حصريا ربير huawei cun-u29

dahmani med

:: مراقب قسم العام + قسم الهاردوير والصيانة ::
إنضم
19 أغسطس 2012
المشاركات
3,397
مستوى التفاعل
7,523
النقاط
113
الإقامة
EL ASSAFIA **LAGHOUAT
981506075.png


السلام عليكم ورحمة الله وبركاته
اقدم لكم طريقة حل مشكل في الذاكرة EMMC
هدية لاخي Simo Mohamed Gsm عن موضوعه[
/SIZE]
[/B][/COLOR] https://www.dzgsm.com/vb/threads/74801-pin-out-emmc-emmc-huawei-cun-u29/

CONECT EMMC AND LOGO

كود:
Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Voltage   : 1.8V
Bus Mode  : 1 bit
Bus speed : Auto

Connecting...
Device       : Samsung eMMC FN12MB
Page size    : 512 B
Block size   : 512 B
Block count  : 15269888
Size         : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info

CID                   : 150100464E31324D42062657A76783B7
Manufacturer ID       : 0X15
Device/BGA            : BGA (Discrete embedded)
OEM/Application ID    : 0X00
Product name          : FN12MB
Product revision      : 0.6
Product serial number : (hex) 2657A767
Manufacturing date    : 08/2016
---------------------------------------------------------------
CSD Info

CSD                   : D02701320F5903FFF6DBFFEF8E40400D
CSD structure         : CSD version No. 1.2
SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                        4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed            : 26 MHz
READ block length     : 512 Bytes
WP group enable       : YES
PERM_WRITE_PROTECT    : NO
TMP_WRITE_PROTECT     : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.7 (for MMC v5.0, v5.01)
Erase block size      : 512 Kbytes
Boot1 size            : 2048 Kbytes
Boot2 size            : 2048 Kbytes
RPMB size             : 128 Kbytes

Partition config      : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK              : No boot acknowledge sent (default)

Boot bus conditions   : (0x00) 00000000
Boot bus width        : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode             : Use single data rate + backward compatible timings in boot operation (default)

RST_n function        : (0x00) RST_n signal is temporary disabled (default)

Partitioning support  : Device supports partitioning features
Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute  : 0x0
Part setting completed: 0x0
GP partition 1 size   : 0 b
GP partition 2 size   : 0 b
GP partition 3 size   : 0 b
GP partition 4 size   : 0 b
Enhanced area size    : (0x0) 0 b
Enhanced area start   : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/FN12MB_09_01_2020_08_52_29.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.0.1; FW: 1.24.
Disconnected.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Voltage   : 1.8V
Bus Mode  : 1 bit
Bus speed : Auto

Connecting...
Device       : Samsung eMMC FN12MB
Page size    : 512 B
Block size   : 512 B
Block count  : 15269888
Size         : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info

CID                   : 150100464E31324D42062657A76783B7
Manufacturer ID       : 0X15
Device/BGA            : BGA (Discrete embedded)
OEM/Application ID    : 0X00
Product name          : FN12MB
Product revision      : 0.6
Product serial number : (hex) 2657A767
Manufacturing date    : 08/2016
---------------------------------------------------------------
CSD Info

CSD                   : D02701320F5903FFF6DBFFEF8E40400D
CSD structure         : CSD version No. 1.2
SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                        4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed            : 26 MHz
READ block length     : 512 Bytes
WP group enable       : YES
PERM_WRITE_PROTECT    : NO
TMP_WRITE_PROTECT     : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.7 (for MMC v5.0, v5.01)
Erase block size      : 512 Kbytes
Boot1 size            : 2048 Kbytes
Boot2 size            : 2048 Kbytes
RPMB size             : 128 Kbytes

Partition config      : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK              : No boot acknowledge sent (default)

Boot bus conditions   : (0x00) 00000000
Boot bus width        : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode             : Use single data rate + backward compatible timings in boot operation (default)

RST_n function        : (0x00) RST_n signal is temporary disabled (default)

Partitioning support  : Device supports partitioning features
Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute  : 0x0
Part setting completed: 0x0
GP partition 1 size   : 0 b
GP partition 2 size   : 0 b
GP partition 3 size   : 0 b
GP partition 4 size   : 0 b
Enhanced area size    : (0x0) 0 b
Enhanced area start   : (0x0) 0 b

