السلام عليكم ورحمة الله وبركاته
حصريا تم اصلاح بوت الهاتف SONY XPERIA L1 G3312
وعمل ملف الاصلاح SRF REPAIRE من على واجهة SMART REPARE
كما انه يمكن عمل ملف الفلاشة من واجهة FACTORY REPAIRE SONY ( لكن لضيق الوقت لم اتطرق لذلك )
لوغ العملية
لوغ الاصلاح SRF
لوغ العملية بعد اصلاح الهاتف
دمتم في رعاية الله وحفظه سلام .............
للمزيد من المتابعة : http://forum.gsmhosting.com/vbb/f664/repare-boot-sony-l1-g3312-2778558/
حصريا تم اصلاح بوت الهاتف SONY XPERIA L1 G3312
وعمل ملف الاصلاح SRF REPAIRE من على واجهة SMART REPARE
كما انه يمكن عمل ملف الفلاشة من واجهة FACTORY REPAIRE SONY ( لكن لضيق الوقت لم اتطرق لذلك )
لوغ العملية
كود:
Welcome to Medusa Pro Software version 2.0.4.
Started.
Reader #0: Generic EMV Smartcard Reader 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC QE13MB
Page size : 512 B
Block size : 512 B
Block count : 30535680
Size : 14.56 GB (14910.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100514531334D420DEEFDE4EE44E5
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QE13MB
Product revision : 0.13
Product serial number : (hex) EEFDE4EE
Manufacturing date : 04/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7626752 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : a3e00000 bytes
Device sector size : 512 bytes
Partition offset : 23724032
Number of sectors : 6766592
Device Manufacturer : alps
Device Platform : mt6737t
Build ID : 43.0.A.7.70
Display Build ID : 43.0.A.7.70
Release ID : 7.0
Device Model : G3312
Device Name : Xperia L1
Architecture ABI : arm64-v8a
Architecture ABI List : arm64-v8a,armeabi-v7a,armeabi
Build Description : pine-user 7.0 2.92.J.7.66_201807262202 1532623597 test-keys
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/QE13MB_25_01_2020_09_41_11.bin.
Connect successful.لوغ الاصلاح SRF
كود:
Analyzing Trim Area (TA)... Ok
Lock status: unlocked
Backuping nvdata partition...
Opening C:/Program Files/Medusa Pro Software/Backups/QE13MB_nvdata_0x2de00_0x10000_25_01_2020_09_41_11.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:13
SW: 2.0.4; FW: 1.24.
Partition table has been found on device.
Save to C:/Users/PC/Desktop/sonyl1 folder...
Reading partition GPT... Done.
Reading partition ta... Done.
Reading partition protect1... Done.
Reading partition protect2... Done.
Reading partition ltalabel... Done.
Reading partition fotakernel... Done.
Reading partition para... Done.
Reading partition expdb... Done.
Reading partition frp... Done.
Reading partition ppl... Done.
Reading partition nvdata... Done.
Reading partition metadata... Done.
Reading partition persist... Done.
Reading partition seccfg... Done.
Reading partition oemkeystore... Done.
Reading partition proinfo... Done.
Reading partition nvram... Done.
Reading partition lk... Done.
Reading partition lk2... Done.
Reading partition boot... Done.
Reading partition logo... Done.
Reading partition tee1... Done.
Reading partition tee2... Done.
Reading partition secro... Done.
Reading partition sec1... Done.
Reading partition scp1... Done.
Reading partition scp2... Done.
Reading partition rdimage... Done.
Reading partition nvcfg... Done.
Reading partition keystore... Done.
Reading partition apps_log... Done.
Reading partition diag... Done.
Reading partition oem... Done.
Reading partition cache... Done.
Reading partition Qnovo... Done.
Reading is finished.
SW: 2.0.4; FW: 1.24.
Switched to boot area partition 1.
Opening C:/Users/PC/Desktop/Nouveau dossier/Samsung eMMC QE13MB_25_01_2020_09_57_09.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 2.0.4; FW: 1.24.
Switched to boot area partition 2.
Opening C:/Users/PC/Desktop/Nouveau dossier/Samsung eMMC QE13MB_25_01_2020_09_57_25.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 2.0.4; FW: 1.24.
EXT_CSD saved to file C:/Users/PC/Desktop/Nouveau dossier/EXT_CSD_25_01_2020_09_57_35.bin.
Please select file.
Please select file.
Please select file.
Partition table has been found on device.
Please select file.
Partition table has been found on device.
Partition table has been found on device.
Repairing from file "C:/Users/PC/Desktop/sonyl1/Sony_L1-G3312.srf".
Write data verification is enabled.
Switched to boot area partition 1.
Writing BOOT1 partition... Done.
Switched to boot area partition 2.
Writing BOOT2 partition... Done.
Switched to user area.
Writing GPT partition... Done.
Writing ta partition... Done.
Writing protect1 partition... Done.
Writing protect2 partition... Done.
Writing ltalabel partition... Done.
Writing fotakernel partition... Done.
Writing para partition... Done.
