اخواني اعضاء المنتدى الجزائري للمحمول اقدم لكم
فلاشة الهاي الكوبي Samsung SM-J9[7] prime مسحوبة عن طريق NCK BOX
من هاتف سليم و جديد
info
كود:
Action : Boot Info.
Selected 0-By CPU:ELBRU
Exe version: NCKBox AndroidMTK 2.4
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM25)
Boot mode: Brom
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
[emmi]EMMC CID: 5300017030303031df
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : FE
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (28Gb+4096Mb) KSI 0x533130303034
EMMC FW VERSION: 08:00:00:00:00:00:00:00
EMMC CID: 700100533130303034 : 00000000000000
EMMC UA SIZE: 0xe4000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe4c00000 [3.574 GB]
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM24)
Build ID: LMY47I
Display ID: l19_lyx_a400_welcome_en_hd_v08
Version: 6.0
Model: SM-J9[7] prime
Brand: Samsung
Device: SM-J9[7] prime
Manufacturer: Android
Region: US
Mediatek Version Release: ALPS.L1.MP6.V2_AEON6580.WEG.L_P73
FRP partition: /dev/block/platform/mtk-msdc.0/by-name/frp
This phone have FRP partition.
IMEI[1]: 35xxxxxxxxxxx
IMEI[2]: 35xxxxxxxxxxx
Wait untill phone will start charging.
[0]All done.
كود
كود:
Action : Read Firmware.
Selected 0-By CPU:MT6580
Exe version: NCKBox AndroidMTK 2.4
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM25)
Boot mode: Brom
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
[emmi]EMMC CID: 5300017030303031df
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : FE
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (28Gb+4096Mb) KSI 0x533130303034
EMMC FW VERSION: 08:00:00:00:00:00:00:00
EMMC CID: 700100533130303034 : 00000000000000
EMMC UA SIZE: 0xe4000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe4c00000 [3.574 GB]
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM24)
Build ID: LMY47I
Display ID: l19_lyx_a400_welcome_en_hd_v08
Version: 6.0
Model: SM-J9[7] prime
Brand: Samsung
Device: SM-J9[7] prime
Manufacturer: Android
Region: US
Mediatek Version Release: ALPS.L1.MP6.V2_AEON6580.WEG.L_P73
FRP partition: /dev/block/platform/mtk-msdc.0/by-name/frp
IMEI[1]: 358624528040590
IMEI[2]: 358624528040608
Dumping Preloader.
Partition: proinfo
Partition: nvram
Partition: protect1
Partition: protect2
Partition: seccfg
Partition: lk
Partition: boot
Partition: recovery
Partition: para
Partition: logo
Partition: expdb
Partition: frp
Partition: nvdata
Partition: metadata
Partition: oemkeystore
Partition: secro
Partition: keystore
Partition: system
Partition: cache
Partition: userdata
Partition: flashinfo
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo ......
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram ......
Reading: BEGIN: 0x380000 - LEN: 0x500000
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk
Start processing boot
Start processing recovery
Start processing logo ......
Start processing nvdata ......
Reading: BEGIN: 0x50a0000 - LEN: 0x2000000
Start processing secro secro.img
Reading: BEGIN: 0x9a00000 - LEN: 0x600000
Start processing system
Reading: BEGIN: 0xa800000 - LEN: 0x60000000
Saved to : C:\Users\Ahmed GSM\Documents\Android_MTK\firmware_backup\MT6580_EMMC_LMY47I__6_0_SM-J9[7] prime_Samsung_2020_02_03_10_43)
Wait untill phone will start charging.
[0]All done.
رابط الفلاشة
http://www.mediafire.com/file/qtx05rmzduxzx4a/SM-J9%5B7%5D_prime_MT6580_DZGSM.rar/file
لا توجد كلمة المرور ... حقوق المنتدى محفوظة داخل ملف الفلاشة
]لا تنسونا من دعائكم