[COLOR="#B22222"]---------------------------------------------------------------Searching Android build info...
Not found
-[/COLOR]--------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/FN12MB_09_01_2020_08_52_41.bin.
Connect successful.
---------------------------------------------------------------

عمل FACTORY FORMAT

كود:
[CODE]CSD Info

CSD                   : D02701320F5903FFF6DBFFEF8E40400D
CSD structure         : CSD version No. 1.2
SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                        4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed            : 26 MHz
READ block length     : 512 Bytes
WP group enable       : YES
PERM_WRITE_PROTECT    : NO
TMP_WRITE_PROTECT     : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.7 (for MMC v5.0, v5.01)
Erase block size      : 512 Kbytes
Boot1 size            : 2048 Kbytes
Boot2 size            : 2048 Kbytes
RPMB size             : 128 Kbytes

Partition config      : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK              : No boot acknowledge sent (default)

Boot bus conditions   : (0x00) 00000000
Boot bus width        : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode             : Use single data rate + backward compatible timings in boot operation (default)

RST_n function        : (0x00) RST_n signal is temporary disabled (default)

Partitioning support  : Device supports partitioning features
Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute  : 0x0
Part setting completed: 0x0
GP partition 1 size   : 0 b
GP partition 2 size   : 0 b
GP partition 3 size   : 0 b
GP partition 4 size   : 0 b
Enhanced area size    : (0x0) 0 b
Enhanced area start   : (0x0) 0 b

---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/FN12MB_09_01_2020_08_52_41.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.0.1; FW: 1.24.
Factory Format will erase all eMMC data!
Do you want to continue? Yes.
Formating...Done.
SW: 2.0.1; FW: 1.24.
Disconnected.
WRITE FILE SCATTER

كود:
--------------------------------------------------------------
Selected scatter file: C:/Users/PC/Desktop/MT6582_CUN-U29_HUAWEI CUN-U29_unknown_5.1_HUAWEI_CUN-U29C567B134_2017-08-20 14_33_36/MT6582_Android_scatter_emmc.txt.
Scatter file type 2.
Opened input file: C:/Users/PC/Desktop/MT6582_CUN-U29_HUAWEI CUN-U29_unknown_5.1_HUAWEI_CUN-U29C567B134_2017-08-20 14_33_36/preloader_hq6582_we_b1b_l1.bin

Found 8 eMMC supported CID:

eMMC Vendor ID   : 15 (Samsung eMMC)
eMMC Model ID    : 0001
eMMC Name        : FN12MB
eMMC CID         : 150100464E31324D42

eMMC Vendor ID   : 90 (Hynix eMMC)
eMMC Model ID    : 4A01
eMMC Name        : H8G1e
eMMC CID         : 90014A483847316505

eMMC Vendor ID   : 11 (Toshiba eMMC)
eMMC Model ID    : 0001
eMMC Name        : 008G70
eMMC CID         : 110100303038473730

eMMC Vendor ID   : 90 (Hynix eMMC)
eMMC Model ID    : 4A01
eMMC Name        : HAG4d
eMMC CID         : 90014A484147346404

eMMC Vendor ID   : 11 (Toshiba eMMC)
eMMC Model ID    : 0001
eMMC Name        : 016G94
eMMC CID         : 110100303136473934

eMMC Vendor ID   : 15 (Samsung eMMC)
eMMC Model ID    : 0001
eMMC Name        : K8XVMB
eMMC CID         : 1501004B3858564D42

eMMC Vendor ID   : 90 (Hynix eMMC)
eMMC Model ID    : 4A01
eMMC Name        : H8G4a2
eMMC CID         : 90014A483847346132

eMMC Vendor ID   : 15 (Samsung eMMC)
eMMC Model ID    : 0001
eMMC Name        : FNX2MB
eMMC CID         : 150100464E58324D42

