النتائج 1 إلى 3 من 3

الموضوع: فلاشة هاتف asus_x018d

  1. Top | #1

    ::عضو مميز::

    تاريخ التسجيل
    Feb 2016
    الإقامة
    TIARET
    المشاركات
    672
    معدل تقييم المستوى
    53
    الشكر
    118
    تم شكره 493 في 73 مشاركة.

    افتراضي فلاشة هاتف asus_x018d

    السلام عليكم و رحمة الله تعالى و بركاته

    تم بحمد الله سحب فلاشة asus_x018d بواسطة العملاق CM2MT2 و الميراكل



    فلاشة هاتف asus_x018d


    فلاشة هاتف asus_x018d


    فلاشة هاتف asus_x018d


    التبويت زر خفض الصوت و ايصال الكابل


    بخاصية CM2MT2 Memory Tool

    انفو الهاتف

    كود:
    Operation : Identify [ v2.06 ]
    
    1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
    2. Insert USB cable in phone
    Waiting for device connection ...
    
    PTFN : MediaTek USB Port (COM4)
    MODE : BOOTROM
    PORT : 4
    Waiting BOOT ack ...
    BROM : Skip ACK verify
    BROM : Init BROM
    BROM init passed!
         CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
         TYPE : MODERN RAPHAEL
    BROM : SecLevel : 0x00000005
    BROM : SecMode  : SBC+SDA
    BROM : BOOTROM
    MODE : 0_base : BASE_v1712 | Manual : Enabled
    BROM : SLA
    BROM : SLA Passed!
    BROM : SLA CHLNG not used
    AGENT : Look for suitable BootChain in DA ... 
    AGENT : MTK_AllInOne_DA.bin
    AGENT : Found MT6755
    AGENT : MTK_DOWNLOAD_AGENT
         BROM : Sending 1st DA ...
    BROM : DA sent
    BROM :Transfer control to DA ... 
         DA : AGENT started!
    DA : SYNC
         DA : MODE : BROM
    DA : EXT_RAM NOT initialized!
         EMI : DEV : MT6755
         EMI : SRC : preloader_oppo6750_15131.bin
         EMI : CNT : 0009
         EMI : [00] : eMCP : eMMC+LP/DDR3 , ID : 150100524531424D42 : VEN : SAMSUNG   | DEV : RE1BMB : RAM : [ 3,00 GB ]
         EMI : [01] : eMCP : eMMC+LP/DDR3 , ID : 90014A484247346132 : VEN : HYNIX     | DEV : HBG4a2 : RAM : [ 3,00 GB ]
         EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100525831424D42 : VEN : SAMSUNG   | DEV : RX1BMB : RAM : [ 3,00 GB ]
         EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 13014E51334A393756 : VEN : MICRON    | DEV : Q3J97V : RAM : [ 3,00 GB ]
         EMI : [04] : eMCP : eMMC+LP/DDR3 , ID : 150100525831344D42 : VEN : SAMSUNG   | DEV : RX14MB : RAM : [ 4,00 GB ]
         EMI : [05] : eMCP : eMMC+LP/DDR3 , ID : 13014E51334A393757 : VEN : MICRON    | DEV : Q3J97W : RAM : [ 4,00 GB ]
         EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 150100524331344D42 : VEN : SAMSUNG   | DEV : RC14MB : RAM : [ 4,00 GB ]
         EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344D42 : VEN : SAMSUNG   | DEV : RH64MB : RAM : [ 4,00 GB ]
         EMI : [08] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN   | DEV :  : RAM : [ 4,00 GB ]
         EMI : Init EMI from PRELOADER
         EMI : EXT_RAM CFG Passed!
    DA : BOOT to 2nd DA ...
    DA : 2ND stage confirmed!
    DA : SYNC with DA passed!
    DA : Receiving HW info
    
            SRAM: 0x00040000 [ 256,00 KB ]
            DRAM: 0xC0000000 [ 3,00 GB ]
    
            EMMC: 150100524331344D42075A85DE49642F
            EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RC14MB
            EMMC: 
                  BOOT1  : 0x00400000 [ 4,00 MB ]
                  BOOT2  : 0x00400000 [ 4,00 MB ]
                  RPMB   : 0x00400000 [ 4,00 MB ]
                  USER   : 0xE8F800000 [ 58,24 GB ]
    
            CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000
    
            RNID : 5095518FE7A5D14DB0EBAE3A14E1DDB
    
    DA : USB : FULL-SPEED
    DA : USB : Change Port Speed
    PTFN : MediaTek DA USB VCOM (Android) (COM10)
    MODE : PRELOADER PORT
    PORT : 10
    
    Boot done!
    
