اقدم لكم اعضاء و زوار المنتدى فلاشة ARCHOS 50 DIAMOND مسحوبة بدونجل Ultimate Multi Tool - QcFire
الفلاشة مجربة %100
الهاتف:
انفو الهاتف:
كود:
Operation : Read InformationChecking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM32)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1B09000 [8936] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [2]
Preparing Loader...Done
Sending Loader [8936_036]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8936, eMMC, 16 GB
LU Count : 1 [0x01D5C000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : archos Archos 50 Diamond [msm8916] [ac50da]
Software : KTU84P.20150420.124756, 20150420.124756 [Mon Apr 20 12:47:56 UTC 2015]
Android Ver. : 4.4.4
USERDATA : Normal
You can use RESET LOCKS to remove Pin/Pattern/Password WITHOUT Data Loss.
Operation Finished.
QcFire Ver. 5.1انفو السحب:
كود:
Operation : Read FirmwareChecking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM32)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1B09000 [8936] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [2]
Preparing Loader...Done
Sending Loader [8936_036]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8936, eMMC, 16 GB
LU Count : 1 [0x01D5C000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
USERDATA : Normal
Reading Device Information...OK
Device : archos Archos 50 Diamond [msm8916] [ac50da]
Software : KTU84P.20150420.124756, 20150420.124756 [Mon Apr 20 12:47:56 UTC 2015]
Android Ver. : 4.4.4
Reading [modem]...Done
Reading [sbl1]...Done
Reading [sbl1bak]...Done
Reading [aboot]...Done
Reading [abootbak]...Done
Reading [rpm]...Done
Reading [rpmbak]...Done
Reading [tz]...Done
Reading [tzbak]...Done
Reading [hyp]...Done
Reading [hypbak]...Done
Reading [misc]...Done
Reading [splash]...Done
Reading [DDR]...Done
Reading [sec]...Done
Reading [boot]...Done
Reading [system]...Done
Reading [persist]...Done
Reading [cache]...Done
Reading [recovery]...Done
Reading [userdata]...Done
Reading [gpt_main0]...Done
Reading [gpt_back0]...Done
Saved to : C:\UMTool\QcFire\Read\archos_Archos 50 Diamond_KTU84P.20150420.124756\
Operation Finished.
QcFire Ver. 5.1الفلاشة:
https://mega.nz/#!I48AXYBL!k47BDQ-EClqpiRVMzqSzbYeRPyWDZCfYbvxZ-kpBwco
ملف EFS:
https://mega.nz/#!1k8gHQrQ!qyEQV4fJ5vYA4IpdzI1x04vCf48enp374YZHjJ3iDuA
تمت تجربة الفلاشة على هاتف متوقف على اللوغو
كود:
Operation : FlashChecking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM32)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1B09000 [8936] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [2]
Preparing Loader...Done
Sending Loader [8936_036]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8936, eMMC, 16 GB
LU Count : 1 [0x01D5C000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512
Writing [modem_0.img] -> [modem]...Done
Writing [sbl1_0.img] -> [sbl1]...Done
Writing [sbl1bak_0.img] -> [sbl1bak]...Done
Writing [aboot_0.img] -> [aboot]...Done
Writing [abootbak_0.img] -> [abootbak]...Done
Writing [rpm_0.img] -> [rpm]...Done
Writing [rpmbak_0.img] -> [rpmbak]...Done
Writing [tz_0.img] -> [tz]...Done
Writing [tzbak_0.img] -> [tzbak]...Done
Writing [hyp_0.img] -> [hyp]...Done
Writing [hypbak_0.img] -> [hypbak]...Done
Writing [misc_0.img] -> [misc]...Done
Writing [splash_0.img] -> [splash]...Done
Writing [DDR_0.img] -> [DDR]...Done
Writing [sec_0.img] -> [sec]...Done
Writing [boot_0.img] -> [boot]...Done
Writing [system_0.img] -> [system]...Done
Writing [persist_0.img] -> [persist]...Done
Writing [cache_0.img] -> [cache]...Done
Writing [recovery_0.img] -> [recovery]...Done
Writing [userdata_0.img] -> [userdata]...Done
Writing [gpt_main0.bin] -> [gpt_main0] ...Done
Writing [gpt_back0.bin] -> [gpt_back0] ...Done
Applying Patches................Done
Resetting device...Done
Operation Finished.
QcFire Ver. 5.1ملاحضة: يجب فرمطة الهاتف من الركوفري مود ادا بقي على الافتتاحية
