تجارب الأعضاء الناجحة على واجهة UMT Dongle

فيصل16

فيصل16

:: مشرف قسم Sigma/Z3x/Octoplus ::
إنضم
16 سبتمبر 2012
المشاركات
3,136
مستوى التفاعل
2,975
النقاط
113
Huawei GR5 (BLL-L21) FRP Reset

Huawei GR5 (BLL-L21) FRP Reset

21072210212246113.png
​

كود: 
Brand	: HuaweiModel	: [COLOR=#ff0000]GR5 BLL-L21[/COLOR]
Operation	: Reset FRP
Enabling ADB Mode...OK
Waiting for device...Found!
Model	: BLL-L21
Version	: 7.0
Build	: BLL-L21-user 7.0 HUAWEIBLL-L21C185B381 release-keys
Hardware	: hi6250
[COLOR=#ff0000]Removing FRP Lock...Done[/COLOR]
Operation Finished.
UltimateFRP Ver. 0.5.1
 
ProfKefah

ProfKefah

:: Super User ::
إنضم
13 سبتمبر 2015
المشاركات
3,906
مستوى التفاعل
7,659
النقاط
113
الإقامة
العالم الاسلامي
ازالة قفل frp لجهاز Nokia 3.2 TA-1156 بوضع EDL بالتيست بوينت

صورة نقاط الاختبار التيست بوينت


0657.jpeg




كود: 
Device    : Nokia 3.2 (TA-1156)
Operation    : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM30)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID    : E1E00B00 [8937] 71953500
OPK_DATA    : 561ABA875220DEA1B37EDA7DF0CB9D6458C3F0B62EADE954C407F8E1C08641D2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_037]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8937, EMMC, 16 GB
LU Count    : 1 [0x01D1F000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device    : HMD Global Nokia 3.2 [DPL_sprout]
Brand    : Nokia
Prod.Name    : Deadpool_00WW
Software    : 00WW_3_140, 00WW_3_140 [Fri Feb 26 23:15:44 CST 2021]
Android Ver.    : 11
Patch Level    : 2021-03-05
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 7.1.0



Ashampoo_Snap_07__2021_17h10m2
 
فيصل16

فيصل16

:: مشرف قسم Sigma/Z3x/Octoplus ::
إنضم
16 سبتمبر 2012
المشاركات
3,136
مستوى التفاعل
2,975
النقاط
113
SAMSUNG J1 MINI PRIME (SM-J106F/DS) FRP Reset

SAMSUNG J1 MINI PRIME (SM-J106F/DS) FRP Reset

210813070522503156.png
​

كود: 
rand	: SamsungModel	: [COLOR=#ff0000]J106F[/COLOR]
Operation	: Reset FRP
Searching for Phone...Found
Port: 	: COM6 : SAMSUNG Mobile USB Modem #2
Checking for Device...Found [Download Mode]
Reading Data from Phone...Done
Chipset	: SPRD8735 [HiSpeed]
Loading Data...OK
[COLOR=#ff0000]Resetting FRP Data...OK[/COLOR]
Closing Session...Done
---------------- IMPORTANT ----------------
Wait for phone to turn on completely.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Operation Finished.
UltimateFRP Ver. 0.5.1
 
فيصل16

فيصل16

:: مشرف قسم Sigma/Z3x/Octoplus ::
إنضم
16 سبتمبر 2012
المشاركات
3,136
مستوى التفاعل
2,975
النقاط
113
Samsung J3 (SM-J320F/DS) FRP Reset

Samsung J3 (SM-J320F/DS) FRP Reset

210813070930575838.png
​
 
فيصل16

فيصل16

:: مشرف قسم Sigma/Z3x/Octoplus ::
إنضم
16 سبتمبر 2012
المشاركات
3,136
مستوى التفاعل
2,975
النقاط
113
Samsung J5 (SM-J500H/DS) FRP Reset

Samsung J5 (SM-J500H/DS) FRP Reset

210813071257356046.png
​
 
Ahmed-GsM

Ahmed-GsM

:: مراقب قسم السوفت ويير والبرمجة ::
إنضم
11 نوفمبر 2019
المشاركات
2,599
مستوى التفاعل
1,796
النقاط
113
الإقامة
BARIKA
رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