    Patch Level    : O11019
    Ver. CodeName  : REL
    Ver. Release   : 8.1.0
    Sec. Patch     : 2018-11-05
    Build Time     : 1543572653
    Product Brand  : asus
    Product Name   : WW_X018
    Product Manfct : asus
    Product Info   : ASUS_X018D
    Display ID     : WW_Phone-15.02.1810.380-20181130
    Board Platform : mt6750
    Display ID     : WW_Phone-15.02.1810.380-20181130
    Product Model  : ASUS_X018D
    
    USERDATA : ENCRYPTED 
    
    
    Done!
    Elapsed: 00:00:19


    بيانات سحب الفلاشة

    كود:
    Operation : Memory Tool Init [ v2.06 ]
    
    1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
    2. Insert USB cable in phone
    Waiting for device connection ...
    
    PTFN : MediaTek USB Port (COM4)
    MODE : BOOTROM
    PORT : 4
    Waiting BOOT ack ...
    BROM : Skip ACK verify
    BROM : Init BROM
    BROM init passed!
         CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
         TYPE : MODERN RAPHAEL
    BROM : SecLevel : 0x00000005
    BROM : SecMode  : SBC+SDA
    BROM : BOOTROM
    MODE : 0_base : BASE_v1712 | Manual : Enabled
    BROM : SLA
    BROM : SLA Passed!
    BROM : SLA CHLNG not used
    AGENT : Look for suitable BootChain in DA ... 
    AGENT : MTK_AllInOne_DA.bin
    AGENT : Found MT6755
    AGENT : MTK_DOWNLOAD_AGENT
         BROM : Sending 1st DA ...
    BROM : DA sent
    BROM :Transfer control to DA ... 
         DA : AGENT started!
    DA : SYNC
         DA : MODE : BROM
    DA : EXT_RAM NOT initialized!
         EMI : DEV : MT6755
         EMI : SRC : preloader_oppo6750_15131.bin
         EMI : CNT : 0009
         EMI : [00] : eMCP : eMMC+LP/DDR3 , ID : 150100524531424D42 : VEN : SAMSUNG   | DEV : RE1BMB : RAM : [ 3,00 GB ]
         EMI : [01] : eMCP : eMMC+LP/DDR3 , ID : 90014A484247346132 : VEN : HYNIX     | DEV : HBG4a2 : RAM : [ 3,00 GB ]
         EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100525831424D42 : VEN : SAMSUNG   | DEV : RX1BMB : RAM : [ 3,00 GB ]
         EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 13014E51334A393756 : VEN : MICRON    | DEV : Q3J97V : RAM : [ 3,00 GB ]
         EMI : [04] : eMCP : eMMC+LP/DDR3 , ID : 150100525831344D42 : VEN : SAMSUNG   | DEV : RX14MB : RAM : [ 4,00 GB ]
         EMI : [05] : eMCP : eMMC+LP/DDR3 , ID : 13014E51334A393757 : VEN : MICRON    | DEV : Q3J97W : RAM : [ 4,00 GB ]
         EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 150100524331344D42 : VEN : SAMSUNG   | DEV : RC14MB : RAM : [ 4,00 GB ]
         EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344D42 : VEN : SAMSUNG   | DEV : RH64MB : RAM : [ 4,00 GB ]
         EMI : [08] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN   | DEV :  : RAM : [ 4,00 GB ]
         EMI : Init EMI from PRELOADER
         EMI : EXT_RAM CFG Passed!
    DA : BOOT to 2nd DA ...
    DA : 2ND stage confirmed!
    DA : SYNC with DA passed!
    DA : Receiving HW info
    
            SRAM: 0x00040000 [ 256,00 KB ]
            DRAM: 0xC0000000 [ 3,00 GB ]
    
            EMMC: 150100524331344D42075A85DE49642F
            EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RC14MB
            EMMC: 
                  BOOT1  : 0x00400000 [ 4,00 MB ]
                  BOOT2  : 0x00400000 [ 4,00 MB ]
                  RPMB   : 0x00400000 [ 4,00 MB ]
                  USER   : 0xE8F800000 [ 58,24 GB ]
    
            CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000
    
            RNID : 5095518FE7A5D14DB0EBAE3A14E1DDB
    
    DA : USB : FULL-SPEED
    DA : USB : Change Port Speed
    PTFN : MediaTek DA USB VCOM (Android) (COM10)
    MODE : PRELOADER PORT
    PORT : 10
    
    Boot done!
    
    Set default path : C:\InfinityBox\CM2MT2\phdata\
    
    Ready!
    
