي سوفت

:: مراقب قسم السوفت ويير والبرمجة ::
إنضم
28 فبراير 2016
المشاركات
1,452
مستوى التفاعل
4,108
النقاط
113
الإقامة
تيارت
رد: تصليح بوت Repair boot Xpower-2__M320

بارك الله فيك
 

خـليل

:: عضو مميز ::
إنضم
8 فبراير 2018
المشاركات
1,425
مستوى التفاعل
758
النقاط
113
رد: تصليح بوت Repair boot Xpower-2__M320

جزاك الله خيرًا على مشاركة التجربة، عمل موفق.
 

zakaria7O

:: عضو مميز ::
إنضم
29 أبريل 2016
المشاركات
1,661
مستوى التفاعل
714
النقاط
113
رد: تصليح بوت Repair boot Xpower-2__M320

بارك الله فيك أخي سبتي
 

yassinecrb

عضو
إنضم
5 مارس 2016
المشاركات
23
مستوى التفاعل
10
النقاط
3
رد: تصليح بوت Repair boot Xpower-2__M320

salam
سلام عندي مشكل lg x power 2 dead boot
عند ربطه بالحاسوب يعطيني mtk preloader
 

.:: Sebti _ Gsm ::.

:: مراقب قسم بوكسات الجيتاق JTAG ::
إنضم
30 ديسمبر 2015
المشاركات
1,669
مستوى التفاعل
2,934
النقاط
113
الإقامة
Ghardaïa
رد: تصليح بوت Repair boot Xpower-2__M320

salam
سلام عندي مشكل lg x power 2 dead boot
عند ربطه بالحاسوب يعطيني mtk preloader

وعليك السلام
لم تذكر السبب الذي اوصل الهاتف الى هذا الوضع

*فلاشة خاطئة == عمل jtag.........
*سقوط على الارض او الماء == مشكل هاردوير........
*لوحده == 90% مشكل هاردوير..........


معرفة الاسباب تحضر لك الحلول. بإذن الله
بالتوفيق
 

imad_gsm

عضو أساسي
إنضم
14 يوليو 2014
المشاركات
1,031
مستوى التفاعل
144
النقاط
63
الإقامة
الجزائر
رد: تصليح بوت Repair boot Xpower-2__M320

عند تمرير ملف srf الخاص ب ميدوسا
الجهاز باقي ميت
كذلك بتمرير ملف الاخ سبتي
ربما هذه االاجهزة لها العديد من ملفات التصليح
 
أعلى