Oppo Reno 2F (CPH1989) FRP Reset



162929333911991.png
 
mounirblidaa

mounirblidaa

عضو أساسي
إنضم
5 أبريل 2016
المشاركات
784
مستوى التفاعل
520
النقاط
93
الإقامة
BLIDA BLIDA
رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

Huawei Honor 7A Pro AUM-L29 FRP RESET

p_2061noqj31.png


p_2061w55im1.png
 
فيصل16

فيصل16

:: مشرف قسم Sigma/Z3x/Octoplus ::
إنضم
16 سبتمبر 2012
المشاركات
3,136
مستوى التفاعل
2,975
النقاط
113
IRIS Vox Pop Pro FRP Reset

IRIS Vox Pop Pro FRP Reset

210912102359467285.png
​

كود: 
Operation : MTK One ClickHold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM3
Port Name: MediaTek USB Port_V1633 (COM3)
Path: \\?\usb#vid_0e8d&pid_0003#5&2bccd040&0&1#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0335, [MT6737]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: False
SLA: False
DA Auth: False
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
Disable Auth Success
Preloader saved as : preloader_k37mv1_bsp_210825_122449.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1633 (COM3)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Brand : IRIS
Manufacturer : IRIS
Model : [COLOR=#ff0000]VOX POP Pro[/COLOR]
Prod. Name : VOX_POP_Pro
Device : VOX_POP_Pro
Build Date : Tue Aug 28 20:07:03 CST 2018
Build Flavor : full_k37mv1_bsp-user
Build Desc. : VOX_POP_Pro-user 8.1.0 O11019 1535458043 release-keys
Android Ver. : 8.1.0
Display ID : IRIS_VOX_POP_Pro_V05_20180828
Patch Level : 2018-08-05
Board : VOX_POP_Pro
Platform : mt6737m
Board : VOX_POP_Pro
Platform : mt6737m
Userdata is ENCRYPTED
Seeking FRP Data...
[COLOR=#ff0000]Resetting FRP...[/COLOR]
[COLOR=#ff0000]- Success![/COLOR]
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.4]
 
فيصل16

فيصل16

:: مشرف قسم Sigma/Z3x/Octoplus ::
إنضم
16 سبتمبر 2012
المشاركات
3,136
مستوى التفاعل
2,975
النقاط
113
IRIS G7060 FRP Reset

IRIS G7060 FRP Reset

210912102920191183.png
​


كود: 
Operation : MTK One ClickHold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM3
Port Name: MediaTek USB Port_V1633 (COM3)
Path: \\?\usb#vid_0e8d&pid_0003#5&2bccd040&0&1#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0335, [MT6737]
Hardware Info: 0x8A00, 0xCB00, 0x00
SecureBoot: False
SLA: False
DA Auth: False
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
Disable Auth Success
Preloader saved as : preloader_tb8735ba1_bsp_210828_171228.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1633 (COM3)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Brand : IRIS
Manufacturer : IRIS
Model : [COLOR=#ff0000]G7060[/COLOR]
Prod. Name : G7060
Device : G7060
Board : G7060
Build Date : Mon Sep 21 11:11:19 CST 2020
Build Flavor : full_tb8735ba1_bsp-user
Build Desc. : full_tb8735ba1_bsp-user 8.1.0 O11019 1599118081 release-keys
Android Ver. : 8.1.0
Display ID : G7060-IRIS-V2-20200921
Patch Level : 2020-08-05
Board : tb8735ba1_bsp
Platform : mt6737m
Board : tb8735ba1_bsp
Platform : mt6737m
Userdata is ENCRYPTED
Seeking FRP Data...
[COLOR=#0000ff]Resetting FRP...[/COLOR]
[COLOR=#0000ff]- Success![/COLOR]
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.4]
 
فيصل16

فيصل16

:: مشرف قسم Sigma/Z3x/Octoplus ::
إنضم
16 سبتمبر 2012
المشاركات
3,136
مستوى التفاعل
2,975
النقاط
113
Condor FROBUST FP211 Restore FIRMWARE from FullFlash

Condor FROBUST FP211 Restore FIRMWARE from FullFlash

210912103855861326.png
​

كود: 
Phone Storage: NOREXE: Ultimate Unisoc Module v0.1
SELECTED: SC6531EFM
ACTION: Restore FIRMWARE from FullFlash
Flash ID: [C86016] GigaDevice: [0x400000]GD25LQ32B size: 0x400000
-Loader format:OLD
Start Detect phone.
Phone must be off with battery inside.
Insert USB cable after long press boot key.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM55)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.2
Changing bautrate OK.
Send Second Loader.
Writing stone: begin: 0x0 size: 0x3BB0C8
Start write file: C:\Users\fayca\Desktop\FROBUST FP211\FROBUST FP211\SPRD_SPI_GIGADEVICE_GD25Q_4MiB.bin
Total Time: 00:01:20
Done.
 