    Operation : Read Memory
    
    Reading selected partitions [36]
    [0] Read partition : PRELOADER
    Saved to : C:\InfinityBox\CM2MT2\phdata\PRELOADER.bin
    [1] Read partition : PGPT
    Saved to : C:\InfinityBox\CM2MT2\phdata\PGPT.bin
    [2] Read partition : RECOVERY
    Saved to : C:\InfinityBox\CM2MT2\phdata\RECOVERY.bin
    [3] Read partition : PARA
    Saved to : C:\InfinityBox\CM2MT2\phdata\PARA.bin
    [4] Read partition : FACTORY
    Saved to : C:\InfinityBox\CM2MT2\phdata\FACTORY.bin
    [5] Read partition : APD
    Saved to : C:\InfinityBox\CM2MT2\phdata\APD.bin
    [6] Read partition : ADF
    Saved to : C:\InfinityBox\CM2MT2\phdata\ADF.bin
    [7] Read partition : ASUSFW
    Saved to : C:\InfinityBox\CM2MT2\phdata\ASUSFW.bin
    [8] Read partition : EXPDB
    Saved to : C:\InfinityBox\CM2MT2\phdata\EXPDB.bin
    [9] Read partition : FRP
    Saved to : C:\InfinityBox\CM2MT2\phdata\FRP.bin
    [10] Read partition : PPL
    Saved to : C:\InfinityBox\CM2MT2\phdata\PPL.bin
    [11] Read partition : NVDATA
    Saved to : C:\InfinityBox\CM2MT2\phdata\NVDATA.bin
    [12] Read partition : METADATA
    Saved to : C:\InfinityBox\CM2MT2\phdata\METADATA.bin
    [13] Read partition : PROTECT1
    Saved to : C:\InfinityBox\CM2MT2\phdata\PROTECT1.bin
    [14] Read partition : PROTECT2
    Saved to : C:\InfinityBox\CM2MT2\phdata\PROTECT2.bin
    [15] Read partition : SECCFG
    Saved to : C:\InfinityBox\CM2MT2\phdata\SECCFG.bin
    [16] Read partition : OEMKEYSTORE
    Saved to : C:\InfinityBox\CM2MT2\phdata\OEMKEYSTORE.bin
    [17] Read partition : PROINFO
    Saved to : C:\InfinityBox\CM2MT2\phdata\PROINFO.bin
    [18] Read partition : MD1IMG
    Saved to : C:\InfinityBox\CM2MT2\phdata\MD1IMG.bin
    [19] Read partition : MD1DSP
    Saved to : C:\InfinityBox\CM2MT2\phdata\MD1DSP.bin
    [20] Read partition : MD1ARM7
    Saved to : C:\InfinityBox\CM2MT2\phdata\MD1ARM7.bin
    [21] Read partition : MD3IMG
    Saved to : C:\InfinityBox\CM2MT2\phdata\MD3IMG.bin
    [22] Read partition : NVRAM
    Saved to : C:\InfinityBox\CM2MT2\phdata\NVRAM.bin
    [23] Read partition : LK
    Saved to : C:\InfinityBox\CM2MT2\phdata\LK.bin
    [24] Read partition : LK2
    Saved to : C:\InfinityBox\CM2MT2\phdata\LK2.bin
    [25] Read partition : BOOT
    Saved to : C:\InfinityBox\CM2MT2\phdata\BOOT.bin
    [26] Read partition : LOGO
    Saved to : C:\InfinityBox\CM2MT2\phdata\LOGO.bin
    [27] Read partition : TEE1
    Saved to : C:\InfinityBox\CM2MT2\phdata\TEE1.bin
    [28] Read partition : TEE2
    Saved to : C:\InfinityBox\CM2MT2\phdata\TEE2.bin
    [29] Read partition : SECRO
    Saved to : C:\InfinityBox\CM2MT2\phdata\SECRO.bin
    [30] Read partition : KEYSTORE
    Saved to : C:\InfinityBox\CM2MT2\phdata\KEYSTORE.bin
    [31] Read partition : SYSTEM
    Saved to : C:\InfinityBox\CM2MT2\phdata\SYSTEM.bin
    [32] Read partition : CACHE
    Saved to : C:\InfinityBox\CM2MT2\phdata\CACHE.bin
    [33] Read partition : USERDATA
    Saved to : C:\InfinityBox\CM2MT2\phdata\USERDATA.bin
    [34] Read partition : FLASHINFO
    Saved to : C:\InfinityBox\CM2MT2\phdata\FLASHINFO.bin
    [35] Read partition : SGPT
    Saved to : C:\InfinityBox\CM2MT2\phdata\SGPT.bin
    
    Operation finished!