Writing. Please wait...
Write data verification is enabled.
Writing partition PRELOADER...	Write data verification is enabled.
Done.
Writing partition MBR...	Done.
Writing partition EBR1...	Done.
Writing partition PRO_INFO...	Done.
Writing partition NVRAM...	Done.
Writing partition PROTECT_F...	Done.
Writing partition PROTECT_S...	Done.
Writing partition OEMINFO...	Done.
Writing partition SECCFG...	Done.
Writing partition UBOOT...	Done.
Writing partition BOOTIMG...	Done.
Writing partition RECOVERY...	Done.
Writing partition SEC_RO...	Done.
Writing partition MISC...	Done.
Writing partition LOGO...	Done.
Writing partition EBR2...	Done.
Writing partition EXPDB...	Done.
Writing partition FRP...	Done.
Writing partition ROOTM...	Done.
Writing partition ANDROID...	Done.
Writing partition CUST...	Done.
Writing partition CACHE...	Done.
Writing partition USRDATA...	Done.
Writing checksums...Done.
Writing finished.
SW: 2.0.1; FW: 1.24

215441420.png
[/IMG]

للمتابعة ايضا :
http://forum.gsmhosting.com/vbb/f664/huawei-cun-u29-repaire-emmc-2763881-new/
و في الاخير تحياتي لكم
 

dawmi

عضو أساسي
إنضم
6 أغسطس 2018
المشاركات
825
مستوى التفاعل
105
النقاط
43
رد: حصريا ربير huawei cun-u29

بارك الله فيك اخي محمد
 

DZ-Djamel-GSM

:: مراقب عام ::
إنضم
9 يوليو 2018
المشاركات
5,452
مستوى التفاعل
4,334
النقاط
113
الإقامة
DzGsm
رد: حصريا ربير huawei cun-u29

السلام عليكم

بارك الله فيك أخي دحماني الله يجازيك كل خير
 

dahmani med

:: مراقب قسم العام + قسم الهاردوير والصيانة ::
إنضم
19 أغسطس 2012
المشاركات
3,397
مستوى التفاعل
7,523
النقاط
113
الإقامة
EL ASSAFIA **LAGHOUAT

pera

:: عضو محترف ::, ,
إنضم
19 مايو 2016
المشاركات
1,825
مستوى التفاعل
1,584
النقاط
113
رد: حصريا ربير huawei cun-u29

السلام عليكم
بارك الله فيك اخي
 

.:: Mohamed Gsm ::.

:: مراقب البوكسات والبرامج المحمية ::
إنضم
2 أبريل 2017
المشاركات
5,098
مستوى التفاعل
5,328
النقاط
113
الإقامة
سيدي بلعباس
رد: حصريا ربير huawei cun-u29

بارك الله فيك محمد خويا

هذاك الهاتف مولاه مخلانيش نخدمه / مقلق
وهذي خدمة لازم تكون مريح ليها تكون ريلاكس
 

فيصل16

:: مشرف قسم Sigma/Z3x/Octoplus ::
إنضم
16 سبتمبر 2012
المشاركات
3,115
مستوى التفاعل
2,950
النقاط
113
رد: حصريا ربير huawei cun-u29

شكرا لك اخي دحماني على عرض التجربة
 

abdeabaki

عضو نشط
إنضم
25 نوفمبر 2015
المشاركات
57
مستوى التفاعل
23
النقاط
0
رد: حصريا ربير huawei cun-u29

981506075.png


السلام عليكم ورحمة الله وبركاته
اقدم لكم طريقة حل مشكل في الذاكرة EMMC
هدية لاخي Simo Mohamed Gsm عن موضوعه[
/SIZE]
[/B][/COLOR] https://www.dzgsm.com/vb/threads/74801-pin-out-emmc-emmc-huawei-cun-u29/

CONECT EMMC AND LOGO

كود:
Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Voltage   : 1.8V
Bus Mode  : 1 bit
Bus speed : Auto

Connecting...
Device       : Samsung eMMC FN12MB
Page size    : 512 B
Block size   : 512 B
Block count  : 15269888
Size         : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info

CID                   : 150100464E31324D42062657A76783B7
Manufacturer ID       : 0X15
Device/BGA            : BGA (Discrete embedded)
OEM/Application ID    : 0X00
Product name          : FN12MB
Product revision      : 0.6
Product serial number : (hex) 2657A767
Manufacturing date    : 08/2016
---------------------------------------------------------------
CSD Info