فيصل16

فيصل16

:: مشرف قسم Sigma/Z3x/Octoplus ::
إنضم
16 سبتمبر 2012
المشاركات
3,136
مستوى التفاعل
2,975
النقاط
113
Ace BUZZ 1 PLUS FRP RESET

Ace BUZZ 1 PLUS FRP RESET

210912104851639940.png
​

كود: 
Operation : MTK One ClickHold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM4
Port Name: MediaTek USB Port_V1633 (COM4)
Path: \\?\usb#vid_0e8d&pid_0003#5&21e739f&0&3#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0699, [MT6739]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: False
SLA: False
DA Auth: False
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
Disable Auth Success
Preloader saved as : preloader_k39tv1_bsp_1g_210911_125948.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1633 (COM4)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Brand : ACE
Manufacturer : ACE France
Model : [COLOR=#ff0000]BUZZ 1 Plus[/COLOR]
Prod. Name : BUZZ_1_Plus
Device : BUZZ_1_Plus
Build Date : Tue Sep 11 00:59:53 CST 2018
Build Flavor : full_k39tv1_bsp_1g-user
Build Desc. : BUZZ_1_Plus-user 8.1.0 O11019 1535646964 release-keys
Android Ver. : 8.1.0
Display ID : AS0318_V06_20180911
Patch Level : 2018-08-05
Board : BUZZ_1_Plus
Platform : mt6739
Board : BUZZ_1_Plus
Platform : mt6739
Userdata is ENCRYPTED
Seeking FRP Data...
[COLOR=#ff0000]Resetting FRP...[/COLOR]
[COLOR=#ff0000]- Success![/COLOR]
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.4]
 
andi-gsm

andi-gsm

:: عضو مميز ::
إنضم
10 مايو 2018
المشاركات
1,154
مستوى التفاعل
654
النقاط
113
الإقامة
alger
رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

Oppo A15 (CPH2185) pattern unlock

Capture.png


كود: 
Brand : Oppo
Model : A15 (CPH2185)
Operation : Format FS
Connection Mode : BROM (Hold Key for BROM Mode)
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM17
Port Name: MediaTek USB Port (COM17)
Path: \\?\usb#vid_0e8d&pid_0003#6&2953c98d&0&1#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: False
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
Disable Auth Success
Preloader saved as : preloader_oppo6765_210912_133315.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM17)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Build Date : Wed Aug 11 23:39:41 CST 2021
Build Flavor : full_oppo6765-user
Build Desc. : full_oppo6765-user 10 QP1A.190711.020 bedd37e98646d3a1 release-keys
Android Ver. : 10
Display ID : QP1A.190711.020 release-keys
Patch Level : 2021-08-05
Userdata is NOT ENCRYPTED
Formatting userdata...
- Done.
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.4]
 
التعديل الأخير:
andi-gsm

andi-gsm

:: عضو مميز ::
إنضم
10 مايو 2018
المشاركات
1,154
مستوى التفاعل
654
النقاط
113
الإقامة
alger
رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

