تحية طيبة لكل مشرفي و اعضاء و زوار المنتدى
اقدم لكم فلاشة DOOGEE X5 PRO اصدار 5.1 مسحوبة بــNCK DONGLE
Brand: DOOGEE
Model: X5pro
Version: 5.1
Device: hct6735m_35gu_l
Manufacturer: DOOGEE
الهاتف
انفو الهاتف
كود:
Action : Boot Info.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.6.3
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM29)
Boot mode: Preloader
BBCHIP: 335 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6735M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (117Gb+16384Mb) HYNIX 0x484147326505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A484147326505 : 00000000000000
EMMC UA SIZE: 0x3ab800000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac400000 [14.691 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM30)
Build ID: LMY47D
Display ID: DOOGEE-X5pro-Android5.1-R17-2016.07.01
Version: 5.1
Model: X5pro
Brand: DOOGEE
Device: hct6735m_35gu_l
Manufacturer: DOOGEE
Region: US
Mediatek Version Release: DOOGEE-X5pro-Android5.1-R17-2016.07.01
FRP partition: /dev/block/platform/mtk-msdc.0/by-name/frp
This phone have FRP partition.
IMEI[1]: 350000000000000
IMEI[2]: 350000000000000
Wait untill phone will start charging.
[0]All done.
انفو السحب
كود:
Action : Read Firmware.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.6.3
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM29)
Boot mode: Preloader
BBCHIP: 335 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6735M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (117Gb+16384Mb) HYNIX 0x484147326505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A484147326505 : 00000000000000
EMMC UA SIZE: 0x3ab800000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac400000 [14.691 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM30)
Build ID: LMY47D
Display ID: DOOGEE-X5pro-Android5.1-R17-2016.07.01
Version: 5.1
Model: X5pro
Brand: DOOGEE
Device: hct6735m_35gu_l
Manufacturer: DOOGEE
Region: US
Mediatek Version Release: DOOGEE-X5pro-Android5.1-R17-2016.07.01
FRP partition: /dev/block/platform/mtk-msdc.0/by-name/frp
IMEI[1]: 356446073464138
IMEI[2]: 356446073464146
Dumping Preloader.
Partition: proinfo
Partition: nvram
Partition: protect1
Partition: protect2
Partition: lk
Partition: para
Partition: boot
Partition: recovery
Partition: logo
Partition: expdb
Partition: seccfg
Partition: oemkeystore
Partition: secro
Partition: keystore
Partition: tee1
Partition: tee2
Partition: frp
Partition: nvdata
Partition: metadata
Partition: system
Partition: cache
Partition: userdata
Partition: flashinfo
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: 356000000000000
IMEI[2] from NVRAM: 356000000000000
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk
Start processing boot
Start processing recovery
Start processing logo ......
Start processing secro secro.img
Reading: BEGIN: 0x5200000 - LEN: 0x600000
Start processing trustzone
Start processing frp ......
Reading: BEGIN: 0x6a00000 - LEN: 0x100000
Start processing nvdata ......
Reading: BEGIN: 0x6b00000 - LEN: 0x2000000
Start processing system
Reading: BEGIN: 0xb000000 - LEN: 0x60000000
Saved to : C:\Users\Mus\Documents\Android_MTK\firmware_backup\MT6735M_EMMC_LMY47D__5_1_X5pro_DOOGEE_2020_01_12_23_27)
Wait untill phone will start charging.
[0]All done.
الفلاشة
https://mega.nz/#!rfwCmK4D!rs5jkN6KipTpKppU0WG93JeUzMYWu-3tSAgutdlOCs8
NVRAM
https://mega.nz/#!6f5QFYrI!3sN8MA8jhKhS3RNYGk_LuH6LAPmwRaDaKFNC2jbJ4XE
ملاحظة: التبويت بضغط على زر - و وصل الكابل و ادراج البطارية