CSD                   : D02701320F5903FFF6DBFFEF8E40400D
CSD structure         : CSD version No. 1.2
SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                        4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed            : 26 MHz
READ block length     : 512 Bytes
WP group enable       : YES
PERM_WRITE_PROTECT    : NO
TMP_WRITE_PROTECT     : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.7 (for MMC v5.0, v5.01)
Erase block size      : 512 Kbytes
Boot1 size            : 2048 Kbytes
Boot2 size            : 2048 Kbytes
RPMB size             : 128 Kbytes

Partition config      : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK              : No boot acknowledge sent (default)

Boot bus conditions   : (0x00) 00000000
Boot bus width        : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode             : Use single data rate + backward compatible timings in boot operation (default)

RST_n function        : (0x00) RST_n signal is temporary disabled (default)

Partitioning support  : Device supports partitioning features
Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute  : 0x0
Part setting completed: 0x0
GP partition 1 size   : 0 b
GP partition 2 size   : 0 b
GP partition 3 size   : 0 b
GP partition 4 size   : 0 b
Enhanced area size    : (0x0) 0 b
Enhanced area start   : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/FN12MB_09_01_2020_08_52_29.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.0.1; FW: 1.24.
Disconnected.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Voltage   : 1.8V
Bus Mode  : 1 bit
Bus speed : Auto

Connecting...
Device       : Samsung eMMC FN12MB
Page size    : 512 B
Block size   : 512 B
Block count  : 15269888
Size         : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info

CID                   : 150100464E31324D42062657A76783B7
Manufacturer ID       : 0X15
Device/BGA            : BGA (Discrete embedded)
OEM/Application ID    : 0X00
Product name          : FN12MB
Product revision      : 0.6
Product serial number : (hex) 2657A767
Manufacturing date    : 08/2016
---------------------------------------------------------------
CSD Info

CSD                   : D02701320F5903FFF6DBFFEF8E40400D
CSD structure         : CSD version No. 1.2
SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                        4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed            : 26 MHz
READ block length     : 512 Bytes
WP group enable       : YES
PERM_WRITE_PROTECT    : NO
TMP_WRITE_PROTECT     : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.7 (for MMC v5.0, v5.01)
Erase block size      : 512 Kbytes
Boot1 size            : 2048 Kbytes
Boot2 size            : 2048 Kbytes
RPMB size             : 128 Kbytes

Partition config      : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK              : No boot acknowledge sent (default)

Boot bus conditions   : (0x00) 00000000
Boot bus width        : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode             : Use single data rate + backward compatible timings in boot operation (default)

RST_n function        : (0x00) RST_n signal is temporary disabled (default)

Partitioning support  : Device supports partitioning features
Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute  : 0x0
Part setting completed: 0x0
GP partition 1 size   : 0 b
GP partition 2 size   : 0 b
GP partition 3 size   : 0 b
GP partition 4 size   : 0 b
Enhanced area size    : (0x0) 0 b
Enhanced area start   : (0x0) 0 b

[COLOR="#B22222"]---------------------------------------------------------------Searching Android build info...
Not found
-[/COLOR]--------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/FN12MB_09_01_2020_08_52_41.bin.
Connect successful.
---------------------------------------------------------------

عمل FACTORY FORMAT

كود:
[CODE]CSD Info

CSD                   : D02701320F5903FFF6DBFFEF8E40400D
CSD structure         : CSD version No. 1.2
SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                        4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed            : 26 MHz
READ block length     : 512 Bytes
WP group enable       : YES
PERM_WRITE_PROTECT    : NO
TMP_WRITE_PROTECT     : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.7 (for MMC v5.0, v5.01)
Erase block size      : 512 Kbytes
Boot1 size            : 2048 Kbytes
Boot2 size            : 2048 Kbytes
RPMB size             : 128 Kbytes

Partition config      : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK              : No boot acknowledge sent (default)

Boot bus conditions   : (0x00) 00000000
Boot bus width        : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode             : Use single data rate + backward compatible timings in boot operation (default)

RST_n function        : (0x00) RST_n signal is temporary disabled (default)

Partitioning support  : Device supports partitioning features
Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute  : 0x0
Part setting completed: 0x0
GP partition 1 size   : 0 b
GP partition 2 size   : 0 b
GP partition 3 size   : 0 b
GP partition 4 size   : 0 b
Enhanced area size    : (0x0) 0 b
Enhanced area start   : (0x0) 0 b