Infinix S3X dead boot fix

كود: 
Operation	: Flash
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port	: Qualcomm HS-USB QDLoader 9008 (COM9)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID	: 0000000000000000 [8937] 00000000
OPK_DATA	: 000000000000000000000000000000000000000000
Initializing Protocol...OK
Using Auto Loader Selection [3]
Device may possibly not boot with this loader.
Preparing Loader...Done
Sending Loader [8937]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware	: 8937, EMMC, 32 GB
LU Count	: 1 [0x03A3E000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [4096], Out: 1048576, Sector Size: 512
Writing [NON-HLOS.bin] -> [modem] ...Done
Writing [sbl1.mbn] -> [sbl1] ...Done
Writing [sbl1.mbn] -> [sbl1bak] ...Done
Writing [rpm.mbn] -> [rpm] ...Done
Writing [rpm.mbn] -> [rpmbak] ...Done
Writing [tz.mbn] -> [tz] ...Done
Writing [tz.mbn] -> [tzbak] ...Done
Writing [devcfg.mbn] -> [devcfg] ...Done
Writing [devcfg.mbn] -> [devcfgbak] ...Done
Writing [adspso.bin] -> [dsp] ...Done
[PROTECTIVE_FLASH] Skipping [st1] -> [modemst1]
[PROTECTIVE_FLASH] Skipping [st2] -> [modemst2]
Writing [fsall_image.tar.gz.mbn.img] -> [fsgall] ...Done
Writing [emmc_appsboot.mbn] -> [aboot] ...Done
Writing [emmc_appsboot.mbn] -> [abootbak] ...Done
Writing [boot.img] -> [boot] ...Done
Writing [recovery.img] -> [recovery] ...Done
Writing [devinfo.bin] -> [devinfo] ...Done
Writing [persist_1.img] -> [persist] ...Done
Writing [config.bin] -> [config] ...Done
Writing [mdtp.img] -> [mdtp] ...Done
Writing [cmnlib_30.mbn] -> [cmnlib] ...Done
Writing [cmnlib_30.mbn] -> [cmnlibbak] ...Done
Writing [cmnlib64_30.mbn] -> [cmnlib64] ...Done
Writing [cmnlib64_30.mbn] -> [cmnlib64bak] ...Done
Writing [keymaster64.mbn] -> [keymaster] ...Done
Writing [keymaster64.mbn] -> [keymasterbak] ...Done
Writing [oem.bin] -> [oem] ...Done
Writing [cache_1.img] -> [cache] ...Done
Writing [cache_2.img] -> [cache] ...Done
Writing [cache_3.img] -> [cache] ...Done
Writing [splash.img] -> [splash] ...Done
Writing [vendor_1.img] -> [vendor] ...Done
Writing [vendor_2.img] -> [vendor] ...Done
Writing [vendor_3.img] -> [vendor] ...Done
Writing [vendor_4.img] -> [vendor] ...Done
Writing [vendor_5.img] -> [vendor] ...Done
Writing [vendor_6.img] -> [vendor] ...Done
Writing [vendor_7.img] -> [vendor] ...Done
Writing [vendor_8.img] -> [vendor] ...Done
Writing [vendor_9.img] -> [vendor] ...Done
Writing [vendor_10.img] -> [vendor] ...Done
Writing [vendor_11.img] -> [vendor] ...Done
Writing [vendor_12.img] -> [vendor] ...Done
Writing [vendor_13.img] -> [vendor] ...Done
Writing [system_1.img] -> [system] ...Done
Writing [system_2.img] -> [system] ...Done
Writing [system_3.img] -> [system] ...Done
Writing [system_4.img] -> [system] ...Done
Writing [system_5.img] -> [system] ...Done
Writing [system_6.img] -> [system] ...Done
Writing [system_7.img] -> [system] ...Done
Writing [system_8.img] -> [system] ...Done
Writing [system_9.img] -> [system] ...Done
Writing [system_10.img] -> [system] ...Done
Writing [system_11.img] -> [system] ...Done
Writing [system_12.img] -> [system] ...Done
Writing [system_13.img] -> [system] ...Done