    التحميل

    الروابط تظهر للاعضاء فقط



    انفو الهاتف على الميراكل

    كود:
    Definition Applied 1. Power Off Phone , Remove Battery, Insert Battery Back 2. Insert USB cable. In some cases Required Hold BootKey 3. Use Miracle Boot Key In cases Boot key not Find 4. Battery Should be Charged more then 50% Waiting for USB Port... Set COM3 Connecting to Phone,Wait.. Connected to Phone. CPU: MT6580 SW:0000 Ver: CA00 Downloading Boot8 ... EMMC Size: 0x01D2000000 Flash Type: EMMC INT/EXT RAM Size: 0x20000/0x40000000 Reading infr(EMMC)... id:WW_Phone-15.02.1810.380-20181130 version:8.1.0 model:ASUS_X018D brand:asus manufacturer:asus >>Done.
    بيانات سحب الفلاشة

    كود:
    Definition Applied 1. Power Off Phone , Remove Battery, Insert Battery Back 2. Insert USB cable. In some cases Required Hold BootKey 3. Use Miracle Boot Key In cases Boot key not Find 4. Battery Should be Charged more then 50% Waiting for USB Port... Set MediaTek USB Port (COM4) Connecting to Phone,Wait.. Connected to Phone. CPU: MT6755 SW:0001 Ver: CB00 Downloading Boot(External) ... EMMC Size: 0x0E8F800000 Flash Type: EMMC INT/EXT RAM Size: 0x40000/0xC0000000 Waiting for USB Port... Set MediaTek DA USB VCOM (Android) (COM10) Reading infr(EMMC)... version:8.1.0 brand:asus manufacturer:asus id:WW_Phone-15.02.1810.380-20181130 id:WW_Phone-15.02.1810.380-20181130 model:ASUS_X018D Done. Definition Applied 1. Power Off Phone , Remove Battery, Insert Battery Back 2. Insert USB cable. In some cases Required Hold BootKey 3. Use Miracle Boot Key In cases Boot key not Find 4. Battery Should be Charged more then 50% Waiting for USB Port... Set MediaTek USB Port (COM4) Connecting to Phone,Wait.. Connected to Phone. CPU: MT6755 SW:0001 Ver: CB00 Downloading Boot(External) ... EMMC Size: 0x0E8F800000 Flash Type: EMMC INT/EXT RAM Size: 0x40000/0xC0000000 Waiting for USB Port... Set MediaTek DA USB VCOM (Android) (COM10) Reading preloader... Reading recovery... Reading frp... Reading md1img... Reading md1dsp... Reading md1arm7... Reading md3img... Reading nvram... Reading lk... Reading lk2... Reading boot... Reading logo... Reading tee1... Reading tee2... Reading secro... Reading system... Reading cache... Saving as scatter file... >>Done!

    التحميل

    الروابط تظهر للاعضاء فقط



    الفلاشة مرفق معها ملفات البوت

    عذرا على عدم تنسيق الموضوع لضيق الوقت

  2. 5 من أعضاء المنتدى أعجبوا بمشاركة دراجي سوفت


  3. Top | #2

    عضو مميز
    تاريخ التسجيل
    Apr 2016
    الإقامة
    BLIDA BLIDA
    المشاركات
    364
    معدل تقييم المستوى
    56
    الشكر
    558
    تم شكره 128 في 44 مشاركة.

    افتراضي رد: فلاشة هاتف asus_x018d

    بارك الله فيك وشكرا على المشاركة

  4. Top | #3

    :: مراقب عام ::
    تاريخ التسجيل
    Jul 2018
    الإقامة
    DzGsm
    المشاركات
    3,063
    معدل تقييم المستوى
    533
    الشكر
    2,862
    تم شكره 1,106 في 98 مشاركة.

    افتراضي رد: فلاشة هاتف asus_x018d

    السلام عليكم

    بارك الله فيك عمل رائع واصل العمل يا أخي شكراً لك

المواضيع المتشابهه

  1. فلاشة هاتف asus_x018d
    بواسطة دراجي سوفت في المنتدى قسم أسوس (ASUS)
    مشاركات: 2
    آخر مشاركة: 07-11-2019, 15:20
  2. مشاركات: 37
    آخر مشاركة: 04-05-2017, 22:05
  3. فلاشة هاتف LOGICOM l-ement401 مأخوذة من هاتف سليم .
    بواسطة DZGSM.14 في المنتدى قسم الأنواع الأخرى
    مشاركات: 14
    آخر مشاركة: 19-02-2017, 10:16

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •  
Powered by vBulletin® Copyright © 2020 vBulletin Solutions, Inc. All rights reserved.