---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/FN12MB_09_01_2020_08_52_41.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.0.1; FW: 1.24.
Factory Format will erase all eMMC data!
Do you want to continue? Yes.
Formating...Done.
SW: 2.0.1; FW: 1.24.
Disconnected.
WRITE FILE SCATTER

كود:
--------------------------------------------------------------
Selected scatter file: C:/Users/PC/Desktop/MT6582_CUN-U29_HUAWEI CUN-U29_unknown_5.1_HUAWEI_CUN-U29C567B134_2017-08-20 14_33_36/MT6582_Android_scatter_emmc.txt.
Scatter file type 2.
Opened input file: C:/Users/PC/Desktop/MT6582_CUN-U29_HUAWEI CUN-U29_unknown_5.1_HUAWEI_CUN-U29C567B134_2017-08-20 14_33_36/preloader_hq6582_we_b1b_l1.bin

Found 8 eMMC supported CID:

eMMC Vendor ID   : 15 (Samsung eMMC)
eMMC Model ID    : 0001
eMMC Name        : FN12MB
eMMC CID         : 150100464E31324D42

eMMC Vendor ID   : 90 (Hynix eMMC)
eMMC Model ID    : 4A01
eMMC Name        : H8G1e
eMMC CID         : 90014A483847316505

eMMC Vendor ID   : 11 (Toshiba eMMC)
eMMC Model ID    : 0001
eMMC Name        : 008G70
eMMC CID         : 110100303038473730

eMMC Vendor ID   : 90 (Hynix eMMC)
eMMC Model ID    : 4A01
eMMC Name        : HAG4d
eMMC CID         : 90014A484147346404

eMMC Vendor ID   : 11 (Toshiba eMMC)
eMMC Model ID    : 0001
eMMC Name        : 016G94
eMMC CID         : 110100303136473934

eMMC Vendor ID   : 15 (Samsung eMMC)
eMMC Model ID    : 0001
eMMC Name        : K8XVMB
eMMC CID         : 1501004B3858564D42

eMMC Vendor ID   : 90 (Hynix eMMC)
eMMC Model ID    : 4A01
eMMC Name        : H8G4a2
eMMC CID         : 90014A483847346132

eMMC Vendor ID   : 15 (Samsung eMMC)
eMMC Model ID    : 0001
eMMC Name        : FNX2MB
eMMC CID         : 150100464E58324D42

Writing. Please wait...
Write data verification is enabled.
Writing partition PRELOADER...	Write data verification is enabled.
Done.
Writing partition MBR...	Done.
Writing partition EBR1...	Done.
Writing partition PRO_INFO...	Done.
Writing partition NVRAM...	Done.
Writing partition PROTECT_F...	Done.
Writing partition PROTECT_S...	Done.
Writing partition OEMINFO...	Done.
Writing partition SECCFG...	Done.
Writing partition UBOOT...	Done.
Writing partition BOOTIMG...	Done.
Writing partition RECOVERY...	Done.
Writing partition SEC_RO...	Done.
Writing partition MISC...	Done.
Writing partition LOGO...	Done.
Writing partition EBR2...	Done.
Writing partition EXPDB...	Done.
Writing partition FRP...	Done.
Writing partition ROOTM...	Done.
Writing partition ANDROID...	Done.
Writing partition CUST...	Done.
Writing partition CACHE...	Done.
Writing partition USRDATA...	Done.
Writing checksums...Done.
Writing finished.
SW: 2.0.1; FW: 1.24

215441420.png
[/IMG]

للمتابعة ايضا :
http://forum.gsmhosting.com/vbb/f664/huawei-cun-u29-repaire-emmc-2763881-new/
و في الاخير تحياتي لكم

شكرا على التجربة..... فقط أريد معرفة طريقة تطبيق المرحلة الأولى على دونغل cm2
 

imad_gsm

عضو أساسي
إنضم
14 يوليو 2014
المشاركات
1,031
مستوى التفاعل
144
النقاط
63
الإقامة
الجزائر
رد: حصريا ربير huawei cun-u29

السلام عليكم اخي دحماني هل ممكن نقاط التوصيل المباشر دون نزع الذاكرة
 
التعديل الأخير:
أعلى