Writing [system_14.img] -> [system] ...Done
Writing [system_15.img] -> [system] ...Done
Writing [system_16.img] -> [system] ...Done
Writing [system_17.img] -> [system] ...Done
Writing [system_18.img] -> [system] ...Done
Writing [system_19.img] -> [system] ...Done
Writing [system_20.img] -> [system] ...Done
Writing [system_21.img] -> [system] ...Done
Writing [system_22.img] -> [system] ...Done
Writing [system_23.img] -> [system] ...Done
Writing [system_24.img] -> [system] ...Done
Writing [system_25.img] -> [system] ...Done
Writing [system_26.img] -> [system] ...Done
Writing [system_27.img] -> [system] ...Done
Writing [system_28.img] -> [system] ...Done
Writing [system_29.img] -> [system] ...Done
Writing [system_30.img] -> [system] ...Done
Writing [system_31.img] -> [system] ...Done
Writing [system_32.img] -> [system] ...Done
Writing [system_33.img] -> [system] ...Done
Writing [system_34.img] -> [system] ...Done
Writing [system_35.img] -> [system] ...Done
Writing [system_36.img] -> [system] ...Done
Writing [system_37.img] -> [system] ...Done
Writing [system_38.img] -> [system] ...Done
Writing [system_39.img] -> [system] ...Done
Writing [system_40.img] -> [system] ...Done
Writing [system_41.img] -> [system] ...Done
Writing [system_42.img] -> [system] ...Done
Writing [system_43.img] -> [system] ...Done
Writing [system_44.img] -> [system] ...Done
Writing [userdata_1.img] -> [userdata] ...Done
Writing [userdata_2.img] -> [userdata] ...Done
Writing [userdata_3.img] -> [userdata] ...Done
Writing [userdata_4.img] -> [userdata] ...Done
Writing [userdata_5.img] -> [userdata] ...Done
Writing [userdata_6.img] -> [userdata] ...Done
Writing [userdata_7.img] -> [userdata] ...Done
Writing [userdata_8.img] -> [userdata] ...Done
Writing [userdata_9.img] -> [userdata] ...Done
Writing [userdata_10.img] -> [userdata] ...Done
Writing [userdata_11.img] -> [userdata] ...Done
Writing [userdata_12.img] -> [userdata] ...Done
Writing [userdata_13.img] -> [userdata] ...Done
Writing [userdata_14.img] -> [userdata] ...Done
Writing [userdata_15.img] -> [userdata] ...Done
Writing [userdata_16.img] -> [userdata] ...Done
Writing [userdata_17.img] -> [userdata] ...Done
Writing [userdata_18.img] -> [userdata] ...Done
Writing [userdata_19.img] -> [userdata] ...Done
Writing [userdata_20.img] -> [userdata] ...Done
Writing [userdata_21.img] -> [userdata] ...Done
Writing [userdata_22.img] -> [userdata] ...Done
Writing [userdata_23.img] -> [userdata] ...Done
Writing [userdata_24.img] -> [userdata] ...Done
Writing [userdata_25.img] -> [userdata] ...Done
Writing [userdata_26.img] -> [userdata] ...Done
Writing [userdata_27.img] -> [userdata] ...Done
Writing [userdata_28.img] -> [userdata] ...Done
Writing [userdata_29.img] -> [userdata] ...Done
Writing [userdata_30.img] -> [userdata] ...Done
Writing [userdata_31.img] -> [userdata] ...Done
Writing [userdata_32.img] -> [userdata] ...Done
Writing [userdata_33.img] -> [userdata] ...Done
Writing [userdata_34.img] -> [userdata] ...Done
Writing [userdata_35.img] -> [userdata] ...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Resetting device...Done
Operation Finished.
QcFire Ver. 7.2
 