Writing expdb partition... Done.
Writing frp partition... Done.
Writing ppl partition... Done.
Writing nvdata partition... Done.
Writing metadata partition... Done.
Writing persist partition... Done.
Writing seccfg partition... Done.
Writing oemkeystore partition... Done.
Writing proinfo partition... Done.
Writing nvram partition... Done.
Writing lk partition... Done.
Writing lk2 partition... Done.
Writing boot partition... Done.
Writing logo partition... Done.
Writing tee1 partition... Done.
Writing tee2 partition... Done.
Writing secro partition... Done.
Writing sec1 partition... Done.
Writing scp1 partition... Done.
Writing scp2 partition... Done.
Writing rdimage partition... Done.
Writing nvcfg partition... Done.
Writing keystore partition... Done.
Writing apps_log partition... Done.
Writing diag partition... Done.
Writing oem partition... Done.
Writing cache partition... Done.
Writing Qnovo partition... Done.
Smart Repair is successfully complete.
SW: 2.0.4; FW: 1.24.
Disconnected.لوغ العملية بعد اصلاح الهاتف
كود:
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC QE13MB
Page size : 512 B
Block size : 512 B
Block count : 30535680
Size : 14.56 GB (14910.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100514531334D420DEEFDE4EE44E5
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QE13MB
Product revision : 0.13
Product serial number : (hex) EEFDE4EE
Manufacturing date : 04/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7626752 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : a3e00000 bytes
Device sector size : 512 bytes
Partition offset : 23724032
Number of sectors : 6766592
Device Manufacturer : alps
Device Platform : mt6737t
Build ID : 43.0.A.7.70
Display Build ID : 43.0.A.7.70
Release ID : 7.0
Device Model : G3312
Device Name : Xperia L1
Architecture ABI : arm64-v8a
Architecture ABI List : arm64-v8a,armeabi-v7a,armeabi
Build Description : pine-user 7.0 2.92.J.7.66_201807262202 1532623597 test-keys
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/QE13MB_25_01_2020_10_19_47.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.0.4; FW: 1.24.
P00: GPT (00000000, 00000400) 512 KB
P01: ta (00000400, 00001000) 2048 KB
P02: protect1 (00001400, 00005000) 10 MB
P03: protect2 (00006400, 00005C00) 11.5 MB
P04: ltalabel (0000C000, 00008000) 16 MB
P05: fotakernel (00014000, 00014000) 40 MB
P06: para (00028000, 00000400) 512 KB
P07: expdb (00028400, 00005000) 10 MB
P08: frp (0002D400, 00000800) 1024 KB
P09: ppl (0002DC00, 00000200) 256 KB
P10: nvdata (0002DE00, 00010000) 32 MB
P11: metadata (0003DE00, 00010000) 32 MB
P12: persist (0004DE00, 0001A200) 52.25 MB
P13: seccfg (00068000, 00000200) 256 KB
P14: oemkeystore (00068200, 00004000) 8 MB
P15: proinfo (0006C200, 00001800) 3072 KB
P16: nvram (0006DA00, 00002800) 5 MB
P17: lk (00070200, 00000800) 1024 KB
P18: lk2 (00070A00, 00000800) 1024 KB
P19: boot (00071200, 00014000) 40 MB
P20: logo (00085200, 00004000) 8 MB
P21: tee1 (00089200, 00002800) 5 MB
P22: tee2 (0008BA00, 00002800) 5 MB
P23: secro (0008E200, 00003000) 6 MB
P24: sec1 (00091200, 00001000) 2048 KB
P25: scp1 (00092200, 00000800) 1024 KB
P26: scp2 (00092A00, 00000800) 1024 KB
P27: rdimage (00093200, 00014E00) 41.75 MB
P28: nvcfg (000A8000, 00004000) 8 MB
P29: keystore (000AC000, 00004000) 8 MB
P30: apps_log (000B0000, 00008000) 16 MB
P31: diag (000B8000, 00008000) 16 MB
P32: oem (000C0000, 00094000) 296 MB
P33: cache (00154000, 00064000) 200 MB
P34: Qnovo (001B8000, 0000C000) 24 MB
P35: userdata (001C4000, 014DC000) 10.43 GB
P36: system (016A0000, 00674000) 3304 MB
P37: flashinfo (01D16C00, 00008000) 16 MB
Backuping ta partition...
Opening C:/Program Files/Medusa Pro Software/Backups/QE13MB_ta_0x400_0x1000_25_01_2020_10_19_47.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.0.4; FW: 1.24.
Analyzing Trim Area (TA)... Ok
Lock status: unlocked
Backuping nvdata partition...
Opening C:/Program Files/Medusa Pro Software/Backups/QE13MB_nvdata_0x2de00_0x10000_25_01_2020_10_19_47.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:13
SW: 2.0.4; FW: 1.24.دمتم في رعاية الله وحفظه سلام .............
للمزيد من المتابعة : http://forum.gsmhosting.com/vbb/f664/repare-boot-sony-l1-g3312-2778558/
