سوف نتطرق في هذا الشرح لعملية حدف حساب غوغل مع سحب الفلاشة لهاتف ACCENT PEARL A6 على NCK
الهاتف
حدفـــFRP
كود:
Exe version: NCKDongle AndroidMTK 2.6.3 Selected model: Tecno LA7
[auto]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM16)
Boot mode: Preloader
Phone detected...Please wait
BBCHIP: 6739 0 ca00
Using Algo 5.
Helio MT6739 phone detected, swithing to helio api
Preloader: C:\Users\Mus\AppData\Local\Temp\android_mtk\preloader\preloader_ra6_h394.bin
Helio enabled DRAM in First Da: TRUE
BBCHIP MT6739
[1]Storage EMMC
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 15010052583142 : 000000000000000000
EMMC UA SIZE: 0x747c00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x748800000 [29.133 GB]
Modem version: MOLY.LR12A.R2.MP.V56.1.P1
Starting helio frp, not disconnect phone untill done
[HELIO]Format partition, please wait...
[0]FRP Reset Done.
[HELIO]Format partition, please wait...
[1]FRP Reset Done.
[helio]Wait untill phone will start charging.
[0]All done.انفو الهاتف
كود:
Action : Boot Info. Selected Tecno:LA7
Exe version: NCKDongle AndroidMTK 2.6.3
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM16)
Boot mode: Preloader
Phone detected...Please wait
BBCHIP: 6739 0 ca00
Using Algo 5.
Helio MT6739 phone detected, swithing to helio api
Preloader: C:\Users\Mus\AppData\Local\Temp\android_mtk\preloader\preloader_ra6_h394.bin
Helio enabled DRAM in First Da: TRUE
BBCHIP MT6739
[1]Storage EMMC
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 15010052583142 : 000000000000000000
EMMC UA SIZE: 0x747c00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x748800000 [29.133 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM3)
Build ID: O11019
Display ID: PEARL_A6_8053AC_V07_16012019
Version: 8.1.0
Build Date: Wed Jan 16 21:12:57 CST 2019
Model: PEARL A6
Brand: ACCENT
Device: PEARL_A6
Manufacturer: Vanzo
This phone have FRP partition.
Modem version: MOLY.LR12A.R2.MP.V56.1.P1
[3][Missing imei entry]Warning, nvram posible damaged!!.
[helio]Wait untill phone will start charging.
[0]All done.انفو السحب
كود:
Action : Read Firmware. Selected Tecno:LA7
Exe version: NCKDongle AndroidMTK 2.6.3
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM16)
Boot mode: Preloader
Phone detected...Please wait
BBCHIP: 6739 0 ca00
Using Algo 5.
Helio MT6739 phone detected, swithing to helio api
Preloader: C:\Users\Mus\AppData\Local\Temp\android_mtk\preloader\preloader_ra6_h394.bin
Helio enabled DRAM in First Da: TRUE
BBCHIP MT6739
[1]Storage EMMC
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 15010052583142 : 000000000000000000
EMMC UA SIZE: 0x747c00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x748800000 [29.133 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM3)
Build ID: O11019
Display ID: PEARL_A6_8053AC_V07_16012019
Version: 8.1.0
Build Date: Wed Jan 16 21:12:57 CST 2019
Model: PEARL A6
Brand: ACCENT
Device: PEARL_A6
Manufacturer: Vanzo
Modem version: MOLY.LR12A.R2.MP.V56.1.P1
[3][Missing imei entry]Warning, nvram posible damaged!!.
Dumping Preloader.
Partition: boot_para
Partition: recovery
Partition: para
Partition: expdb
Partition: frp
Partition: nvcfg
Partition: nvdata
Partition: metadata
Partition: protect1
Partition: protect2
Partition: seccfg
Partition: sec1
Partition: proinfo
Partition: md1img
Partition: md1dsp
Partition: spmfw
Partition: mcupmfw
Partition: gz1
Partition: gz2
Partition: nvram
Partition: lk
Partition: lk2
Partition: loader_ext1
Partition: loader_ext2
Partition: boot
Partition: logo
Partition: odmdtbo
Partition: tee1
Partition: tee2
Partition: vendor
Partition: system
Partition: cache
Partition: userdata
Partition: flashinfo
Start dumping flash, this can take up to 1 hour.......
Start processing recovery
Start processing frp ......
Reading: BEGIN: 0x2d88000 - LEN: 0x100000
Start processing nvcfg ......
Reading: BEGIN: 0x2e88000 - LEN: 0x800000
Start processing nvdata ......
Reading: BEGIN: 0x3688000 - LEN: 0x2000000
Start processing protect1 ......
Reading: BEGIN: 0x7688000 - LEN: 0x800000
Start processing protect2 ......
Reading: BEGIN: 0x7e88000 - LEN: 0x978000
Start processing proinfo
Reading: BEGIN: 0x9200000 - LEN: 0x300000
Start processing md1img md1img.img
Reading: BEGIN: 0x9500000 - LEN: 0x4000000
Start processing md1dsp md1dsp.img
Reading: BEGIN: 0xd500000 - LEN: 0x1000000
Start processing spmfw spmfw.img
Reading: BEGIN: 0xe500000 - LEN: 0x100000
Start processing mcupmfw mcupmfw.img
Reading: BEGIN: 0xe600000 - LEN: 0x100000
Start processing nvram
Start processing lk
Start processing loader_ext1 loader_ext.img
Reading: BEGIN: 0x10e00000 - LEN: 0x10000
Start processing boot
Start processing logo ......
Start processing odmdtbo odmdtbo.img
Reading: BEGIN: 0x12e20000 - LEN: 0x1000000
Start processing trustzone
Start processing vendor vendor.img
Reading: BEGIN: 0x15000000 - LEN: 0x22800000
Start processing system
Reading: BEGIN: 0x37800000 - LEN: 0xa0000000
Saved to : C:\Users\Mus\Documents\Android_MTK\firmware_backup\MT6739_EMMC_O11019__8_1_0_PEARL A6_ACCENT_2020_01_18_00_51)
[helio]Wait untill phone will start charging.
[0]All done.
الفلاشة
https://mega.nz/#!SP5G1aDS!-gDCzmT0lOXWv1POFD793R8tVMMnHrXGKsuTN1rOCQc
NVRAM
https://mega.nz/#!6CwWSQQL!wVVJgqzUCsmzwrfVL5KqLIwy4NInRTSb0VdP1qgJdUU
>>>ملاحضة: يجب اختيار موديل TECNO LA7 لتبوبيت دون الحاجة لملف DA