التعديل الأخير:
D

doux-dur

عضو نشط
إنضم
1 مارس 2016
المشاركات
43
مستوى التفاعل
11
النقاط
0
الإقامة
َAlgeria
رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

السلام عليكم ورحمة الله و بركاته
Oppo Reno3 (CPH2043) Unlock & FRP ​
Sans-titre1.jpg

Sans-titre2.jpg

Screenshot-2021-09-14-00-14-47-82-fc704e6b13c4fb26bf5e411f75da84f2.jpg4e6b13c4fb26bf5e411f75da84f2.jpg
 
التعديل الأخير:
D

doux-dur

عضو نشط
إنضم
1 مارس 2016
المشاركات
43
مستوى التفاعل
11
النقاط
0
الإقامة
َAlgeria
التعديل الأخير:
.:: Mohamed Gsm ::.

.:: Mohamed Gsm ::.

:: مراقب البوكسات والبرامج المحمية ::
إنضم
2 أبريل 2017
المشاركات
5,098
مستوى التفاعل
5,328
النقاط
113
الإقامة
سيدي بلعباس
رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

Xiaomi Redmi Go [tiare]

Mi Account Remove
163303270595691.png


كود: 
[COLOR="#2F4F4F"][B]Operation	: [COLOR="#FF0000"]Reset Mi Account (New)[/COLOR]
Checking for existing devices...Found
Port	: Qualcomm HS-USB QDLoader 9008 (COM9)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID	: E1600500 [8917] 00000000
OPK_DATA	: 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware	: 8917, EMMC, 16 GB
LU Count	: 1 [0x01D1F000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device	:[COLOR="#0000FF"] Xiaomi Redmi Go[/COLOR] [[COLOR="#FF0000"]tiare[/COLOR]]
Brand	: Xiaomi
Prod.Name	: tiare_in
Software	: OPM1.171019.026.V[COLOR="#FF8C00"]10.2.16.0.OCLINXM[/COLOR], V10.2.16.0.OCLINXM [Mon Jul 20 12:10:38 WIB 2020]
Android Ver.	: 8.1.0
Patch Level	: 2020-07-05
Reading Data[1]...Done
Patching Data...Done
Writing Data...Done
Reading Data[2]...Done
Writing Data...Done
Operation Finished.
QcFire Ver. 7.3[/B][/COLOR]
 
.:: Mohamed Gsm ::.

.:: Mohamed Gsm ::.

:: مراقب البوكسات والبرامج المحمية ::
إنضم
2 أبريل 2017
المشاركات
5,098
مستوى التفاعل
5,328
النقاط
113
الإقامة
سيدي بلعباس
رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

163311849552171.png


كود: 
[COLOR="#000000"][B]Operation	: [COLOR="#006400"]Reset FRP[/COLOR]
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port	: Qualcomm HS-USB QDLoader 9008 (COM39)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID	: E1600400 [8953] 00000000
OPK_DATA	: 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [2]
Preparing Loader...Done
Sending Loader [8953_010]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware	: 8953, EMMC, 16 GB
LU Count	: 1 [0x01D5A000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device	: [COLOR="#0000FF"]SPA Condor Electronics Plume H1 [msm8953] [SP620][/COLOR]
Brand	: [COLOR="#FF0000"]Condor[/COLOR]
Prod.Name	: [COLOR="#FF0000"]SP620[/COLOR]
Software	: N2G47H release-keys, 2578 [Mon Apr 16 17:07:45 CST 2018]
Android Ver.	: 7.1.2
Patch Level	: 2018-03-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 7.3[/B][/COLOR]
 
Ahmed-GsM

Ahmed-GsM

:: مراقب قسم السوفت ويير والبرمجة ::
إنضم
11 نوفمبر 2019
المشاركات
2,599
مستوى التفاعل
1,796
النقاط
113
الإقامة
BARIKA
رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

SAMSUNG M01s (SM-M017F/DS) Reset FRP One Click




163324868990121.png
 
Ahmed-GsM

Ahmed-GsM

:: مراقب قسم السوفت ويير والبرمجة ::
إنضم
11 نوفمبر 2019
المشاركات
2,599
مستوى التفاعل
1,796
النقاط
113
الإقامة
BARIKA
رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

LG W41 Pro (LMK610IM) FORMAT FS + RESET FRP




163439005998871.png
 
.:: Mohamed Gsm ::.

.:: Mohamed Gsm ::.

:: مراقب البوكسات والبرامج المحمية ::
إنضم
2 أبريل 2017
المشاركات
5,098
مستوى التفاعل
5,328
النقاط
113
الإقامة
سيدي بلعباس
رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

REMOVE FRP Condor TB105L [MT6737M]

331848328.png


كود: 
[COLOR="#000000"][B]Operation : [COLOR="#FF0000"]Reset FRP[/COLOR]
CPU : MT6737M
Storage : EMMC
DA : MTK_AllInOne_DA.bin [MTK_AllInOne_DA_v3.3001.01/21/2021.12:51]
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM (Android) (COM5)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Brand : [COLOR="#FF0000"]Condor[/COLOR]
Manufacturer : [COLOR="#FF8C00"]SPA Condor Electronics[/COLOR]
Model : TB105L
Prod. Name : TB105L
Device : [COLOR="#EE82EE"]TB105L[/COLOR]
Build Date : 2018年 03月 11日 星期日 15:19:59 CST
Build Flavor : full_elink8735b_p3h-user
Build Desc. : TB105L_MTK8735_1G+16G_V1.0.0_20180311
Platform : mt6737m
Android Ver. : 7.0
Display ID : TB105L_MTK8735_1G+16G_V1.0.0_20180311
Patch Level : 2018-01-05
Data missing! Could not read extended information!
Userdata is ENCRYPTED
Resetting FRP...
[COLOR="#00FFFF"]FRP Reset Done.
[/COLOR]Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.4[/B][/COLOR]]
 
يجب تسجيل الدخول أو التسجيل كي تتمكن من الرد هنا.
أعلى